1919 questions
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
Windows 11 will not recognize and allow either of these two really nice, brand new, input devices to operate in the windows environment.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
Velocizzare apertura file cartelle e foto
Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Hello, I have an iPhone 14 pro and by accident, I remotely wiped the phone trough "find my app". My question for you is whether this software can recover the extremely valuable data from the phone or any other available software you suggest? The phone is password-locked as lost and hasn't been switched on since the wipe happened.
Looking forward to hearing from you.
Best wishes
Nikola
Looking forward to hearing from you.
Best wishes
Nikola
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
no se activa el icono en el administrador de dispositivos de window 10 para el bluetooth, por lo que no puedo emparejar ningun dispositivo de este tipo mediante bluetooth
Drivers
The same drivers keeps coming up in the dianostics:
Here's a snapshot of the drivers.
Could someone tell why this is happening?
Here's a snapshot of the drivers.
Could someone tell why this is happening?
Program language
First of all, I wish you a good day.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
Fake scan
When I log into a search engine ( Google or Bing) the home page comes up. If I search for anything like Gmail or anything else it says "connection is not possible". It appears that a virus is diverting the search. The security software is picking up that it is diverting to p.f.360.cn/pollmessage. I can delete the unauthorised enteries but cannot get rid of the virus so it keeps happening. Does your service get rid of this fakescan.?
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Defrag Ultimate
I have Boostspeed 12.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same. I tried a lot of fixese but they all don't work.
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
no responcive pc
after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
boot speed
Dear Sir,
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
key not working.
The following two keys of my Dell Inspiron laptop is not workin ;
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
Regestry
Can I use the registry to solve.......How can I turn off "Do you want to allow this app to make changed to your computer" popup for one specific app?
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
Restricted volume on a new hard drive
I installed a 3 TB hard dive on my desktop. I can only use 2TB with Wndows 10. How can use all of the new hard drive?
Fn клавиша на ноутбуке
Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
Desktop INI
How do I use Boost speed 12 to get rid of this issue where Notebook opens at start up with
[.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
[.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか?
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか?
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか?
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
Slow Word response
I am having problems with Windows Word and Excvel !
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
I keep getting a message ' not responding' - when loading both Word and Excel - then after about 30 seconds it loads ?!
I have tried all sorts of published ways to correct this problem.
Is their a simple way to stop this annoying problem.
Thank you in advance
Chris Morley
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you