720 questions
Translate

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
2 views
23 hours ago
Translate

Auslogic Disk Defrag Programs NOT WORKING.

I have been using DiskDefrag for TEN years to successfully defrag my C: drive.

Starting last month Disk Defrag is not defraging my disk. I purchased the newer Disk Defrag 10 version and it performs exactly the same way.

Each time it runs it reportes processing a few dozen files and states Defragmentation complete, while the visual representation of the disk hardly changes at all - that is almost ALL the Red squares remain on the diagram.

Below is the image of my disk status after running DiskDefrag 20+ time; each time it reports "Defragmentation Complete"

Please contact me with a solution.

Content hidden to protect privacy

19 views
Apr 12, 2021 at 09:42 PM
Translate

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

14 views
Apr 12, 2021 at 02:40 PM
Translate

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

9 views
Apr 11, 2021 at 03:29 AM
Translate

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
12 views
Apr 10, 2021 at 08:00 PM
Translate

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
10 views
Apr 10, 2021 at 05:05 AM
Translate

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

10 views
Apr 09, 2021 at 04:28 PM
Translate

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
14 views
Apr 08, 2021 at 07:05 PM
Translate

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

51 views
Apr 08, 2021 at 01:17 AM
Translate

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
44 views
Apr 07, 2021 at 05:09 PM
Translate

activacion Pro

Por favor quiero actualizar mi version a Pro

55 views
Apr 03, 2021 at 10:27 AM
Translate

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
49 views
Apr 02, 2021 at 06:15 PM
Translate

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
54 views
Apr 02, 2021 at 03:28 PM
Translate

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
58 views
Apr 01, 2021 at 02:28 PM
Translate

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli
93 views
Mar 29, 2021 at 02:21 AM
Translate

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

78 views
Mar 28, 2021 at 11:08 AM
Translate

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

86 views
Mar 27, 2021 at 09:53 PM
Translate

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
96 views
Mar 26, 2021 at 10:52 PM
Translate

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
130 views
Mar 25, 2021 at 07:30 PM
Translate

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
118 views
Mar 25, 2021 at 01:02 PM
Translate

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

253 views
Apr 28, 2020 at 02:59 AM
Translate

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

251 views
Apr 27, 2020 at 08:51 AM
Translate

Do I need to defrag/optimize SSD

I have installed a new 1 TB SSD on my laptop. Your program initially set up to optimize and defrag it. I researched online, and no one recommends doing this as it will dimish the life of the SSD. Questions:

1. Do I need to enable this option?
2. Will using this program to clean up the registry do any damage or shorten life of the SSD?
3. I found online that it is not recommended to shred files on an SSD. If I have sensitve files that I deleted, on a SSD, is it permanently removed/unrecoverable by deletion or I should still use your shred operation?

In all of the above, I just want to make sure your program doesn't damage the life of the SSD. I also want to know if your features affect the SSD negatively or if it is needed at all. What is the positive impact of it on my SSD and operation?

251 views
Aug 09, 2020 at 10:51 PM
Translate

windows random shutdown

event viewer shows kernel power error after I restart the laptop.
kindly help thank you.
251 views
Oct 24, 2019 at 04:24 PM
Translate

Медленно загружается

Медленно загружается, особенно Google. Что делать? Версия Windows 7 Home.
250 views
Nov 10, 2019 at 07:11 PM
Translate

Problemas de apagado

Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion

249 views
Jun 16, 2020 at 01:36 PM
Translate

File Shredder

I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?

248 views
May 23, 2020 at 12:40 PM
Translate

Windows Security - Account Protection

"Dynamic Lock is not working because Bluetooth is off."

I do not know what device to try to turn on to Bluetooth.

Thanks in anticipation.

Mike Kemp

Mobile:

Content hidden to protect privacy

247 views
Jul 17, 2019 at 08:37 AM
Translate

IMEがスキャン後停止する。

Windows10のinsider Programに参加しています。 Boostspeed10を1年半ほど使っており、Win10 build188xxごろまでは問題がありませんでした。ところがそれ以降のビルドから、IMEが無効になるようになり、Windows のバグかと思っていました。
ところが、ふと思いついてBoostSpeedのスキャンで削除したファイルを戻すと、IMEが復活しました。 Windowsのアップデートの際にBoostspeedとバッティングするような変更があったのかもしれないと思っています。

今、Boostspeed11を使っており、システムにかかわる項目を大幅に外して使っています。
いつも使うのは クリーンアップと保護です。
トラブルはIMEだけですので、IMEにかかわる項目だけ外してスキャンしたいとおもいます。
クリーアップ・保護の項目で外すべきものをお教えください。

247 views
Dec 04, 2019 at 12:32 PM
Translate

older auslogic boostspeed

dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work

dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,

Content hidden to protect privacy
or | santa9785 |

247 views
Nov 05, 2019 at 03:55 AM
Translate

selezione cartelle

Salve, vorrei sapere se nella versione registrata si ha la possibilità di selezionare le cartelle riguardo alla ricerca di duplicati o altro ?
cosa che invece non mi è stata possibile nella versione di prova del vostro "AUSLOGIC BOOTSSOEEDE11-
UTILIZZO windows 7
Grazie Massimo

246 views
May 11, 2020 at 10:14 AM
Translate

Remote Desktop Service is disable by some process

My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?

246 views
Nov 01, 2019 at 05:02 PM
Translate

how to find and permanently scrub wipe erase delete WIN10 VSS/ Shadow Copy files

Have disabled VSS ok.
Can find no way to erase existing files created by VSS, and they have eaten up neary 50% of my hdd over the last year.

Any help much appreciated!

Best Regards,
Scotty :-)

246 views
May 24, 2020 at 08:18 PM
Translate

cannot restore

how can I restore my mobile hotspot?

246 views
May 25, 2020 at 02:09 PM
Translate

game crash

Hello. When you start any game while the program is running in the background, it crashes to the desktop. When you exit the program, there is no departure. Is this what you should do when starting games? Game optimization has been activated.
245 views
Sep 02, 2020 at 06:27 PM
Translate

микрофон

при проверке все нормально а голоса нет что только неделал

245 views
Jun 22, 2020 at 09:21 PM
Translate

Загрузка с SSD

Добрый день!
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
245 views
Jul 13, 2020 at 12:15 PM
Translate

VPN FortiClient

I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.

Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.

I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.

Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.

245 views
Oct 16, 2019 at 11:25 PM
Translate

Sudden switch to No Error Mode

I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me

245 views
Nov 08, 2019 at 09:15 AM
Translate

On the subject of Devices

Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?

244 views
Jun 16, 2020 at 06:03 PM