I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Flexibreaks holidya and travel club
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?
J'ai un problème de connexion tant sur ma messagerie mails (Orange) que sur certains sites qui nécessitent notamment une connexion via FRANCE CONNECT ou les banques
Je pense avoir fait un bon nettoyage par votre biais mais en même temps je ne sais pas exactement ce qu'il faudrait supprimer...
Est-ce que le fait d,avoir Google Chrome est mieux ?
Est-ce que j'ai Kaspersky et CCleaner et maintenant Auslogics, ça ne fait pas interférance
car c'est vraiment des interférances : pas toujours les mêmes blocages mais toujours en début de connexion (par ex, quand je veux changer de comptes de messagerie alors que les 3 sont sur Orange...)
merci et à bientôt !
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do
Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
Thank you so much for your support.
Alex Janssens (Iepenburger)
I have both the boostspeed 11.5 and the defrag ultimate
It seems like the integrated defrag in boostspeed 11.5 is the old version not the new ultimate
What would be the advantage of getting the ultimate version if it is not integrated - what does the integrated version NOT do that the ultimate version does?
It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!
MS Excel does not open on click, need to go to File Open. When received as an email attachment, MS Excel only opens a blank grey screen. Can only open after saving attachment then doing a File Open.
Tried the DDE thinh and your software said it had made the necessary changes to allow MSExcel files to be opened by clicking on them rather than using File Open
Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:
•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)
However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.
Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.