Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
Fake scan
Проблема
Drivers
Here's a snapshot of the drivers.
Could someone tell why this is happening?
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please