1795 questions
Заблокирован доступ к системному файлу
Не возможно изменить или удалить системный файл (C:\Boot\BCD), т. к. он занят и ократ в SESTEM
Perdi minha chave do Windows Original OEM apos executar o BootSpeed13
O que eu devo fazer para recuperar minha chave do Windoss Original? Pois apos instalar e exceutar este programa, tive este prejuizo inacreditavel.
Windows Explorer Is SLOW To Search For Folders
Windows Explorer Is SLOW To Search For Folders when I try to SAVE any type of file. The Scroll Bar at left side keeps jumping up & down, then the cursor begins to spin & spin as if in a freeze mode. Finally, all of these ODD Actions STOP & CALM DOWN. Then it
FINALLY allows me to click & select the Folder I need to get into. This is STRANGE. Can you explain WHY this is happening ?? YES
-- I do use AUGLOGICS Boost Speed 13 (UPDATED) to do Maintenance & CleanUp on my Laptop (Windows 7), but still this problem does NOT want to go away. YES -- I did INDEXING Function several times on my Laptop, but still no improvement. Do You Have ANY
Suggestions for me ?? Other than to do a Complete Factory RESET of My Laptop ??
FINALLY allows me to click & select the Folder I need to get into. This is STRANGE. Can you explain WHY this is happening ?? YES
-- I do use AUGLOGICS Boost Speed 13 (UPDATED) to do Maintenance & CleanUp on my Laptop (Windows 7), but still this problem does NOT want to go away. YES -- I did INDEXING Function several times on my Laptop, but still no improvement. Do You Have ANY
Suggestions for me ?? Other than to do a Complete Factory RESET of My Laptop ??
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
TouchPad does not work after go to Windows 11
I have Lenovo Yoga C940-15IRH and the touchpad does not work
It worked with windows 10.Now in Windows 11 nothing work.
I tried to uninstall the driver and to update Windows. does not work
Thanks a lot
Moti
It worked with windows 10.Now in Windows 11 nothing work.
I tried to uninstall the driver and to update Windows. does not work
Thanks a lot
Moti
Background processes
I have the idea that background processes lower the framerates of my flight simulator, leading to stutters. When I examine the resource monitor, I see that about 200 background processes are running, even when totally none program is active. I cannot image why all those processes are neccessary. All those processes have names that doesn't give my any insight in what all those processes are doing. How can I find out which processes I can stop and which are mandatory?
Re-enable the Windows key on the keyboard
How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
Addressing a specific drive
Firstly, what a wonderful piece of software. Always very cautious about programmes which can permanently delete items and never apologise when deleting an incorrect one. So far this is behaving perfectly.
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
My question is, is it possible to adress just a specific disk, for instance, can I ask the software to only process a requirement on my I drive or any other drive.
By chance is this an Australian designed programme?
Sincerely
John Terry
Games
Ohh Subcatagory ..culdnt select SoF2 for you ..i deleted it out of.. mm :) anger ..agin 2-3years in a row Ok, my msg -> Yes.. Hello! Mm i wanted to ask how come its harder to play older games on a newer stuff.. W8 not play just run the "damn" thing :) Why so hard.. Oh and thta password to get to here ..i forgot it allready ..ill create a new one next time But yes the games ..old .."old" games ..i did everything.. whell.. i dieled it doen to win7 .. should i gone xp? I just deleted ..evcerything But io loved that game SoF2.. Oh since your here ..can you tell me the difference betwean BoostSpeed13 and Essentials ..Thank you , Regards Mitja
won't post
Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
Asus boost speed 13 upgrade
I am the Ceo of 4 companies in south africa you can look up mark webb ceo south africa on linkadin I have been using your amazing product for many years please refer to my account the reason i am writing to you is i find the way you go about bringing out boostspeed 13 then giving me a discount is in my opionion not the best way to keep customers comming back
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Mark Webb
CEO
Flexibreaks holidya and travel club
0828515607
i have +- 180 days left in 12 you bring out 13 and offer me a discount to me this is not right i paid for 12 i still have 180 days left what i feel you should of done rather was to allow me to upgrade free to 13 but only keep 180 days when it expires guess what i will buy a new 13 license
or how about you look at each person account to see how long they have supported your product and then give them a low low upgrade price my price in south afdrican rands is +- 360 rand i have refered numerous employees to use your product because i can stand behind it knowing how good it is
Mark Webb
CEO
Flexibreaks holidya and travel club
0828515607
Intallation original software error
please help I can't install the original Imindmap 11 ultimate software, the picture message is attached
Upgrading Windows Vista to 10
I have an old Vista laptop and it's pretty slow. Can I upgrade it to Windows 10? Can I use BoostSpeed on Vista?
defrag 10 running sooo slow
Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?
