Touchpad Stopped Working
Ausllogics BoostSpeed 13 so difficult to open
Disappointed !!!
Recovery points
How does one locate, to use if necessary?
laptop is shutting down 30 sec
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
ICカードリーダーが使えない
no moving
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
Jabra Speak 710
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
レスポンスが遅くなった
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
Recovering Deleted Files
Ok Its not Store but Log in Activity..
You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
Thank you far any insight.. Regards, Mitja
Recover Data if possible
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
EL PROGRAMA TIENE ALGUNA FUNCION PARA DEJAR WIN 11 COMO ESTABA POR DEFECTO
Неизвестная музыка в наушниках
help requested
enregistrement de la clé
Gigabit tuning
MSEdge
FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
An error occurred while loading Library.dll
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
Thanks
Nick
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Time Lag with using both mouse and keyboard; Slow Computer
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Ron
Why I am seriously upset
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
wondpws 10 don't boot
My windows 10 home can not boot after a registry cleanup. It was stopped at the laptop logo and not going thro. Later attenpt to boot shows bluescreen with "BAD SYSTEM CONFIG INFO".
I have tried BCD fix, but got "access denied". I tried rewrite config, but my Regback is empty with no backup reg files. Please advise how can I get the thro?
Thank you.
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
ESENT Help.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Driver power state failure
Driver power state failure , this is not getting ressolved even after updating all drivers of the system. Tried various methods listed on the internet, changed settings many times. Even Auslogic couldn't solve it.
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
Drivers
Your driver updater for Wifi 6 AX200 from the driver updater program, cause HUGE throughput issues....
Tests went from 40mbit to 900+mbit (maxing out my connection) when connected to wifi AX.
Thanks
I could not update the Drvers
I have problems on Diver Updater: I could not update my old drivers with the update drivers from you, When I do the mouse pad is not working any more. I have to restore the system. I need your help to update the Drivers.
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb