410 questions
Boost speed does not recognise pro
I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
Colin Summerfield
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
administrator blocked auslogics
I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.
Kind Regards,
Michael Figueroa
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
Hallo,
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
ｂｏｏｓｔＳｐｅｅｄ12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、（Ｄ）に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Content hidden to protect privacy
Making best use of the high system resource usage detected warning
Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
versione Pro
Buonasera volevo chiedere se avevo acquistato versione registrata normale o Versione Pro perche nonostante il seriale che mi e' stato inviato
Content hidden to protect privacy
........ non si attiva la versione Pro Poi ho notato all'inizio un notevole consumo di risorse CPU.......poi molto dopo si e' Abbassata anche il 70%
ваш деинсталятор не удаляет эту программу
у меня ауслоджик про, платная версия. ваш деинсталятор не удаляет bluestacs.
BoostSpeed 13 BUG Issue
There is an aggravating "BUG" in BoostSpeed 13. A message frequently appears that states I have many TERABYTES of files in my Recycle Bin. See the attached screenshot.
I got this message today, while having less than 25 MB of files in my Recycle Bin.
Please look into this and fix this BUG.
Thank you.
Myron Achtman
Content hidden to protect privacy
Defrag and optomize problems
I have problems with defrag and optomize - it takes hours to complete the process. My previous version did not have that problem. It is so bad that i use windows defrag instead of Your defrag --- any ideas as to why???
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
python .dll error
i am encounteredwith the attached python.dll error, kindly let me know the solution.
i am using windows 7 , 64 bit.
i am using windows 7 , 64 bit.
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Shreddern und Löschen
In dem Tool "File shredder" wird sowohl geshreddert als auch gelöscht.
Worin besteht der Unterschied?
Worin besteht der Unterschied?
Auslogics 12
переустановил виндоус ..поставил программу Auslogics 12 а ключь не могу поставить.... Помогите...
Unintalled software packahe
I only use mu PC for flight simulation practive. Iecently uninstalled a program called Traffic Global. IT contined over twelve thousand files. Every time I run the Duplicate Filesprogram, the files continue to show up although I removed Traffiv Global weeks ago. Can you advise? Thanks!
Jack Sullivan
Jack Sullivan
activation Boostspeed
Hello,
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
rendre les textes plus lisibles
Comment augmenter la grosseur des caractères, pour les rendre plus lisibles.
Pro Version aktivieren.
Your Auslogics license information, order #
Content hidden to protect privacy
Ich nutze AusLogics Boost Speed schon sehr lange - mit obigem licence key lässt sie sich nicht aktivieren.
Was ist das los - auch löschen und Neuinstallation hat nichts gebracht.
Mfg
Decker Gustav
Programa não esta fazendo scan
Quando eu peço para fazer varredura o programa interrompe e apresenta o seguinte log
auslogics driver updater causes WINDOWS 10 to be disabled
I have the Auslogics Driver updater and used it on my ACER laptop , which is only 3 years old.
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7