Windows-related issues

Dear Sir/Madame,

I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909

Hope You can help
Kamil Adamski

Besides the startup manager, how can I boot up faster?

Hi there,

In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.

I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:

Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display

Edition Windows 10 Home
Version 21H1
Installed on ‎11/‎27/‎2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0


Thank you very much,


Lance Losey

problems doing updates

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?

Переодически выдает ошибку, я так понимаю это связанно с каким-то файлом отвечающим за обновление Майкрософт Офиса. Появляется не так, чтобы часто. Может 1 раз при перезапуске компьютера. Как это можно было бы убрать? Переустановить офис, наверное...

Появляется табличка "Обнаружено высокое потребление ресурсов". Что делать?

How can I optimize Windows for GTA V for maximum performance?

I have your free version of BoostSpeed 12 running on an old PC whose features are:
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.

How bring Motherboard up to date when it is 11 years old and running windows 10 ok I don't have aTPM 2.0 conection avalable or anything else that will make it happen?

This morning I could play videos from the internet and tonight I'm not able to. Please give me suggestions to fix this.

The error message says:

(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss


Lori

Computor will not up date because it keeps saying something missing (0x8024a105) thats what is missing what is it?

Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.

Tried to purchase Boostspeed Pro but website would not advance to chaeckout?

I have lost my icons on the desktop!

The main reason I bought this program was to help increase my boot speed. it's 4 minutes and 15 seconds. After running the Pro version of the program the boot speed is still the same. I deselected a bunch of items in the startup screen and it's still the same. I don't understand why it takes so long. Please help.I'm not sure if this is a windows question or a software question. thanks. Paul

how to change selective startup to normal in msconfig?

I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!

Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?

Thanks for your help.
Darian

件名通りの状態です。

I am having blue screen issues. BNP detected fatal error occurs every time I restart but not on shutdown.
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow

For one month, impossible make à backup with Acronis. A bad block is the cause of that misfunction. I use CHKDSK with no stable résult. What can i do ?