1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Right click loads too long on files and apps
I recently updated my windows 8.1 to windows 10 and now my right click is loading too long when I right click on files and apps.
And I have tried every possible method and still can’t solve it.
And I have tried every possible method and still can’t solve it.
Program opening
My subcategory would have been the Boostspeed program but wasn't listed so I chose any in order to get the question submitted.
I am using Version 12 of Boostspeed on a Windows 7 platform. My question is: Why does it take so lone for the program to open when double clicking the icon from the Desktop?
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
USB Flash Drive is corrupted and not readable
I have a corrupted USB drive and now I can't access anything on it. I don't care about the files on it now. I would like to know is there a way to UN-corrupt it in your tools. I would just like to be able to use it. It's a pretty new flash drive - only used a few times. I think I killed it when I pulled it out after it gave me a warning. I wasn't able to get the warning to go away.
Thanks.
Paul
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Partition management
I want to change the partitions on an SSD that i use for instant backup. I was hoping Boostspeed had this functionality.
If it exists, please point me to it.
Thanks
Ed
If it exists, please point me to it.
Thanks
Ed
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Auslogics Boostspeed 13 TRIMMING SSD Hang at 3% unable to complete SSD Optimization
When running Disk Defrag Optimization Auslogics Boostspeed 13 Pro hangs at 3% "Preparing" when running TRIMM on external SSD and creates a file on external SSD with the following each time Optimization is run:
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.
Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.
Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Computer randomly turns off but i can turn it back on
While i am playing games my computer seems to suddenly turn off i can turn it back on with no problem but it randomly happens every 2 hours ish.
Activate Pro Version
Pro Version cannot be activate on Windows 11 insider preview Build 22543.rs_prerelease.220122-2315.
Disable textinputhost.exe on Windows 10
Hi there
This file is obviously spyware, and logs every key stroke one makes. I use to be able to disable it and did delete it using BoostSpeed13, but now it has locked itself, so i can no longer disable or delete it.
When i disable it, it shows in the task manager and the Services tab that it is still running even with it being disabled. If i close it using task manager, as soon as i hit a key on the keyboard, it reopens. There is one other program that is very similar to this and also opens and runs, clipmanager i think it is called. I can disable this, but it also comes back, not immediately but normally within the day.
How can i deleted these files or disable them perminently - they were never part of Windows 10 until very recently, so hence i beleiev e they are key logers and spyware.
Thanks in advance
Gav
This file is obviously spyware, and logs every key stroke one makes. I use to be able to disable it and did delete it using BoostSpeed13, but now it has locked itself, so i can no longer disable or delete it.
When i disable it, it shows in the task manager and the Services tab that it is still running even with it being disabled. If i close it using task manager, as soon as i hit a key on the keyboard, it reopens. There is one other program that is very similar to this and also opens and runs, clipmanager i think it is called. I can disable this, but it also comes back, not immediately but normally within the day.
How can i deleted these files or disable them perminently - they were never part of Windows 10 until very recently, so hence i beleiev e they are key logers and spyware.
Thanks in advance
Gav
ソフトを起動しようとすると保護がかかってしまいます。
Auslogics BoostSpeed 12をしようしていますが、最近になってソフトを起動しようとすると下記のメッセージが表示されます。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
Second PC Monitor Not Recognized and Screen Resolution Fuzzy on Both
I have an 11 year old PC running on Windows 10 and recently the PC stopped recognizing the existance of my second monitor, but the first and second monitors are working and showing identical screens/information. The identical screens are out-of-focus/fuzzy as well. I have attempted to find a solution on my own without success. I'm sending this message from a different device, so there is no other info about the PC, other than it continues to work OK. I hope you can help me with this issue. Thanks.
question about WIN10 servises
how can I stop the unnecessary servises in windows10? without harming to my divice or OS.
windowsの立ち上がり時間の表示設定
貴社のBoostSpeed12Proを使用していますが、ｐｃ電源ＯＮからwindowsソフトが立ち上がる迄の時間表示の設定手順を 教えて下さい ・・・宜しくお願い致します。。。
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7