Device-related issues

The System Information report for my external backup hard drive above shows the following;

ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail

What does this mean and how do I fix it?

I just downloaded the Auslogics and opened it, then i hit scan after the scan i applied all tweaks and reboot my computer after the reboot my computer works fine but the screen does not come its just pitch black how do i fix ? [İ am using hdmi to connect my gpu to monitor]

How do I go about fixing the right click in windows 10 using your basic program?

With hte update of Windows t0 the sound on my computer fades in and out. I have used the troubleshooter; however, it is of no help at all.

I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,

I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.

Caps lock key not working or lighting up aslo volume keys are a bit touch and go as to if they going to work. Any help or on getting these working would be much appreciated.

I want to change the partitions on an SSD that i use for instant backup. I was hoping Boostspeed had this functionality.

If it exists, please point me to it.

Thanks

Ed

I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate

Confused.

Simon F

...при установке второй системы (windows7), при уже существующей (windows10), на отдельный диск, после загрузки BIOS, мышь и клавиатура перестаёт работать. Что бы Вы посоветовали?

Hi

Cool software and company. Thanks for your time.

Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.

Thanks again.

どうもPCのSSDをHDDと認識しているようで、スキャンすると毎回デフラグしてしまっている。これではSSDの寿命を縮めるのではないかと心配である。ちゃんとSSDと認識させるためにはどのようにすればよいのでしょうか？

At first I want sincerely поблагодаритьВас for the remarkable Auslogics BoostSpeed 12 program. The computer has significantly increased performance both in working applications and in games. You're just masters of your business. So I decided to address you with my problem.
Periodic loss of sound for 1 second in the processor power supply mode "balanced," "high performance." In the "energy saving" mode, this is not! Is it possible to solve this problem? The drivers are fresh, so is Windows.
Respect, Yuri.

Is it safe to defrag a ssd drive or should optimize only be used

Bonjour,
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv

Добрый день!

Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?

После исправления ошибок перестали работать порты на ноутбуке.... написало типа много используется устроств

Добрый день, такая проблема:
HDD WD Purple 6 TB, во время работы видет себя тихо, даже если на него что-то скидываю или с него воспроивожу (ну или вообще, хоть что-то делается на компе, абсолютно все что угодно = треска нет)

Если комп стоит несколько минут без дела, то HDD начинает трещать
Стоит мне хотя бы мышку сдвинуть, треск исчезает

Как это устронить?

non riesco a pulire bene windows obsolete che di solito vengono eliminati comoletamente

Hi! Everytime that I run Auslogics, that scans my computer for errors, cleans websites, etc.), my printer stops connecting properly with my computer. It appears that it affects the drivers. I have to clean out the printer, reinstall, etc., that takes a great deal of time. Your program speeds up my computer, which is great. But this repeated problem with my printer is a serious issue. Is there anything that I can do to stop this problem. You might need more information to solve the issue. I am happy to provide it.