No me funciona bien el Brillo, y tampoco me detecta los auriculares
mise a jour
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Auslogic 13 update problem
software Auslogics
New Problem Notifiction
何回cleanningをおこなってもデフラグや調整項目がある
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Accessing Permission to view photos
play game without lag
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
software updates
in the last few weeks I have purchased several of Auslogics software programs. Since I began using the software, 3 of the programs have been updated with an additional cost. When I originally subscribed to the software I did not expect to have to pay for updates
only after a yearly subscription and the a possible update of the price.Although I have found the software to be good, the prices are somewhat higher than other products on the market such as CCleaner, Malwarebytes and F Secure which I also use with fixed prices for a yearly subscripton withou additional costs for updates. I WILL NOT BE RENEWING THE SOFTWARE AFTER THE ALLOCATED PERIOD BECAUSE MY FEELING IS THAT THE TOTAL PACKAGE YOU PROVIDE IS NOT VALUE FOR THE COST INVOLVED.
PLEASE RESPOND TO MY COMMENTS AS ABOVE. I ALSO APPRECIATE THAT AUSLOGICS SOFTWARE ALLOWS INCREASED MANAGEMENT OF MY WINDOWS 10 PC , HOWEVER I AM NOT CONVINCED THE EXTRA COST IS WARRANTED.
REGARDS, D BOHEMIA
windowsupdateの更新履歴が消えた
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
An error occurred while loading Library.dll
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
Thanks
Nick
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Time Lag with using both mouse and keyboard; Slow Computer
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Ron
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
Why I am seriously upset
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
wondpws 10 don't boot
My windows 10 home can not boot after a registry cleanup. It was stopped at the laptop logo and not going thro. Later attenpt to boot shows bluescreen with "BAD SYSTEM CONFIG INFO".
I have tried BCD fix, but got "access denied". I tried rewrite config, but my Regback is empty with no backup reg files. Please advise how can I get the thro?
Thank you.
ESENT Help.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Driver power state failure
Driver power state failure , this is not getting ressolved even after updating all drivers of the system. Tried various methods listed on the internet, changed settings many times. Even Auslogic couldn't solve it.
Drivers
Your driver updater for Wifi 6 AX200 from the driver updater program, cause HUGE throughput issues....
Tests went from 40mbit to 900+mbit (maxing out my connection) when connected to wifi AX.
Thanks
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
I could not update the Drvers
I have problems on Diver Updater: I could not update my old drivers with the update drivers from you, When I do the mouse pad is not working any more. I have to restore the system. I need your help to update the Drivers.
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb