1826 questions
Touchpad Stopped Working
Can you give me possible solution methods to get my Lenovo Yoga laptop (Win 10) touchpad to start working again? I am currently using a bluetooth connected mouse with my laptop, but "out of the blue" my touchpad stopped operating. I've had this issue happen before and a re-boot corrected the issue, but not this time. Thanks.
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
laptop is shutting down 30 sec
Hello
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
ICカードリーダーが使えない
Smart Card Device Enumeration Serviceが「停止中…」と表示され、ICカードリーダー使用できない。ICカードリーダー自体はデバイスマネージャーで「CIR215 PICC」と表示され、「正常に動作しています」の状態です。コマンドラインからtaskkillで強制終了して再実行をしても、すぐに停止中でフリーズしてしまいます。
no moving
hi,
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
Jabra Speak 710
I have a Jabra Speak 710, connected through a Jabra Link 380 bluetooth device.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
レスポンスが遅くなった
動作がいちいち遅くなって困っています。何を調べればよろしいのか教えてください。
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
Recovering Deleted Files
How do I recover my delted One Drive files that were deleted when I upograded to Pro Vestion 13
Ok Its not Store but Log in Activity..
Ok ..so Ill just tell my problem: I started getting unsuccessful access tries constantly for mm a year ,it wassnt like that before, and i dont know from where or why.. my Mobile? But some are from Firefox and i dont have it anywhere anymore Have you seen something like this before? I have a picture ..screenshot
You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
Thank you far any insight.. Regards, Mitja
You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
Thank you far any insight.. Regards, Mitja
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
EL PROGRAMA TIENE ALGUNA FUNCION PARA DEJAR WIN 11 COMO ESTABA POR DEFECTO
TODAS LAS TAREAS PRIMARIAS Y SECUNDARIAS, ETC... HAY ALGUNA FORMA DE DEJARLO COMO VIENE WINDOWS 11 POR DEFECTO
Неизвестная музыка в наушниках
Когда сижу в наушниках в одном ухе тихо играет музыка. Пробовал закрывать все приложения, смотреть в микшере громкости - проблему не нашел. Прибавление звука системы звук музыки не прибавляет. Музыка явно не из моего плейлиста. Наушники подключены по проводу. Что это может быть и как это можно исправить?
help requested
What can i do if I get message : high system resource usage detected. My computer is extremly slow and only became so over last 3 months.
enregistrement de la clé
Bonjour, je n'arrive pas à enregistrer la clé, à chaque fois et tant de fois le logiciel me demande enregistrer la clé activer la version pro.
Gigabit tuning
What should the settings be for really high speed input. I have gigabit internet and your system is set for really slow internet.
MSEdge
Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
востоновление системы
добрый день, как ваша система моет навредить компьютеру или системе, она внесла изменения на пк отключила достуа к микрофону и камере, но я включил, я попытался сделать востоновления виндоус но очень долго востонавливаетет реестьр, я так и не дождался и перегрузил пк и теперю боюсь что ваша программа внесла изменения и придется переустоновливать виндоус, что делать, так вроде вск работает, как проверть, правильно ли работает щас система? спасибо
logiciel trop lent et pas trés maniable
Re bonjour Auslogics Team,
Ne me trouvez pas trop insistant mais j'essaie par tous les moyens d'utiliser votre nouvelle version ABSP 11.
Il est trop lent,il bloque ma machine en permanence alors qu'avec le 10.24 et avant cà fonctionnait super.
Faites quelque chose dans cette direction.J'ai essaié de rajouter un ficher langue LNG français mais cà ne marche pas
avec votre nouvelle version.Pensez qu'il n'y a pas que seulement l'anglais dans le monde [L'australie est une ancienne
colonie anglaise] mais tout de même.
Salutation.r.t.
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
Hi,
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
BNP detected fatal error
I am having blue screen issues. BNP detected fatal error occurs every time I restart but not on shutdown.
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
Question about conflict with avanced programs
Hi, i have installed in my notebook windows 10 home some avanced programs, my question is... if i install Auslogics Boostspeed 11, what configuration i need to make? I dont like to have problems with this avanced aplications
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
How do I fix?
FINDSTR: Cannot open c:\ProgramData\acer\updater2\updater2.xml
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
The system cannot find the path specified.
This pops up in a dos box along with multiple others like this. How do I get rid of them?
Location is turned off and GREYED OUT.
Everytime I install BoostSpeed 12, in Windows the Location services on Windows 11/10 are greyed out automatically in the Operating System due to the presence of this third-party software. Due to this glitch, I am not able to toggle the Location services on and off and also cannot change any settings related to it. I have tried every hack and registry fix that Microsoft tells me to do and still nothing...location is GREYED OUT
no default app
hello,my laptop has had an issue where the settings app does not open because it does not have an app associated with it. How can i fix this issue? It does not open at all.
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
Right click loads too long on files and apps
I recently updated my windows 8.1 to windows 10 and now my right click is loading too long when I right click on files and apps.
And I have tried every possible method and still can’t solve it.
And I have tried every possible method and still can’t solve it.
Cpu Usage
Something is not working correctly. There is a high cpu usage and I am unable to figure out why. There seems to be an invisible ammount of cpu I cannot see? There is only 1 user on the machine and the cpu usage is more than the users cpu usage how does that make sense and how can I fix and optimize the cpu usage?
Работа ключа ЭЦП (Электронная цифровая подпись)
Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).
Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!
no responcive pc
after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7