1897 questions

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1265 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

1013 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
1061 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
944 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

836 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1107 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1118 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1220 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

997 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1229 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1211 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
948 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1847 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1145 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

1067 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1503 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1271 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1526 views
Mar 25, 2021 at 01:02 PM

No thumbnails

I have WIndows 10 that is up-to-date. It has suddenly stopped displaying thumbnails of pictures (jpeg). It seems that t his is a common problem. I have taken several recommended procedures (from https://www.windowscentral.com/how-reset-thumbnail-cache-windows-10) to overcome the problem without benefit.

Can you help?
1659 views
Mar 24, 2021 at 05:13 PM

Глубокая очистка файлов

Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин

1026 views
Mar 23, 2021 at 07:21 AM

acronis power plan

I used to have acronis power plans available. I no longer have them. How do I install them and where do I get them? I had them a month or so ago but when I did a new install it was not availab.e\\le

1613 views
Jan 05, 2020 at 09:27 PM

Defrag

I'm using your standard Auslogics Disk Defran 10, and can never get the level of defrag to less that 13% on my Win 7 disk. No other defrag programs have been able to do any better, the inherent Win defrag running for hours with no improvement.
Any idea how I can resolve this?
Thanks

1612 views
Aug 29, 2021 at 12:31 AM

Problema con servidor de internet y administrador de dispositivos

Whenever I restart my pc, it does not want to connect to the internet, it appears connected but does not open internet pages, and the error solver says, it fails in the router dns, but it is not that, because in other devices it works fine, I must restart the internet modem or take out the ethernet cable until the line comes back, my service provider came and checked with his laptop, it works fine, they told me there is a problem on my pc. To connect the ethernet cable I use a HUB (photos) because my laptop does not have a direct connection to ethernet, and for some time, when I installed AUSLOGICS BOOTSPEED, I did some programming and it gave me an error in the device driver desktop, I don't know if that is doing something on my pc, I don't like to be connecting and disconnecting the ethernet cable, because it is supposed to work, no need to reboot or remove the cable. Since I installed AUSLOGICS BOOTSPEED, I HAVE GOT SEVERAL BUGS IN MY PC, I DON'T KNOW IF THEY CAN HELP ME TO SOLVE IT. I already tried everything.
1609 views
Nov 13, 2020 at 07:22 PM

Auslogic BoostSpeed 11

Buongiorno, recentemente nonostante l'aggiornamento, quando effettuo la scansione sulla modalità Protezione la ricerca si blocca.
Per la precisione, il programma riesce ad analizzare le trcce sul browser e nei file di sistema, ma non nelle applicazioni bloccandosi dopo avere analizzato il 32%. Ho provato a disinstallare il programma e reinstallarlo con la versione aggiornata senza risultato.
Grazie per l'eventuale aiuto.
Buona giornata
Stefano Carovani

1606 views
Mar 14, 2020 at 02:54 PM

suddenly the cpu usage comes to 100%

Sometimes the cpu usage comes to 100%

1606 views
Mar 26, 2020 at 04:12 PM

SLOW NETWORK PERFORMANCE

BROWSER, eDGE, eXPLORER 11, CHROME ARE FREEZING AND ARE OPERATING SLOWER. i KNOW THAT TOOLS HAVE A WAY OF IMPROVING PERFORMANCE BUT AFER OPTIMIZING IS WHEN IT STARTED. i DONOT KNOW THE BEST MAUAL SPECIFICATIOS.
wHAT IS THE BEST WAY TO FIX THIS?

1603 views
Feb 18, 2020 at 07:19 PM

Error code 0x80071a91

Hey,
I have tried to update Windows 10 many times already, have performed clean boots, ran the troubleshooter and so on, but I keep getting this error (0x80071a91). What should I do?
1600 views
Nov 26, 2020 at 08:00 AM

Языковая панель

Пропала языковая панель

1600 views
Feb 26, 2020 at 11:42 AM

Samsung Kies Software side by side configuration

Hi guys. I am running a brand new installation of Windows 10, and i am attempting to install Samsung Kies to sync with my Samsung Galaxy S10+ smartphone, and it says that there is a side by side configuration error.

1594 views
Nov 26, 2019 at 07:25 PM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1593 views
Apr 18, 2020 at 05:41 PM

transferring windows

Hello and thank you for your time,
I am having trouble with finding info relative to my specific situation. I own an Asus ROG Strix GL553VD with 16 GB ram and it came with the 1 TB HDD. Ive since upgraded it to a 500 GB SSD by WD Blue as of recetly Ive also added a 120 GB NVMe m.2 SSD and Id really like to be ablr to add my whole windows OS and boot from it to achieve faster results plus Ive heard its less stress on your main drive. I recently tried copying the windows folder to it (and all 26 or so GB that it held) onto the new SSD and that obv didnt work. I have AOMEI partition pro and back upper but my Windows OS isnt on its own partition on C drive and Im finding nothing about migrating just those files or how to create a partition of just those files and I see nothing about migrating from SSD to a different SSD. Thank you for your time and potential help!

1585 views
Jan 01, 2020 at 08:17 AM

BootSpeed 12

How can I move "BootSpeed 12" to clean up my wifes computer?

1583 views
Feb 25, 2021 at 08:15 PM

used auslogics freeupdater tool after that was given message please wait while updating.

I have premium I used the auslogics free updater to download updates and dnow my computer is bootlooping it dosent even get to the windows screen what can I do I have all sorts of problems with your software please adise what I can do pc boots then turns off boots then turns of or tries to boot,this was fater I updated a driver that I was told was out of date by your system.

1579 views
Jan 31, 2020 at 02:27 AM

Add on Hardware recommendation

I'm thinking about installing "xtra PC" to rev up my Desktop. Does it really work?
If not, does boostspeed have a way of identifying bloatware?
Thank you!

1575 views
Jan 05, 2020 at 08:39 PM

I2C

Hi Folks;
What can you tell me about I2C This device cannot start. (Code 10).

I have tried many fixes with no success.

This is the Touch Screen driver in an HP Envy 360.

Thanks.

George Jamison
1569 views
Jul 25, 2020 at 04:12 PM

Japanese IME Not Working After Using Auslogics Boost Speed

As it says on the title - after using Auslogics Boost Speed to clean up my computer, my Japanese IME stopped working. The options to input using the various keyboards disappeared and reinstalling the language did nothing. Restarted my computer, tried fiddling around and it won't come back. I've attached a picture of how it should look normally and how it looks now. Any help with getting it back would be appreciated.

1565 views
Nov 22, 2019 at 09:20 PM

Cookies

I have problems with software deleting the cookies of the bank and credit cards I have been using. Everytime I do the sacan I had a hard time getting to my bank and credit cards that I have been using. I have to go thru a security questions all over again. What to do to avoid this repeated problems. For having thiese problems, I am afraid to do the scan. Please help me solving these problems. Thank you,

1565 views
Jan 14, 2020 at 04:09 AM

Auslogics Driver Updater

Почему ваша программа Driver Updater 1.23.0.2 определяется антивирусом Windows Defender как вирус и автоматически удаляется из системы? Даже установочный фаил скачанный с вашего сайта классифицируется как зловредная программа и сразу удаляется. Почему так происходит?

1564 views
Mar 28, 2020 at 01:52 AM

Windows 10 Disc Optimizer

I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.

1564 views
May 20, 2020 at 02:09 PM

Microsoft services malfunctioning

The Microsoft services are not working properly and some of it's features like EPIC GAMES and MICROSOFT STORE are not working. Can you help me solve that issue on my computer?
:D

1563 views
May 16, 2020 at 02:21 AM