1897 questions

PC slows down after a period of being on, following re-boot.

This has happened a while (over a year): I leave my PC on 24/7 to get updates, etc.

After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.

I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.

Have you run into this anomoly before and/or do you have a fix for this?

Many thanks!
777 views
Jun 30, 2022 at 06:08 PM

RUNDLL32

What catogory do I run to resolve RUNDll32 not working?
585 views
Nov 12, 2022 at 04:34 PM

wakeup problems

I dont turn off laptop at night. I run it with lid closed when in use.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
536 views
Oct 24, 2023 at 08:38 PM

Pc Speed is slow compared to other devices

Hi

Recently I have noticed that my PC internet speed has drastically gone down. Every other device in the house has speeds of around 65mb upload speed. Yet my PC is around 6mb

I have tried disconecting ethernet cable and just connecting to the wifi but thats just as slow. I have also tried doing a network reset and that did not work. Every interent page used to be instant and now it really lags. I cannot do any online work until this is fixed.
Can you give me a list of things to try I am using windows 10
444 views
Feb 02, 2024 at 09:33 PM

Not Receiving Emails

I am no longer able to receive emails but can send them, I have heard that there could be corruption in the system, can you help with this issue?
I have tried by re-installig the software,but I find all the settings arestill there, whereas I used to have ti restore backups.

Roger Hilton
5023 views
Sep 03, 2019 at 11:18 PM

Teredo

Нужно помощь для того чтоюы включить тередо не могу играть онлайн в игры из microsoft store

1352 views
Apr 06, 2020 at 04:35 PM

Error mesage

I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.

1230 views
Oct 04, 2020 at 05:57 PM

Unwanted sound

A day ago my windows 8.1 laptop started to say a word that sounds like Paul. I was listening to news and it appeared as if scheduled every10 seconds. Now even with no user task running I still hear the word. Any ideas?
1276 views
Dec 19, 2020 at 09:22 PM

BootSpeed 12

How can I move "BootSpeed 12" to clean up my wifes computer?

1582 views
Feb 25, 2021 at 08:15 PM

Is there some way to uninstall or disable some Windows "Features?"

For a number of reasons, I use Firefox as my default browser on this and other devices with Chrome as a secondary browser for some specific compatibility needs, but Windows is trying to force me to use their irritatingly disfunctional "Edge" browser. So far, I've had some success in decreasing the frequency at which WIndows pesters me to use the Ede browser, but I have not been able to completely eliminate this often intrusive problem. Is there some way to safely uninstall or completely disable the Edge browser?

Near the right end of the task bar at the bottom of my screen, Windows has an irritating "feature" that displays weather information and frequently presents a pop-up with news items and similar information. Id there some way to eliminate or uninstall this "feature?"
971 views
Jun 06, 2021 at 03:34 AM

Windows 10 Default System font changed


Hi,

After running all the Auslogics BoostSpeed 12 suggestions, the default system font changed into a horrible blurry type of text. This is across the whole system, including File Explorer, Chrome, Microsoft 365 Office apps (Excel, Word, etc), basically everywhere!

I've attached a screenshot from Chrome to illustrate what the default font looks like now.

How do I restore the original default system font?

Thanks and regards
Andrew

809 views
Oct 12, 2021 at 01:09 PM

driver power state failure

Здравствуйте!

Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.

Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.

Ноутбук куплен прошлой весной.

Скажите, пожалуйста, существуют ли способы решения этой проблемы?

С уважением, Иван.
909 views
Jan 12, 2022 at 05:41 PM

Hard drive not showing up on optimize screen

When using windows explorer, a specific hard drive is not showing up when I check the optimize box. I can scan and repair it but not optimize it. I used the free degrament tool by auslogics but even after auslogics deframented it, it is not showing up.
Should I be concerned about this? What does this mean?
thank you for your response(s).
765 views
Jul 04, 2022 at 12:34 AM

auslogics boostspeed

i hava auslogics boostspeed 12 and i paied for the new version 13. i didn't get he new version. can you send me a link to download the ne version.
787 views
Feb 01, 2023 at 05:48 PM

Cubase and low DSP, ISR latency

Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.

In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.

Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.

Thank you in advance
Kind Regards,
Miroslav
454 views
Feb 04, 2024 at 04:54 PM

Unable to to Receive Emails on Laptop and Desktop, etc

Since changing my password wuth my ISP and on Thunderbird, I am unable to receive emails on my Desktop, and now for some reason, I can n longer send them either. I also have problems with laptop, I can send but not receive emails.


Error message on Desktop: "An error occurred while sending mail, the mail server responded: SMTP.auth. Not alowed on Port 25"

For replies use:

Content hidden to protect privacy



Roger Hilton

1206 views
Sep 06, 2019 at 12:23 AM

Does not open on click, File Open required.

MS Excel does not open on click, need to go to File Open. When received as an email attachment, MS Excel only opens a blank grey screen. Can only open after saving attachment then doing a File Open.
Tried the DDE thinh and your software said it had made the necessary changes to allow MSExcel files to be opened by clicking on them rather than using File Open

1492 views
Apr 07, 2020 at 04:37 PM

WordPad problem

Have tried (for years) to learn WORDPAD to start-up in landscape and not portrait. That goes for saving 'in Landscape' and seeing it change to Portrait when opening the member. (HRMPF)

Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.

Regards
Henning Reckey
1398 views
Jul 02, 2020 at 03:06 PM

I applied Tweaks and now I have no sound

Is there a way to revert applied/recommended tweaks? After applying tweaks through the application, I no longer have sound and I get an error when I try to play video files
1178 views
Oct 04, 2020 at 11:09 PM