У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
For the last week I am having issues opening any file or folder. It seems like it takes a minute or 2 for them to open. It is driving me nuts.
I have tried most of the items in https://windowsreport.com/file-explorer-slow-windows-10/ with no effect.
Anything you may provide would be appreciated!
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович
Recently I was having problems with Microsoft Store that it kept giving an error message when updating apps (can't remember which one eaxctly). So I reset it as per advice on various forums but since then Microsoft Store has disappeared from Apps and no longer works at all!
Please help / advise.
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Ian R. W
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Edited 7 days ago
Waiting for moderation
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Ian R. W
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Ian R. W