1859 questions
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
sobre boost speed 13
Descargué la versión gratuita de boost speed 13, el problema es que cuando hize que analizará mi pc había una parte que ponía "desfragmentación de disco" lo cual es malo porque mi pc lleva ssd y desfragmentar es malo para los ssd, desinstalé el programa porque después que analizará mi pc y solucionará los problemas encontrados no vi diferencia de rendimiento.
Auslogics BoostSpeed13
Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?
Thanks in advance - Scott
Thanks in advance - Scott
исчез диск
при помощи вашей программы я запустил сканирование компьютера. После окончания сканирования ваша программа предложила исправить "недостатки" системы. После этого у меня исчез внутренний диск D со всей инфомацией. Как такое может быть? И что мне сделать чтобы всё восстановить обратно. Спасибо.
Problem mit dem Optimieren in Disk Defrag 11
Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.
Ich benutze Windows 10, 64 bit.
мешает
c:\users\ольга\appdata\local\microsoft\windowc\setingback up\20240120.215638\lo MidHost.exe постоянно выскакивает, как от этой программы избавиться
Pc Speed is slow compared to other devices
Hi
Recently I have noticed that my PC internet speed has drastically gone down. Every other device in the house has speeds of around 65mb upload speed. Yet my PC is around 6mb
I have tried disconecting ethernet cable and just connecting to the wifi but thats just as slow. I have also tried doing a network reset and that did not work. Every interent page used to be instant and now it really lags. I cannot do any online work until this is fixed.
Can you give me a list of things to try I am using windows 10
Recently I have noticed that my PC internet speed has drastically gone down. Every other device in the house has speeds of around 65mb upload speed. Yet my PC is around 6mb
I have tried disconecting ethernet cable and just connecting to the wifi but thats just as slow. I have also tried doing a network reset and that did not work. Every interent page used to be instant and now it really lags. I cannot do any online work until this is fixed.
Can you give me a list of things to try I am using windows 10
Cubase and low DSP, ISR latency
Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
taskbar\system errors\explorer.exe\overrun in slack based buffer
Since my first question my problem is getting worse. Now I'm unable to open the control panel the shortcut on my desktop disappeared as I tried to open it. Troubleshooter samething. I cant get a lot of things to open anymore. Cant contact Dell, Microsoft, boost speed 13 still works, but for how long? Please help me before I chuck this thing in the garbage
Sprache deutsch
Gibt es das Handbuch auch in Deutsch?
Wie kann ich die bezahlte version von Auslogics BoostSpeed 13 auf meinen Computer downloaden?
Wie kann ich die bezahlte version von Auslogics BoostSpeed 13 auf meinen Computer downloaden?
indicacion del tiempo de inicio de windows
Estimado Señor:
Me dirijo a usted para preguntarle cómo logro que aparezca la notificacion en pantalla, del tiempo que ha tardado windows 11 en iniciarse.
Gracias, Atentamente:
Francisco José Díaz Álamo
Me dirijo a usted para preguntarle cómo logro que aparezca la notificacion en pantalla, del tiempo que ha tardado windows 11 en iniciarse.
Gracias, Atentamente:
Francisco José Díaz Álamo
WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install
WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install
Windows Performance
Is there a program or anything that will scan my laptop and honestly improve the speed and performance?
remarque
je ne sais pas si la question est déjà posée ou non, mais voilà ma question.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Task Manager & Auslogics Registry Cleaner
Task Manager on my Win 11 PC is showing CPU 29% busy (idling) whilst Auslogics view is showing 17%. Can you explain the difference?
Gostaria de ter
Bom dia!
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
user-defined mode
I apologize if my translation program, even if it is one of the best, makes mistakes.
I would like to speed up my PC. There is no real profile in Auslogistics BoostSpeed 13. I have to exclude the use for games from the outset. None are installed. At least not consciously. In addition to normal office programs from Office 365, I often use the Internet for research purposes and have the complete Adobe package from CreativeCloud. I have now noticed very often that my PC freezes or that memory capacities are probably fully utilized. But I can't see any evidence or the cause anywhere. I copy the PC data here at the end. I would very much like to be able to work according to my configuration again. The Windows energy-saving mode is set to off.
Gerätename DidisTurbo
Prozessor 12th Gen Intel(R) Core(TM) i7-12700KF 3.60 GHz
Installierter RAM 32,0 GB (31,8 GB verwendbar)
Geräte-ID C2B4ADDA-869D-40DF-B2CE-40F87E67FB5E
Produkt-ID 00330-80000-00000-AA179
Systemtyp 64-Bit-Betriebssystem, x64-basierter Prozessor
Stift- und Toucheingabe Unterstützung für Stifteingabe
Edition Windows 11 Pro
Version 23H2
Installiert am 02.01.2024
Betriebssystembuild 22635.3140
Leistung Windows Feature Experience Pack 1000.22686.1000.0
I would like to speed up my PC. There is no real profile in Auslogistics BoostSpeed 13. I have to exclude the use for games from the outset. None are installed. At least not consciously. In addition to normal office programs from Office 365, I often use the Internet for research purposes and have the complete Adobe package from CreativeCloud. I have now noticed very often that my PC freezes or that memory capacities are probably fully utilized. But I can't see any evidence or the cause anywhere. I copy the PC data here at the end. I would very much like to be able to work according to my configuration again. The Windows energy-saving mode is set to off.
Gerätename DidisTurbo
Prozessor 12th Gen Intel(R) Core(TM) i7-12700KF 3.60 GHz
Installierter RAM 32,0 GB (31,8 GB verwendbar)
Geräte-ID C2B4ADDA-869D-40DF-B2CE-40F87E67FB5E
Produkt-ID 00330-80000-00000-AA179
Systemtyp 64-Bit-Betriebssystem, x64-basierter Prozessor
Stift- und Toucheingabe Unterstützung für Stifteingabe
Edition Windows 11 Pro
Version 23H2
Installiert am 02.01.2024
Betriebssystembuild 22635.3140
Leistung Windows Feature Experience Pack 1000.22686.1000.0