1859 questions
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
Error 0xc1900101
Dear Sir/Madame,
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
mise à jour logiciel
Bonjour,
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Error Message
After running Bootspeed for the first time in a long time, I get the error message, "The operating system is not presently configured to run this application." It affects my Bluetooth, plus it is annoying to have the error message popup on my screen every five minutes. Do you recommend that I go to "Restore Points"? I have an early February date available.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Can't scan disk space
I've been using BoostSpeed successfully on Windows 7 for many years. It hasn't been working for the last 2 months. When it scans the disk space, it gets stuck on a temporary Skype file, and stops scanning. To fix this, I have to re-start my computer, and re-install BoostSpeed 12. My computer has been running painfully slow for the last 2 months. PLEASE HELP!
ESENT Help.
svchost (3804, R, 98) SRUJet: New log file cannot be created because the database cannot write to the log drive. The drive may be read-only, out of free disk space, misconfigured, or corrupt. Error -1032.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Eliminar una partición creada por Windows
Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Right Click Menu
Hello, My question is this: From time to time when I right mouse button click on a file on the desktop or in a folder the computer just freezes with the little blue circle turning for like 20-30 seconds before the right click menu will pop up, it does not do it all the time and seems random and there does not seem to be a reason for this, I have followed all the tutorials online that I could find and that is even why I purchased your software but nothing seems to solve this annoying issue, hopefully you can help. I am also attaching a screen shot to my computer spec details
windows photo viewer suddenly missing
since years I'm using Windows Photo Viewer to see my pictures (jpg and others)
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Graphics Card
The results of the "Maintain" application suggested that I upgrade my card from 8.1 to 9.0 and above. How do I do this?
Windows freezes frequently
I cannot seem to resolve the freezing problem. sometimes it freezes after a very short time after start-up and occassionally it works for quite sometime before it freezes again.
Do you have any suggestios what I can do to stop this or how I can find what may be causing this.
I am not a technical person so any answer have to be spoon-fed.
Thanks
Host Services for Windows Processes
Does Boost speed address excessive memory use by Host Services f or Windows Processes? This app is continually hogging 1/3 of my PC memory.
Malware install failure error
see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
cant update due to virtual box
hi
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
защита
при работе с функцией "защитить" выходит сообщение о сбое работы программы. Кнопка "защита" не устанавливается и не фиксируется на верхней строке .
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
computer shuts off
My computer unexpectandlty shuts off after 15 minutes. I check the cpu usage and its low. Not sure if the system is overheating.
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
How to setup RAID 1 on computer with MSI
I have a pair of brand new Samsung 990 Pro 2TB each NVME M.2 drives
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7