1897 questions
Исправление неполадки
Установил на ноутбуке Lenovo программу Auslogics BoostSpeed, провел сканирование и по рекомендации программы дал команду на исправление обнаруженных ошибок. Программа очень долго загружала обновления, затем ноут выдал сообщение о невозможности их инсталяции и начал "откатывать" начальную версию (тоже очень долго). После переустановки ноутбук не видит Интернета. Таким образом, я не могу восстановить его нормальную работу. Что посоветуете?
WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install
WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install
ERROR / CRASH
I was using Thunderbird Portable e-mail client from my external drive [1TB capacity] for years before the crash. I am not sure if your IT specialist can assit me to solve this [ see attached ] I have 300K+ e-mails in it but since 4/10/24 when i tried to open it , the crash pop-up appeared. Due to this, I have to keep aside my external drive [ if plugged into my PC will shows as Driive D: ] and reinstal a fresh Thunderbird mail client to my laptop under Drive C: Only new e-mails from 4/10/24 are visible and I still hoping the old e-mails from Drive D: can still be recovered . Thank you for listening to my issue and really hope oyu can help .
new windows download
How can I use my Auslogics subscription with my new windows download. The hard drive had to be wiped and I lost the Auslogics program.
Auslogics BoostSpeed pop up window
I use my PC for public presentions and so the pop up window encouraging me to upgrade to Pro version is not acceptable. Is there a way I can prevent that pop up short of uninstalling BoostSpeed ?
BY the way, the Subcategory of Tips, or anything else has no relevance to the question, but had to select somwthing to submit the question.
thank you
BY the way, the Subcategory of Tips, or anything else has no relevance to the question, but had to select somwthing to submit the question.
thank you
Windows Update
Content hidden to protect privacy
ASUS N73SV init W7 updated W10 NoVirus NoBug Regularly optimized
Bonjour,
Depuis plusieurs mois, toutes les mises à jour du type "Mise à jour de fonctionnalitré vers Windows 10 - 22H2" se terminent avec un code erreur 0x8007001f. Cela se reproduit tous les jours maintenant.
Mes tentatives de correction du problème n'ont pas abouti. Merci de m'aider.
Je ne suis pas un expert Microsoft.
You are my only first hand help
Friendly yours
Jean Farny
FILE DUPLICATI
Buon pomeriggio
Premesso che il software AUSLOGICS è straordinario e da solo è sufficiente per la gestione di un normale PCDESK (nel mio caso un ottimo ASUS + WINDOWS 10 PRO 64 BIT + GOOGLE CHROME), incontro un problema quando intendo eliminare on line decine e decine di file audio che corrispondono ad altrettanti file di brani musicali (circa 10.000!!!) scaricati e archiviati sul portale on line MEDIA CENTER del software multimediale JRIVER (USA).
Questo maledetto software, in abbonamento annuale, con gli anni è diventato sempre più cervellotico e difficile da utilizzare, avendo un sacco di funzioni e di opzioni.
L'unico aspetto che non è stato curato dai programmatori è appunto la cancellazione dei file duplicati 1 volta o +volte. Per assurdo JRiver permette questa eleminazione SOLO PROCEDENDO CON UN BRANO MUSICALE PER VOLTA!!!!
Purtroppo, anche il programma di ricerca dei file audio duplicati del Vostro software AUSLOGICS, fornisce il risultato di pochi file individuati, mentre io sono sicuro che ne esistono centinaia da eliminare.
Il sito web in oggetto è il seguente: https://jriver.com/download.html e l'ultima versione è la 33.
Ringrazio in anticipo per l'attenzione e mi auguro che possiate aiutarmi con la procedura corretta.
Giancarlo Perani - Bergamo - Italia
Premesso che il software AUSLOGICS è straordinario e da solo è sufficiente per la gestione di un normale PCDESK (nel mio caso un ottimo ASUS + WINDOWS 10 PRO 64 BIT + GOOGLE CHROME), incontro un problema quando intendo eliminare on line decine e decine di file audio che corrispondono ad altrettanti file di brani musicali (circa 10.000!!!) scaricati e archiviati sul portale on line MEDIA CENTER del software multimediale JRIVER (USA).
Questo maledetto software, in abbonamento annuale, con gli anni è diventato sempre più cervellotico e difficile da utilizzare, avendo un sacco di funzioni e di opzioni.
L'unico aspetto che non è stato curato dai programmatori è appunto la cancellazione dei file duplicati 1 volta o +volte. Per assurdo JRiver permette questa eleminazione SOLO PROCEDENDO CON UN BRANO MUSICALE PER VOLTA!!!!
Purtroppo, anche il programma di ricerca dei file audio duplicati del Vostro software AUSLOGICS, fornisce il risultato di pochi file individuati, mentre io sono sicuro che ne esistono centinaia da eliminare.
Il sito web in oggetto è il seguente: https://jriver.com/download.html e l'ultima versione è la 33.
Ringrazio in anticipo per l'attenzione e mi auguro che possiate aiutarmi con la procedura corretta.
Giancarlo Perani - Bergamo - Italia
Mapa de desfragmentação
Bom dia. Como posso configurar para que o Auslogics Disk Defrag 11, mova os "quadradinhos" que são moviveis para espaços vagos no inicio do disco? Em versões anteriores do Disk Defrag, ele movia os arquivos "verdes" para espaços vahos no inico do disco. Obviamente não estou me referindo aos arquivos de sistema que não podem ser movidos. Obrigado.