This app won't run on your pc
I purchased this software to get rid of "This app won't run on your pc". So far, I have not managed to solve the issue. Is this software capable of fixing this problem?
Thank you,
David Jenkins
510.414.6175
Thank you,
David Jenkins
510.414.6175
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have just purchased a USB-C Gigabit Ethernet Mini Adapter and I cannot connect to the internet with it. The device connects to my computer and is recognised, but it says "Unidentified Network" and underneath "No Network". My machine uses Windows 10. Can you help fix this problem?
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
exploler.exe ошибка приложения сервиса
ПОДСКАЖИТЕ ЧТО ДЕЛАТЬ я очистил ненужные папки в как вдео иображения музыка перезагрузил ноутбук октрываю проводник жду секунд 10 пишет exploler.exe ошибка сервиса преложения и так каждый файл по типу панели инструментов скажите что делать пожалуйста а то меня мама убьет елси узнает она просто инода заходит в мой ноут и бдет спрашиват что уже бл такое и все пипец мене скажите прошу вас переустановка я оюсь делать это или мне надо вызывать мастера , еще я смотрле в инете что там водишь команду srw /scannow пошло до 84 процента сморю пишут показало есть неисправеные файлы исправил некоторые неисправились перезгрузили комп или ноутбук и появился синий экран оно дошло у меня до 84% и я остановил и я сейчас НЕЗНАЮ ЧТО ДЕЛАТЬ СКАЖТЕ ПОЖАЛУЙСТА ЧТО ДЕЛАТЬ ПРОШУУУ ВАС ОТ ВСЕГО СЕРДЦА
НО СЛИ ВЫБИРАЮ ЛЮЮ\БОЙ ФАЙЛ В ВАШЕМ ПРИЛОЖЕНИЕ ВСЕ ОК ЧТО ДЕЛАТЬ Я ВЫДЕЛЮ ЛЮБОЕ ХОРОШО Я ПРОСТО ХОЧУ ЧТОБ ВЫ ЭТО УВИДЕЛИ
BoostSpeed Messages
I am not using the computer a lot, but BoostSpeed is regularly giving me messages to do scans or to defrag my SSD. How can I reduce the frequency of these messages?
Intermittent PC Crashes/Freezes
To Whom It May Concern,
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
Disengaged Microphone
I performed some of the scans and tweaks, which resulted in my system's microphone being disengaged. How can I re-engage the microphone that I need for my webinars.
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
WIndows Security closes when opened
Hi I'm Raffy and a New member of the Auslogics
When I open Windows Security Application it closes immediately
how do I fix it
completed (order number: 3088xxxxx).
i cannot start boostspeed. they say its for my safety. i do not understand this
C:\Program Files (x86)\Auslogics\BoostSpeed blocked by integrator
Windows Defender Disable Remove
I WOULD YOUR HELP REGARDING REMOVE WINDOWS DEFENDER BECAUSE MY LAPTOP GOES VERY SLOW WHEN IS ON
THANK YOU
SAKLIS DIMITRIS
THANK YOU
SAKLIS DIMITRIS
WINDOWS BEHAVING IRRATICALLY
ive been having a lot of problems with windows like windows hangs with static playing through the speakers or randomly restarts or the blue screen of death and even the blue screen error message
ive tried all your fixes pertaining to my issues but it doesnt seem to have helped all that much
please help
ive tried all your fixes pertaining to my issues but it doesnt seem to have helped all that much
please help
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
i got few problems with nmy network can u help please
hi
how are you
i need help please
i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them
thanks ^^
how are you
i need help please
i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them
thanks ^^
Skype cannot sign in for several time
Hi,
It's pretty offen when my Skype cannot login or I'm unable to make any calls or send messages. My connection is fine, Windows works pretty good. Is ther any way to understand wha't going on?
It's pretty offen when my Skype cannot login or I'm unable to make any calls or send messages. My connection is fine, Windows works pretty good. Is ther any way to understand wha't going on?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7