943 questions
how to fix stop code kernel data inpage error
My computer have this problem very often can you help me, please. Thank you so much
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
despues de suspender, arranca con TEMP
Puse mi desktop en modo SUSPENDER. y ahora arranca con un perfil TEM, como soluciono??
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
Annoying Windows Pop Up Notification
A few months ago, it started to show up an annoying Windows pop up message stating that my laptop (Lenovo, Windows 10) needs DirectPlay feature. I don't even know what is DirectPlay neither what is used for. The message displays two options: install or skip installation of DirectPlay. No matter what I choose it keeps showing up every time I turn on my laptop.
my question is: how can I get rid of this annoying pop up Windows notification?
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
I have on disk C: With 166 GB, the Windows 11 operating system and I just want the drive C: for Windows. In recent days it has been full and does not allow me to manage the available space, as it has free only 1.6 GB and honestly I do not know how to reduce files in C: which I find too risky because I can collapse the system. What was at risk of happening today. I ask: can you help me? Thanks
Manuel Araújo
Manuel Araújo
fichiers très très longs (240-250 caractères)
Solution pour les supprimer ils sont souvent dans USERS et/où windows 11
Moving the $HOME$ Folder to amother drive
1. I regularily reinstall my system and need to move the system directories to another location.
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
file explorer
since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
I tried to reset using a previous reset point but that did not work
Right mouse click or Double click slow respond
when I Right mouse click or Double click on a file it takes almost 90 second to 2 minutes to respond in window explorer
will this make my pc as fast as it was when i powered it up for the 1st time?
will this make my pc as fast as it was when i powered it up for the 1st time? - will boost speed 12 pro resolve this issue?
when i turn my pc on it takes like 30 sec to get to the windows screen where it use to take less than 3 seconds - will boost speed 12 pro resolve this issue?
my pc seems to lag and slow down while having multiple programs open and running at the same time where when it use to not do this. - will boost speed 12 pro resolve this issue?
internet speed seems extreamly lower than ususal - will boost speed 12 pro resolve this issue?
auslogics driver updater shows the same driver needing updating over and over like its not doing its job - why is this?? - does the program not work??? - will boost speed 12 pro resolve this issue?
when i turn my pc on it takes like 30 sec to get to the windows screen where it use to take less than 3 seconds - will boost speed 12 pro resolve this issue?
my pc seems to lag and slow down while having multiple programs open and running at the same time where when it use to not do this. - will boost speed 12 pro resolve this issue?
internet speed seems extreamly lower than ususal - will boost speed 12 pro resolve this issue?
auslogics driver updater shows the same driver needing updating over and over like its not doing its job - why is this?? - does the program not work??? - will boost speed 12 pro resolve this issue?
File and Printer Sharing
File and Printer Sharing won’t stay “turned On” if i activate it and save then i go backt it is off again
Win10
Win10
PROVING
How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
ERROR CODE 80072EFE WHILE UPDATING
HELLO
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
Windows Startup
A text box appears "A new item was added to Windows" (or something like this). When I click on Inspect, I get a long list of items which baffles me. It would help if text box, or item list, would identify the new item because I can't figure it out. Thanks.
I want to remove the arrows on the deskyop icons
I want to remove the arrows on the deskyop icons, see the enclosed picture
Tony Bell
Tony Bell
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
адаптер блютуз
Здравствуйте! У меня стоит 7 проф, подсоединил блютуз адаптер ВСМ20702. Устройства видит, но драйвера не ставятся, соотвественно не работают. Пытался обновить, результат тот же. Устройства - айфон 6с, jbl колонки и пр.
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
disable registeruserdevice
how can i disable registeruserdevice? File does not exist, and ias dangerous
MSFS e Windows10 PRO
Hi, I own BS12 on two pCs. One PC I use only with gaming apps and the other and I use it exclusively for home, online and with the web. BS12 on pc where I don't play works great. BS12 that works on the pc where I play and in particular with Microsoft FlightSimulator, BS12 after thorough cleaning tends to get your PC blocked. I tried to exclude gaming apps but apparently windows is tightly connected. I had to reinstall windows 10 pro. In my opinion, it also depends on the Deep-Clean function and Empty Folders Cleanup. I can't use these two functions. On the pc where I play I am not satisfied! On the pc I use for all other functions is OK. Tips?
Напортачил...
Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
WDF_Violation every time I shut down W10-pro
Hello,
every time I shut down W10-pro, the system after ~7 seconds I click on the shutdown button and W10 starts the procedure it shows the blue screen with WDF_Violation error message. I have updated all the drivers, but the issue remains.
I have this problem since a certain W10 update (in fact when I reverted that update the problem desappeared).
Thanks a million, in advance for your reply!
Cheers,
Alex
every time I shut down W10-pro, the system after ~7 seconds I click on the shutdown button and W10 starts the procedure it shows the blue screen with WDF_Violation error message. I have updated all the drivers, but the issue remains.
I have this problem since a certain W10 update (in fact when I reverted that update the problem desappeared).
Thanks a million, in advance for your reply!
Cheers,
Alex
Boostspeed Background Optimization
Hi,
I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?
Regards,
Rishi
I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?
Regards,
Rishi
Language bar disappeared after using your software
Hi,
after I installed and used BootSpeed, the language bar is gone.
In windows the option "use the desktop language bar when it's available" is on but even so the language bar is missing from the taskbar in Win 10.
I really need it back.
after I installed and used BootSpeed, the language bar is gone.
In windows the option "use the desktop language bar when it's available" is on but even so the language bar is missing from the taskbar in Win 10.
I really need it back.
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7