1902 questions

LÖSCHEN

Wie lösche ich fehlerhafte Updates, Bsp. KB5022730
717 views
Mar 22, 2023 at 04:44 PM

Emoji Panel in Windows 10 Home is not working.

I used to be able to insert emojis in my emails from the Windows 10 Emoji Panel (Windows Key + Period), but it stopped working and I haven't been able to find out how to fix it. Do you have a solution to my problem?

OS Name Microsoft Windows 10 Home
Version 10.0.19045 Build 19045
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-DPSS6F5
System Manufacturer HP
System Model HP Pavilion 590-p0055qe Desktop Rfrbd PC
System Type x64-based PC
System SKU X6C04AAR#ABA
Processor Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz, 3192 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date AMI F.48, 7/27/2022
SMBIOS Version 3.2
Embedded Controller Version 17.29
BIOS Mode UEFI
BaseBoard Manufacturer HP
BaseBoard Product 843B
BaseBoard Version 00
Platform Role Desktop
Secure Boot State On
PCR7 Configuration Elevation Required to View
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume3
Locale United States
Hardware Abstraction Layer Version = "10.0.19041.2728"
User Name DESKTOP-DPSS6F5\lenlo
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 12.0 GB
Total Physical Memory 11.8 GB
Available Physical Memory 5.57 GB
Total Virtual Memory 23.8 GB
Available Virtual Memory 12.9 GB
Page File Space 12.0 GB
Page File C:\pagefile.sys
Kernel DMA Protection Off
Virtualization-based security Not enabled
Device Encryption Support Elevation Required to View
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes
659 views
Mar 22, 2023 at 05:49 AM

проблема с панелью задач

перестала работать панель задач
произошло это так - включаю я пк, немного поиграл, буквально минут 15-20, и меня встретил синий экран, который не смерти, а обычный синий экран ошибки, где пишут перезагрузка, проблема с чем-то (ну вы поняли, да ведь?), после перезагрузки начались проблемы с жёсткими дисками, но я их решил, и после решения проблем с дисками перестала работать панель задач, только открываются ярлыки разных приложений, а вот системные не работают, например пуск, поиск, звук, календарь, да даже настройки не открываются! всё перепробывал! и powershell, ну команды в нём и т.д., всякие приложения.
помогите пожалуйста!
777 views
Mar 20, 2023 at 06:41 PM

File Explorer

How to activate the Mark-coloum?
629 views
Mar 17, 2023 at 04:12 PM

will Boot 13 work on windows XP?

will Boot 13 work on windows XP?
524 views
Mar 17, 2023 at 10:06 AM

Defrag external usb drive?

Hello,

How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.

Thanks,
joshua
662 views
Mar 17, 2023 at 07:31 AM

Thumbnail

Bonjour,
Les aperçus des miniatures ne s'affichent plus dans Windows 10, pour les vidéos uniquement, les vignettes des photos s'affichent ! !
673 views
Mar 16, 2023 at 11:34 AM

Windows 10 install software as admin

Request a report on what happened to my computer last year during the 12 months when it was attacked by powerful viruses and completely disabled - restore all settings, folders and data, solve device problems on (C, B)
654 views
Mar 15, 2023 at 08:51 PM

fonctionnement quotidien

Bonjour,
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
664 views
Mar 15, 2023 at 09:53 AM

Auslogics - Disk Doctor (Repair)

Hello Sir/Madam.

As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.

For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.

My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.

Regards,

Pietro Di Zanno
803 views
Mar 15, 2023 at 04:35 AM

Auslogics scans

I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
718 views
Mar 14, 2023 at 08:36 PM

Registry Cleaner

Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
672 views
Mar 14, 2023 at 01:36 PM

Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish

I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
670 views
Mar 13, 2023 at 11:13 PM

Defragmentierung einer virtuellen Festplatte

Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
614 views
Mar 13, 2023 at 09:58 AM

Cannot reinstall MS365 after gone missing

my current & active MS365 suite just vanished from the system, and when I try to download/install the apps on my laptop, it get all the way through the process untl final 10% when get error mressage 30015-11(3221225506). I have dismounterd all system defence software (firewalls, defender, anti-virus) while downloading to remove these as potential constraints, and I have enabled the Windows Update features on the services list (cmd - services.msc)- which were showing as disabled. These however always revert back to 'disabled' once leave the page/screen. I also ran sfc /scannow to check for corrupted files - but all good. Can you assist please
616 views
Mar 12, 2023 at 08:09 PM

Microsoft activation request when there is already validated OEM version on laptop

How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
801 views
Mar 12, 2023 at 07:56 PM

Start up

When I use Auslogiics to fire up It seems to take a long time befor I can use it
617 views
Mar 12, 2023 at 01:52 PM

habe doch freischaltcode von computerbild

warum kann ich nicht freischalten, wenns nicht geht dann behaltet es eben da bin ich weg
591 views
Mar 12, 2023 at 07:10 AM

Nach Scannen und alles reparieren kein W-Lan

Nach Scannen und alles reparieren kein W-Lan mehr.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
645 views
Mar 11, 2023 at 02:43 PM

Windows 11 Task Bar Not on Top

In Windows 11, when I move the cursor to the bottom of the screen, the task bar does not pop up unless I touch a corner of it. And when it does pop up, it doesnot pop up on top of other windows on the screen. Is this a known issue with windows 11 or is thjere a setting I'm missing?
Keith Johnson
503 views
Mar 10, 2023 at 02:30 PM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1546 views
Nov 24, 2020 at 02:38 AM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1545 views
Jan 03, 2021 at 09:19 PM

социальные сети

при общении в интернете мое изображение удваивается

1544 views
May 25, 2020 at 08:02 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1543 views
Mar 25, 2021 at 01:02 PM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1543 views
May 23, 2020 at 09:39 AM

Won't allow install

I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.

1542 views
Nov 08, 2021 at 04:36 PM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1540 views
Aug 17, 2020 at 09:27 AM

Can't enter settings

Can't enter settings app. Stuck at icon

1540 views
May 22, 2020 at 06:05 AM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1538 views
Jul 07, 2020 at 04:16 AM

Unused Applications - Application Logs

When doing an All Areas Scan the Disk Space never is 'Nothing Found' the result because the following files are always there:
C:\Windows\System32\SleepStudy\ScreenOn\ScreenOnPowerStudyTraceSession-2020 How can I delete, disable the folders of these files. I have gone in to the final files and deleted them, at least I think I have, but the early folders are still there and the Application Logs appear again. How do I get rid of or disable these folders? Thanks!
1538 views
Jul 20, 2020 at 01:40 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1538 views
Oct 27, 2020 at 09:03 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1537 views
Mar 28, 2020 at 01:49 PM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1536 views
Dec 25, 2019 at 07:43 AM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1536 views
May 12, 2020 at 08:28 AM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1536 views
Nov 19, 2020 at 11:45 AM

Luminosity disappeared

Hello, i have problem, after install bootsped 11, i can't control luminosity because disappeared in central windows 10.
Best regards

1535 views
Sep 14, 2019 at 01:16 PM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1534 views
Sep 01, 2019 at 05:05 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1533 views
Apr 18, 2020 at 10:31 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1531 views
May 06, 2020 at 05:50 AM

ONEdrive freezing PC

How to improve onedrive velocity?
1528 views
Nov 15, 2020 at 04:59 PM