1850 questions

Boost speed does not recognise pro

I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
1232 views
Jan 21, 2022 at 10:59 AM

auslogics boostspeed 12

купил версию про, получил ключ почему не активируется про версия
1024 views
Jan 21, 2022 at 10:50 AM

blocked

I now get a this app has been blocked for your protection

using my shortcut for disk defragmenter pro
813 views
Jan 21, 2022 at 05:40 AM

Product will not activate

I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -

Content hidden to protect privacy

777 views
Jan 20, 2022 at 10:39 PM

administrator blocked auslogics

I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.



Kind Regards,

Michael Figueroa
1368 views
Jan 19, 2022 at 10:17 PM

Integrator.Exe wird von Windows geblockt

Hallo,

"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.

Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).

Wie bekomme ich mein Boostspeed wieder voll registriert?

MfG,
P. Kaatz
930 views
Jan 19, 2022 at 11:58 AM

Windows Update, something went wrong

My sytem is no longer doing its windows updates, it always displays an error saying " something went wrong Try to reopen settings later"
750 views
Jan 18, 2022 at 11:44 PM

ホルダーが「空」になる

boostSpeed12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、(D)に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
827 views
Jan 16, 2022 at 04:19 AM

Analyse pour ajustements Windows

Bonjour,
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.

Pourriez vous m'aider,

Cordialement
Hendrik Zutterman
747 views
Jan 15, 2022 at 02:21 PM

right mouse click

i have big problem when i click with right mouse button it loads forever. i cleaned registry already few times but it didnt help. and i am helples dont want to reinstal whole system ...
763 views
Jan 14, 2022 at 09:47 PM

Windows 11

I've upgraded to Windows 11. Are there any issues using BoostSpeed with Win11 that I should be aware of?

Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
846 views
Jan 14, 2022 at 08:13 PM

Browswer history

Before I installed Boostspeed, I used to be able to start typing a website into my browser and it would recognize what I was doing and fill in the rest for me. Super convenient for sites that I use all the time like banks. Now that doesn't work anymore and I really miss it. How do I get it back? Thanks!
696 views
Jan 13, 2022 at 10:20 PM

pop up for ugrade when I already subscribe to boost 12

I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
839 views
Jan 13, 2022 at 03:15 PM

Old Windows Versions

When I do a Scan and Resolve, the scan always turns up the Windows "Tweak" of removing "Old Windows Versions." However, this appears to never get done, becaause I get the same option every time I run a Scan.

Why isn't it removing "Old Windows Versions?"
1209 views
Jan 13, 2022 at 12:04 AM

Updates to file finder and boost speed

Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!

Mary Jane West

Content hidden to protect privacy

1048 views
Jan 12, 2022 at 07:22 PM

driver power state failure

Здравствуйте!

Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.

Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.

Ноутбук куплен прошлой весной.

Скажите, пожалуйста, существуют ли способы решения этой проблемы?

С уважением, Иван.
824 views
Jan 12, 2022 at 05:41 PM

Gpu

I just downloaded the Auslogics and opened it, then i hit scan after the scan i applied all tweaks and reboot my computer after the reboot my computer works fine but the screen does not come its just pitch black how do i fix ? [İ am using hdmi to connect my gpu to monitor]
955 views
Jan 11, 2022 at 08:05 PM

Неверная функция

Система WINDOWS 10. пишет неверная функция на C/Program фото 1641922315365 прилагаю. ПОМОГИТЕ исправить или удалить неверную функцию. Что лучше сделать ?
1091 views
Jan 11, 2022 at 05:36 PM

Відсутнє налаштування

Зникло налаштування "Яскравість" в Центрі підтримки портативних ПК...
658 views
Jan 11, 2022 at 11:43 AM

Making best use of the high system resource usage detected warning

Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
814 views
Jan 10, 2022 at 03:20 PM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1427 views
Jul 07, 2020 at 04:16 AM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1426 views
Dec 25, 2019 at 07:43 AM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1423 views
May 12, 2020 at 08:28 AM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1422 views
May 23, 2020 at 09:39 AM

аааа

медленный

1421 views
Jun 28, 2020 at 10:18 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1421 views
Mar 25, 2021 at 01:02 PM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1420 views
May 06, 2020 at 05:50 AM

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1419 views
May 06, 2020 at 04:31 PM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1416 views
Aug 17, 2020 at 09:27 AM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1416 views
Nov 19, 2020 at 11:45 AM

My wireless driver is not working

This is the second time this has happened and it has something to do with this softwarre Auslogics 11 after a deep scan took place. But now I cant restore the driver because it seems to be blocked,
The diagnostic's say "Windows can not bind the IP protocol stack to the network."
This is with my wireless adapter and not with my LAN, But I need my wireless adapter asap. Yes I have tried reinstalling the driver and it says the same thing,

1415 views
Apr 15, 2020 at 03:02 PM

モニター画面が操作中に何回も、すぐ真っ暗になります。

本日より、スクリーンセーバーのセッティングと違う動きで画面が1分位で真っ暗になります。マウスを動かしたり、エンターキーを押すと元の画面に戻ります。
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。

因みに、電源操作も全て解除し、なしの状態にしております。

以上宜しくお願いします。

佐藤光則  hsny7743@uranus.dti.ne.jp
1414 views
Jun 24, 2021 at 07:08 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1412 views
Mar 28, 2020 at 01:49 PM

Auslogics Driver Updater 1.23.0.2

Уже не первый раз встроенный антивирус Windows 10 "ругается" на программу, после чего удаляет DriverUpdaterHelper.dll, выдаёт код ошибки 0х0000007Е, и просит переустановить программу. А сейчас при попытке загрузки сетапа с вашего сайте пишет, что она содержит вредоносную программу. Пожалуйста, подскажите, как мне решить данную проблему, чтобы на будущее я с ней не сталкивался? Форма техподдержки непосредственно по вашим программам не работает ни через Мозиллу, ни через Хром, сообщения не отправляются, поэтому пишу здесь. Пожалуйста, сбросьте мой счётчик бесплатных вопросов.
1412 views
Apr 02, 2020 at 01:36 PM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1412 views
Jan 03, 2021 at 09:19 PM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1411 views
Sep 01, 2019 at 05:05 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1411 views
Apr 18, 2020 at 10:31 AM

Taboptimizer is causing a 32 bit program to crash

How do I disable Taboptimizer in BoostSpeed 11. I have verified that is is a program in the BoostSpeed directory on the Windows 10 computer. If I do not run BoostSpeed, then I do not have the problem. I can send crash logs if that helps. I would rather just disable Taboptimizer or not use it.

1410 views
Sep 10, 2019 at 08:56 PM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1410 views
Nov 24, 2020 at 02:38 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1409 views
Oct 27, 2020 at 09:03 AM