1777 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
IMEがスキャン後停止する。
Windows10のinsider Programに参加しています。 Boostspeed10を１年半ほど使っており、Win10 build188xxごろまでは問題がありませんでした。ところがそれ以降のビルドから、IMEが無効になるようになり、Windows のバグかと思っていました。
ところが、ふと思いついてBoostSpeedのスキャンで削除したファイルを戻すと、IMEが復活しました。 Windowsのアップデートの際にBoostspeedとバッティングするような変更があったのかもしれないと思っています。
今、Boostspeed１１を使っており、システムにかかわる項目を大幅に外して使っています。
いつも使うのは クリーンアップと保護です。
トラブルはIMEだけですので、IMEにかかわる項目だけ外してスキャンしたいとおもいます。
クリーアップ・保護の項目で外すべきものをお教えください。
bootspeed 5
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
Cannot activate
I HAVE PAID FOR on 1/20/22, AND DOWNLOADED BOOST SPEED 12.2.0.0. AND REGISTERED WITH THE SUPPLIED KEY.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
A little advice before running this feature
I am not having any windows 10 problems but am a little concerned about your optimization feature to remove outdated windows files. In my case there are 43.16 GB or 28,000 items indicated that could be cleared. The warning is that after this some files may have to be downloaded from Microsoft. Is this amount of files typical. My system has had Windows 7 on up so maybe this would help but there are so many of these files I dont want to crash my system. Any tips or advice on this would be appreciated
Mark
Mark
C922 Pro stream webcam
After initial total scan of my system the webcam is not working anymore.
Any idea ??
Any idea ??
Windows 10 Update Error Code 0x80070bc9
I haven't been able to update my Laptop running Windows 10 to the most recent update (sent in April 2021). I get an error Windows 10 Update Error Code 0x80070bc9 ... But I used the Windows Troubleshooter in Windows to try and fix it but was unsuccessful.
Do you have a tool to address this and repair Windows Update software or whatever is wrong?
Do you have a tool to address this and repair Windows Update software or whatever is wrong?
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
system windows 8?
How do I change what system it shows? I have always had windows 10 on this computer.
Pop-Up Product Sales Window
Hi-
I just recently purchased your Bootspeed system--which is great and full of great features that I typically have to buy many programs to do. I keep getting an ad pop-up to buy your other products and when I check off DON'T SHOW AGAIN, it just does that. It's annoying and a turn off..
Thanks,
Steven
acsses denied in changing windows services
hey!
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
Ошибка драйвера
Пожалуйста, подскажите к чему может привести следующая ошибка и можно ли её исправить. ОС Windows 10.
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Error Message
Greetings,
Please open "Screen Shot" of error.
Thank you for your help in this matter.
Long Time Auslogice Customer
V/r
J. Aguero
Updating to the newer software
Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.
after tweaking system using Auslogics, sound doesnt work. help pls
when i try to play an audio file, it shows up with this: 0x80040154
kindly help
thanks
kindly help
thanks
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7