1897 questions
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
Thank You
James Elder
MSEdge
Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
boostspeed
Pc still not operating smooth see no changes since using boost speed after two or three scans. maybe problem is windows or age of PC or Spectrum cable.
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
re windows 10 not updating from 1909 to 22H2.
Follow up on not being able to update to Windows 10 22H2 from 1909.
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
Windows Update
This error code might help: (0x80004002).
Can you guys help? Tried everything. I can't seem to fix this.
Can you guys help? Tried everything. I can't seem to fix this.
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
Accessing NAS from the web
¿How do I access my Buffalo Link Station LS220DB from the web in a secure way?
installation logiciel
Bonjour, je n'arrive pas à installer un Logiciel , j'ai une erreur 1720 de windows installer
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Cursor locks up and I can't type
Sometimes my computer freezes and I have to wait awhile to type again. Is there a solution for this? This happens in Internet browsers and Microsoft Word.
Privacy Leaks
Boost Speed 13* has been sending me the message that I have "Potential privacy leaks detected - . . . . some Windows settings are enabled to share your private information"
How do I find the Windows settings and disable them?????
How do I find the Windows settings and disable them?????
Неизвестная музыка в наушниках
Когда сижу в наушниках в одном ухе тихо играет музыка. Пробовал закрывать все приложения, смотреть в микшере громкости - проблему не нашел. Прибавление звука системы звук музыки не прибавляет. Музыка явно не из моего плейлиста. Наушники подключены по проводу. Что это может быть и как это можно исправить?
Vos logiciels
Quel utilité et quelle différence (avant de passer ma commande) entre Auslogics BoostSpeed13 et Discdefrag?
Je ne sais que choisir vraiment..
Je ne sais que choisir vraiment..
Computer shutting off
My computer has been randomly shutting off. I sent it to IT at school and they put a new battery and motherboard in but that hasn't fixed it, it rarley happens when I am at home, mostly when I am at school. How do I fix it?
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Laptop freezes on and off
Lenovo laptop freezes on and off. I have few apps open at the same time and I wfh these days. so I logged onto VDI to connect to my workspace. Can you remote login and help.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7