1859 questions
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
Site Usage
I use WWW.BERNERS.HIBID.COM weekly but since getting BoostSpeed 12 it won't load. I am getting
THE CONNECTION FOR THIS SITE IS NOT SECURE
USES AN UNSUPPORTED PROTOCAL
ERR.SSL VERIN OR CIPHER.MISMATCH
MY WIFES PC WHICH DOES NOT HAVE bOOSsPEDD RUNS IF FINE
THE CONNECTION FOR THIS SITE IS NOT SECURE
USES AN UNSUPPORTED PROTOCAL
ERR.SSL VERIN OR CIPHER.MISMATCH
MY WIFES PC WHICH DOES NOT HAVE bOOSsPEDD RUNS IF FINE
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
integrator.exeの負荷が大きい
Auslogics BoostSpeedを最近アップデートして以来、integrator.exeのCPU負荷が30%になっていてファンが止まりません。このプロセスを止めたいのですがどうすればよいでしょうか？
mise a jour de fonctionalité vers windows 10 version 20H2 bloque a 61%
Bonjour,
Je veux desinstalle Conexant Smart Audio HD qui est supposé creer ce probleme.
Le désinstalleur de Boostspeed ne le troive pas.
POurriez vous me donner une suggestion?
Merci
Cordialement.
Je veux desinstalle Conexant Smart Audio HD qui est supposé creer ce probleme.
Le désinstalleur de Boostspeed ne le troive pas.
POurriez vous me donner une suggestion?
Merci
Cordialement.
Boot Speed, or Restart Speed
The main reason I bought this program was to help increase my boot speed. it's 4 minutes and 15 seconds. After running the Pro version of the program the boot speed is still the same. I deselected a bunch of items in the startup screen and it's still the same. I don't understand why it takes so long. Please help.I'm not sure if this is a windows question or a software question. thanks. Paul
eliminazione di windows obsolete
non riesco a pulire bene windows obsolete che di solito vengono eliminati comoletamente
Повышенное потребление ресурсов
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
Computer slowness one in internet
I have your free version of BoostSpeed 12 running on an old PC whose features are:
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
I want to remove the arrows on the deskyop icons
I want to remove the arrows on the deskyop icons, see the enclosed picture
Tony Bell
Tony Bell
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
ERROR CODE 80072EFE WHILE UPDATING
HELLO
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
Updating to the newer software
Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.
MSFS e Windows10 PRO
Hi, I own BS12 on two pCs. One PC I use only with gaming apps and the other and I use it exclusively for home, online and with the web. BS12 on pc where I don't play works great. BS12 that works on the pc where I play and in particular with Microsoft FlightSimulator, BS12 after thorough cleaning tends to get your PC blocked. I tried to exclude gaming apps but apparently windows is tightly connected. I had to reinstall windows 10 pro. In my opinion, it also depends on the Deep-Clean function and Empty Folders Cleanup. I can't use these two functions. On the pc where I play I am not satisfied! On the pc I use for all other functions is OK. Tips?
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7