Windows 10 CD Drive not working but showing as "working properly"
My CD drive has stopped working. It has power, opens and starts spinning but then nothing. When I click on CD drive in system information I get Can`t Collect Information cannot access the Windows management instrumentation software. Windows management files may be moved or missing. I am working through all resolutions on youtube but getting nowhere. You can see from the attached screen shot their are no IDE/ATA ATAPI files listed. Help
No activation key
Hello,
I paid for AuslogicsBoostSpeed 13 subscribtion. However, I never got the activation key.
Thanks.
Regards.
Richard.
I paid for AuslogicsBoostSpeed 13 subscribtion. However, I never got the activation key.
Thanks.
Regards.
Richard.
Хочу вручную найти файлы этого приложения
Дорбый день БустСпид!Хотел вручную найти файлы по названию которые хочу удалить и не могу найти в вашей программе как это сделать!Или я не вижу или у вас нет такой возможности!?
К примеру - хочу удалить полностью из системы Windows10 программу skype или cortana и как мне это сделать?Даже если я удалю стандартными методами системы все равно останутся следы,я бы хотел вручную найти все файлы относящиеся к этим программам удалить их,а потом еще и в реестре почистить записи,так чтобы уже с концами наверняка,чтобы они не висели в системе и не жрали ресурсы и не замедляли систему!
К примеру - хочу удалить полностью из системы Windows10 программу skype или cortana и как мне это сделать?Даже если я удалю стандартными методами системы все равно останутся следы,я бы хотел вручную найти все файлы относящиеся к этим программам удалить их,а потом еще и в реестре почистить записи,так чтобы уже с концами наверняка,чтобы они не висели в системе и не жрали ресурсы и не замедляли систему!
Updater 2 saved PST files to my documents folder
I recently lost an email account in Outlook and all the folders and subfolders files with it after a Windows 10 reset. I noticed that my Updater 2 saved some PST email files to my download folders in Explorer, but I need to see if these are the files I'm missing and how do I restore them to Outlook if they are the ones I'm looking for? Thanks.
download problems
Hello, I have a curious problem on my Windows 11 PC.
I am connected directly to the LAN via ethernet to a 900Mbps fiber connection.
However, when I try to download largish files (several hundred MB or several GB) from sites like zoom, wetransfer, facebook, I often get a generic "download error" message.
I've tried download the same files on Edge and Chrome, logging out and in, opening a private/incognito window, resetting the internet settings and running diagnostics. I've also checked the internet speed and latency.
The downloads often start okay, but stop after sometimes 30-40MB or maybe even getting to 60%. Sometimes I can click on resume, but the download begins from scratch. Sometimes, I will try again a few hours or a day later, and the file(s) *might* download to completion.
Other downloads (of small image files, say) or streaming of YouTube, Netflix, etc. never seems to have a problem.
I know for sure that it's a PC configuration problem because I tried the same downloads on a Windows 10 laptop, connected to the same router via WiFi, and all the files downloaded (albeit slightly more slowly) without a hitch.
Any ideas or suggestions on what I can do next?
Thanks,
Gary
PS *I* am the IT person at our group. I have admin access to the router and the PC, of course.
I am connected directly to the LAN via ethernet to a 900Mbps fiber connection.
However, when I try to download largish files (several hundred MB or several GB) from sites like zoom, wetransfer, facebook, I often get a generic "download error" message.
I've tried download the same files on Edge and Chrome, logging out and in, opening a private/incognito window, resetting the internet settings and running diagnostics. I've also checked the internet speed and latency.
The downloads often start okay, but stop after sometimes 30-40MB or maybe even getting to 60%. Sometimes I can click on resume, but the download begins from scratch. Sometimes, I will try again a few hours or a day later, and the file(s) *might* download to completion.
Other downloads (of small image files, say) or streaming of YouTube, Netflix, etc. never seems to have a problem.
I know for sure that it's a PC configuration problem because I tried the same downloads on a Windows 10 laptop, connected to the same router via WiFi, and all the files downloaded (albeit slightly more slowly) without a hitch.
Any ideas or suggestions on what I can do next?
Thanks,
Gary
PS *I* am the IT person at our group. I have admin access to the router and the PC, of course.
System interupts
My pc freezes and task manager shows up to 100% CPU usage with system interupts
Any suggestions?
Any suggestions?
Intel (R) management
Avast pro detecte que Intel (R) management n'est pas a jour nouvelle version 2428.6.2.0 du 10 juillet disponible. Auslogics ne voit pas cette mise a jour. pourquoi ?
Bluetooth option gone after Win10Pro install
I updtaed from Win8.1 to Win10 now I have noe bluetooth option. Help
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
Is my subscription good for another device?
How many devices are covered by my subscription?
I have another laptop that I want this service on.
Guy Veasey
I have another laptop that I want this service on.
Guy Veasey
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
False alarms
I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
パソコンが熱い
パソコンの動作が遅く、動作音も大きくなり、パソコンの排気がとても熱くなって心配です。デフラグやクリーンアップすると少しの間静かになります。問題ないのでしょうか。また、どうすればいいですか?パソコン自体は5年目です。
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
Removal of leftover files and registry entries after uninstall. (crashplan)
I need to remove leftover files and settings of uninstalled software, in particular I need to remove crashplan pro in order to have a clean setup and do a new installation without any registry entries or old files.
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
won't post
Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
System rebooting by itself when launch game
System rebooting by itself when launch game I tried to clean hardware using some methods but i think my problem is with my RTX 3090 problems I think it's overheating
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
Diagnostic Policy Service Cannot Start.
Diagnostic Policy Service Cannot Start. Access is Denied – Error 5 Fix