102 questions
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
despues de suspender, arranca con TEMP
Puse mi desktop en modo SUSPENDER. y ahora arranca con un perfil TEM, como soluciono??
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
My PC crawls after i installed
Hello,
I have using AusLogic Bootspeed for over 6 mths (was on v 12.1.2 and now downlaoded v13
ever since i stalled and used your software My PC runs very very slow. In fact i think your software has drastically
affected my pc. what can be done to make it super fast like it was before installing
I have using AusLogic Bootspeed for over 6 mths (was on v 12.1.2 and now downlaoded v13
ever since i stalled and used your software My PC runs very very slow. In fact i think your software has drastically
affected my pc. what can be done to make it super fast like it was before installing
setting
Whenever I want to set "Start automatically at Windows logon
this error appears. I am asking for effective advice.
Well thank you
M.S.
Это чтото не позволяет мне разделить диск
Я хотел разделить свой ссд на часть для виндоус и для игр, но я не могу потому что мне мешает только один файл. У него нет расположения и удалить я его тоже не могу
Ethernet works only after deleting Network Adapter followed by Restarting PC
Everytime I start my PC Ethenet is not detected. I have to uninstal Network Adapter and Restart my PC.Then only Ethernet comes to life.
Why do I have to do these manoeuvres. I also have Auslogics Driver Updater but it's not of any help. Let me know how I can get Ethernet immediately after starting my PC.
Thanks
Why do I have to do these manoeuvres. I also have Auslogics Driver Updater but it's not of any help. Let me know how I can get Ethernet immediately after starting my PC.
Thanks
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
windowsupdateの更新履歴が消えた
Boostspeed13のマイダッシュボードのシステムスキャンを実行した後、windowsupdateの今までの更新履歴が消えてしまいました。更新履歴が消えない設定を教えてください。
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Bootspeed 13 Pro | x64 version
Hello,
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
DirectPlay issue
Every since I installed Auslogics driver updater I keep getting a message that I need to install directplay. Directplay won't install on my computer and if I choose to skip the installation the attached notification constantly comes up. Is Auslogics driver updater or Bootspeed calling for this outdated windows feature. If I uninstall driver updater I don't get that notification.
nettoyage Registre + defragmentation
Bonjour,
J'ai lu qu'il ne fallait pas trop nettoyer le registre, on risque de perdre des données essentielles. J'ai lu également qu'il ne fallait pas dégragmenter le disque trop souvent, est-ce vrai ?
J'ai lu qu'il ne fallait pas trop nettoyer le registre, on risque de perdre des données essentielles. J'ai lu également qu'il ne fallait pas dégragmenter le disque trop souvent, est-ce vrai ?
Microsoft EDGE
I'm becoming more than agittated with the over aggesive nature of this program trying to delete my browser and inserting itself on my system. Is there away of gettin this stiopped, have sent a number of e-mails to microsoft, windows insider and others. Any guidence you can supply will be greatly welcomed.
Tom Lalonde sargontomnetscape.net
Tom Lalonde sargontomnetscape.net
Set up your Computer
Each time I log in to Win 11 I am asked if I want to set up my computer.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
удаление профиля печати принтера HP
Здравствуйте
программа - отличная, спасибо.
Единственное, что хотел отметить - после сканирования уничтожаются настроенные профили печати на принтере НР (или последние использованные параметры). Перед печатью пять их делать приходится
С уважением
Дмитрий
программа - отличная, спасибо.
Единственное, что хотел отметить - после сканирования уничтожаются настроенные профили печати на принтере НР (или последние использованные параметры). Перед печатью пять их делать приходится
С уважением
Дмитрий
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Fehlermeldung beim Start von Auslogics Disk Defrag Ultimate
Hallo,
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
Вопрос об ошибке при внезапном отключении
Доброго времени суток, уважаемые специалисты!
Спасибо за возможность задать Вам вопрос.
В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.
Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?
С уважением, Ана
Спасибо за возможность задать Вам вопрос.
В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.
Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?
С уважением, Ана
Fix Broken Shortcuts
How does one fix/repair broken shortcuts. Auslogics gets hung up when using the Stability function.
Navigateur par défaut
J'utilise le Navigateur Brave. Comment en faire mon navigateur par défaut au lieu de Edge dans votre logiciel
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Cドライブの件
お世話になります。
私の使用している機種は、デル製 Insupiron 5490 AIO、デバイス名 DELL2021、プロセッサ Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz 2.11 GHz、実装RAM:8GB、Windous 10 Homeの21H です。
旧機種からの移行時、アプリを多くコピーしたため、Cドライブの空きが少なくなり、自分なりに不要なアプリをアンインストール、大きなデータをDドライブに移しました。しかしながら、容量221GBに対し、空きが14GBと少なくなりました。どのような作業業をすれば、空き容量を多くできるのでしょうか?
私の使用している機種は、デル製 Insupiron 5490 AIO、デバイス名 DELL2021、プロセッサ Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz 2.11 GHz、実装RAM:8GB、Windous 10 Homeの21H です。
旧機種からの移行時、アプリを多くコピーしたため、Cドライブの空きが少なくなり、自分なりに不要なアプリをアンインストール、大きなデータをDドライブに移しました。しかしながら、容量221GBに対し、空きが14GBと少なくなりました。どのような作業業をすれば、空き容量を多くできるのでしょうか?
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
Browsers run slooooow with WIN 11
Ever since I installed WIN11 the broswers (I've tried both Edge and Chrome) run at glacial speed, taking a second or two to respond to a mouse click. Sometimes a scan with Boost Speed seems to fix the problem sometimes now. Sometimes it disappears after a period of time, only to reappear after the computer has been asleep. I've tried all the fixes I've found online (remove extensions, etc.) and like the Boost Speed scan, the fix is only temporary if it works at all. Any advice?
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
"Location servises managed by your organization"
I need to fix this. Want to be able locate my laptop in case it gets loss
Bootspeed 13 Pro | x64 version
Hello,
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
This is not a issue, it is a technical question about Bootspeed version availability.
I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?
Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?
Thank you.
Best regards
Jorge Ambrosio
PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
Explorer
When searching for files and folders, two panels are convenient, but there is no such mode in Explorer. Why?