1859 questions
Defrag external usb drive?
Hello,
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
Thumbnail
Bonjour,
Les aperçus des miniatures ne s'affichent plus dans Windows 10, pour les vidéos uniquement, les vignettes des photos s'affichent ! !
Les aperçus des miniatures ne s'affichent plus dans Windows 10, pour les vidéos uniquement, les vignettes des photos s'affichent ! !
Windows 10 install software as admin
Request a report on what happened to my computer last year during the 12 months when it was attacked by powerful viruses and completely disabled - restore all settings, folders and data, solve device problems on (C, B)
fonctionnement quotidien
Bonjour,
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
Auslogics scans
I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
Registry Cleaner
Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish
I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
Defragmentierung einer virtuellen Festplatte
Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
Cannot reinstall MS365 after gone missing
my current & active MS365 suite just vanished from the system, and when I try to download/install the apps on my laptop, it get all the way through the process untl final 10% when get error mressage 30015-11(3221225506). I have dismounterd all system defence software (firewalls, defender, anti-virus) while downloading to remove these as potential constraints, and I have enabled the Windows Update features on the services list (cmd - services.msc)- which were showing as disabled. These however always revert back to 'disabled' once leave the page/screen. I also ran sfc /scannow to check for corrupted files - but all good. Can you assist please
Microsoft activation request when there is already validated OEM version on laptop
How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
habe doch freischaltcode von computerbild
warum kann ich nicht freischalten, wenns nicht geht dann behaltet es eben da bin ich weg
Nach Scannen und alles reparieren kein W-Lan
Nach Scannen und alles reparieren kein W-Lan mehr.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
Windows 11 Task Bar Not on Top
In Windows 11, when I move the cursor to the bottom of the screen, the task bar does not pop up unless I touch a corner of it. And when it does pop up, it doesnot pop up on top of other windows on the screen. Is this a known issue with windows 11 or is thjere a setting I'm missing?
Keith Johnson
Keith Johnson
Unstable screen images
My screen images can shake slightly and a purple haze appears on and off. Sometimes computer won't restart. Please advise.
corrupt window 10
can you fix it - micosoft support cant, need to instal new version., windows softare install fails rest option fails
Löschen von Dateien
Hallo
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss
Antwort bitte in deutsch.
bei mir ist eine " .pfx" Datei verschwunden. Unter Schnellzugriff wird sie noch aufgeführt. Im angegebenen Pfad steht sie nicht mehr. Was kann der Grund sein?
Herzliche Grüsse
Norbert Anderss
Antwort bitte in deutsch.
Addressing a specific drive
Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
Getting different kinds of BSOD's
Hello and good morning, I'm not very good at softwares and know-how's on PC but I've tried using this program to probably fix the cause of what could be causing the BSOD's on my PC. After I tried to use the Auslogics Driver Updater, I updated some of the drivers and it asked me to restart so I did. After I restarted, the pc kept giving me a BSOD where it was written something like: Boot device inaccessible. So I couldn't even put the password and login properly. I had to restore the data to a certain point so I could get my pc back. I'm not sure what the problem is yet so I decided to write this message to you and ask for a helping hand.
Thank you in advance for your time,
Pedro
Thank you in advance for your time,
Pedro
Unable to open any image file via photos
I am getting an error when i am double clicking an image file, which normally used to open with "photos" app.
The error is "No such interface supported"
The error is "No such interface supported"
BoostSpeed always errors off
I installed 3 times and did 3 scans but each time it said:
Error EDrive not found Exception. Drive could not be found.
What can I do?
Error EDrive not found Exception. Drive could not be found.
What can I do?
Free disk space issue
I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
проблема с компом
здраствуйте,помогите с проблемой. Компьютер очень сильно глючит ,возможно это связано с устнавления какого то вируса? что можно сделать в ситуации?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
printer does not print after running Auslogic
can you help to sort out problem with printing after "optimisation" of notebook by running Auslogic. Aslo smart car readerstopped working. Card reader was not recognised, one of the services was disabled by the Booster. Smart card reader problem was solved by enabling the service, but the printer does not work still.
external hard drive recovery
so i have ran check disk a few times on a external hard drive to see if i can possibly repair the thing and if not recover some things that are still on it. windows does not recognize the drive but 3rd party software does, so as i'm running check disk it sees one bad sector like at somewhat of the begging of the scan then it continues and runs almost to the end of the scan but does'nt qiute finish the scan, instead it suddenly stops, the screen goes black for a second and then it reboots windows and thats it. no log of what happened at the time of crash or the condition of the drive or the end result...nothing. so i'm wondering if you can shed some light on the situation and maybe some remedies if any? thanks, cweklund
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
メモリーを有効利用
CADソフト等を利用していると、メモリー不足から動作が遅くなり、場合によっては稼働しなくなります。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
メモリーは32GB搭載していますが有効に使用できていないようです。
Auslogics BoostSpeed12で、メモリー管理の設定がありますか。
Auslogics Boost speed
I subscribed to Boost spoeed 9 a while ago and it worked as expected.. It had a function of Scan Repair and sleep.. good for the end of the day.
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
However as the program is up dated it no longert has that function and I find I have to buy a new licence for each up date. . With out the scan repair and sleep ,it seems not now wortyh paying for more up dates.
What can i do and shall i lookj for another program that will do that for me
Thank you
Bob Parr
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride