1890 questions

how to delete advertisement

Hello

So many advertisement appear when I access the web site. I cannot concentrate on reading because of this. I appreciate if you tell me how to solve this problem.

Thank you.
841 views
Apr 21, 2023 at 10:09 AM

Is my subscription good for another device?

How many devices are covered by my subscription?

I have another laptop that I want this service on.

Guy Veasey

585 views
Apr 20, 2023 at 12:49 AM

Avira completly mess up my whole computer

Hello,

Thanks for your software, it looks great.

I am in a terrible position, Avira made a smart scan and update " windows 11 22H2 " register file while I was on windows 10.

It broke my whole OS, now I am on windows 11, I hate it. But at least I got internet back, even if my processor is still at 80% while nothing is happening.

I have to much configuration on my software (audio, advanced date management), and have a lot of work to do this week for clients. I can't just wipe my whole system it will take me at least 40 hours to reconfigure everything to be able to work.

I just found your services while comparing on internet what could help me.

I can pay for a paid plan buy I just need help fixing my register and my OS back even if windows 11 is just hell....

I don't know what to do, i suppose there is no way back, my last snapchot was 2 month ago which is way to far.

694 views
Apr 19, 2023 at 01:35 AM

Cannot Start Microsoft Outlook. Cannot open the Outlook window.

Hi there,
I was in the middle of deleting one of the 5 email addresses in my Microsoft Outlook and the laptop stopped (or this Outlook application) stopped responding for over 5 minutes so I "ENDED" the process.

Since then I keep getting this Outlook error.

I have tried the Office repair utility.
I have tried restarts.
I have your software (paid version) on my laptop but am unsure whether there is a restore point I can get to that will enable me to get Outlook going again.

Help please :)
730 views
Apr 16, 2023 at 07:42 AM

Зависание системы

Здравствуйте! После того, как установил файл подкачки на свой SSD диск(400, 2048) стала очень плохо работатать система и всё начало лагать. "Системные прерывания" ни с того, ни с сего стали нагружать систему, как и Antimalware Service Exucutable(до этого системные прерывания не вылезали в диспетчере задач, или по крайней мере я это не замечал. А о ASE я знаю) Было подозрения на майнер, так как процессор стал грузиться на 100%(даже сейчас он скачет с 90% до 40%), но когда я проверил всё через Dr. Web и ваше приложение это ничего не показало. Turbo Boost отключён .Помогите пожалуйста!
590 views
Apr 16, 2023 at 05:31 AM

chrome

my chrome video is not working
619 views
Apr 15, 2023 at 05:49 AM

Not Responding

What causes 'not responding'whether It is browsers not responding or more commonly, file folders not responding and crashing my computer but not my browsers.
618 views
Apr 14, 2023 at 11:04 PM

Licence Auslogics

Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
611 views
Apr 14, 2023 at 09:49 AM

battery life

How can I extend the battery life?
634 views
Apr 14, 2023 at 07:47 AM

Win 11 , Updateannahme

Ich habe zwei Win11 Update die von meinem PC nicht angenommen werden. Wie kann ich diese löschen?

2023-04 Kumulatives Update für Windows 11 für x64-basierte Systeme (KB5025224)

2023-02 Kumulatives Update für .NET Framework 3.5, 4.8 und 4.8.1 für Windows 11 für x64 ((KB5022730))
703 views
Apr 12, 2023 at 12:02 PM

Condition of SSD

What does "Parameter in poor condition and requires attention' mean and how do I fix it please? Cheers, James
678 views
Apr 05, 2023 at 03:12 PM

slow start

Bootspeed is very slow to open on my pc.
621 views
Apr 05, 2023 at 02:53 PM

BoostSpeed reading errors

On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
614 views
Apr 05, 2023 at 12:18 PM

Where to find the Optimize Tab

In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
581 views
Apr 04, 2023 at 04:14 AM

How do I correct index entry errors?

How do I correct index entry errors?
711 views
Apr 03, 2023 at 05:58 PM

how to update my ssd

hi would like to update my ssd drive how please
569 views
Apr 03, 2023 at 02:44 AM

синий екран с ошибкой 0ха0000001

Добрий день как исправить проблему с ошибкой 0ха0000001 способи с ютуба не помогают через програму я вияснил повреждений файл amdkmdag.sys но не знаю что с ним делать пожалуста помогите мне.
598 views
Apr 02, 2023 at 10:32 AM

Privacy Monitoring

Does Auslogics have a feature to stop data broker sites from obtaining personal info?
554 views
Apr 01, 2023 at 07:56 PM

upgrade

do i need an upgrade for home use only
599 views
Apr 01, 2023 at 08:59 AM

C:/ Program

I have a problem:
After start windows appears this:
C:/ Program
Files/ WindowsApp/Microsoft.549981C3F5F10_4.2204.13303.0_x64__.../Win32Bridge.Server.exe
Incorrect Function

Can it be fixed anyhow? Thanks Frank
645 views
Mar 31, 2023 at 02:37 AM

unexpected configuration

how to reselove unexpected configuration 0x80004005 when I try to pring
1257 views
Jul 07, 2020 at 01:26 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1257 views
Mar 25, 2021 at 07:30 PM

Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい

Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。

1257 views
Jan 06, 2020 at 07:07 AM

Eliminate Devices to be scanned by the software.

When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.

1256 views
Jun 12, 2020 at 02:27 PM

problem after running resolve all issues early this morning

All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
1256 views
Jul 26, 2020 at 10:15 PM

Auslogics BoostSpeed 12 Error

ご担当者様
Error 0x00000002 ?
解決方法を教えてください。

1256 views
Jul 07, 2021 at 02:35 AM

Can't install update

On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.

1256 views
Oct 28, 2019 at 01:45 PM

Windows Update Error

How do I fix error - 0x800700c1
1255 views
Jan 05, 2021 at 12:14 AM

WiFi keeps disconnecting

For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.

Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
1254 views
Aug 18, 2020 at 02:08 PM

Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».

Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр

1252 views
Dec 11, 2020 at 08:09 PM

toggle "attempt to change DNS" notification.

This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!

1252 views
Aug 20, 2020 at 06:34 PM

Updates Inoperative

Windows shows installing but nothing happens.

1251 views
May 19, 2020 at 10:33 PM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1250 views
May 03, 2020 at 04:35 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1250 views
Apr 12, 2021 at 02:40 PM

pc unplugged ac adapter pc shuts down with battery charged at high percentage

my laptop has new battery, but when i unplug the AC adapter my laptop shuts down when it has a high charged percentage battery. how in settings to fix please.. oh, and my battery cannot be taken out in my asus pc
1248 views
Jul 19, 2019 at 03:46 AM

Delete"pagefile.sys"

Please edit a BAT file to clean up the C disk for me.
My Email"

Content hidden to protect privacy
"Thank You Very Much.
I wanna delete"pagefile.sys"

1248 views
Aug 30, 2019 at 01:57 PM

key product W10PRO missed

Hi, I have AuslogicsBoostSpeed ​​11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex

1247 views
Oct 25, 2020 at 05:01 PM

cannot open links in OUTLOOK

I cannot open hyperlinks in Outlook. My system is always saying that opening isn't allowed.
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)

Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.

Please can you help me : I'm searching to find a solution for more than a full year...

File in attachment : extension .reg was changer in .txt to permit the file to be sended.

Thanks on beforehand !
Jaak Valembois
1247 views
Jan 12, 2021 at 05:52 PM

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?

1243 views
Dec 13, 2019 at 07:36 PM

My Windows 10 Pro version asks for activation

Hello,
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
1243 views
Aug 23, 2020 at 11:40 PM