32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
I've got a problem with switching to my dedicated graphics card. For some reason games like CS:GO tend to run on integrated graphics. I've tried everything such as going to Nvidia Contol Panel and choosing cs:go, and setting it on my Nvidia card. When I go to Graphics settings and choose CS:GO it says Intel(R) HD Graphics 3000 for Power Saving and High Performance (which it shouldn't be like this) . I've installed the latest version of my Nvidia Card ( which is 391.35). The only way I can use my Nvidia Graphics for CS:GO is that I have to disable Intel(R) HD Graphics 3000 in Device Manager (which then I'm limited to 60HZ and can't change color settings)
I'm using an Asus Laptop( Asus K53SV)
Here is some information about the hardware that I'm using:
Geforce GT 540M
Intel(R) HD Graphics 3000
I hope you guys can help me with this and have a good day :)
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
除外リストに「HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\*」を設定しましたが、効果がありません。
他に、Microsoft Print to PDFの保存に使用したフォルダがスキャンするとドキュメントフォルダに初期化されてしまいます。これも除外リストに
「HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\*」を指定したのですが、効果がありません。
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
plz help.. i had also bought/registered em auslogics driver installer but it kept on crashing and last hour an error came up saying some f***in file was missing and shit.I DIDNT EVEN TOUCH ANYTHIN. i hav avg anti antivirus (thot) and kaspersky tdss killerso yeaa i ran a deep scan and a root kit scan but alas no virus was found either. SO PLZZ HELPP my ames keeeeeep on crashing and stuff
whenever i open somethin well, it only stays 'opened' for like a min or half and then my whole system freezes. i had earlier enabled that whenever there gonna be critical error, bootspeed's gonna restart my system and stuff
SO THAT MEANS WELL IF MY SYSTEM KEEPS ON RESTARTING ON ITS OWN THEN IT EXPERIENCING SOME CRITICAL ERRORS
plz helpp i hv had enough of this shit plzzzz !
i cant even add a file cos my system keeps hangin so i cant even snap a screenshot
plzzz devs help plzz
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
As it says on the title - after using Auslogics Boost Speed to clean up my computer, my Japanese IME stopped working. The options to input using the various keyboards disappeared and reinstalling the language did nothing. Restarted my computer, tried fiddling around and it won't come back. I've attached a picture of how it should look normally and how it looks now. Any help with getting it back would be appreciated.
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?