1854 questions
fonctionnement quotidien
Bonjour,
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
Auslogics scans
I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
Registry Cleaner
Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish
I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
Defragmentierung einer virtuellen Festplatte
Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
Cannot reinstall MS365 after gone missing
my current & active MS365 suite just vanished from the system, and when I try to download/install the apps on my laptop, it get all the way through the process untl final 10% when get error mressage 30015-11(3221225506). I have dismounterd all system defence software (firewalls, defender, anti-virus) while downloading to remove these as potential constraints, and I have enabled the Windows Update features on the services list (cmd - services.msc)- which were showing as disabled. These however always revert back to 'disabled' once leave the page/screen. I also ran sfc /scannow to check for corrupted files - but all good. Can you assist please
Microsoft activation request when there is already validated OEM version on laptop
How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
habe doch freischaltcode von computerbild
warum kann ich nicht freischalten, wenns nicht geht dann behaltet es eben da bin ich weg
Nach Scannen und alles reparieren kein W-Lan
Nach Scannen und alles reparieren kein W-Lan mehr.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
Windows 11 Task Bar Not on Top
In Windows 11, when I move the cursor to the bottom of the screen, the task bar does not pop up unless I touch a corner of it. And when it does pop up, it doesnot pop up on top of other windows on the screen. Is this a known issue with windows 11 or is thjere a setting I'm missing?
Keith Johnson
Keith Johnson
Unstable screen images
My screen images can shake slightly and a purple haze appears on and off. Sometimes computer won't restart. Please advise.
corrupt window 10
can you fix it - micosoft support cant, need to instal new version., windows softare install fails rest option fails
affichage parasite par gigabyte
Comment éviter l'apparition d'une fenêtre parasite "APP center" de Gigabyte ?
Cette fenêtre s'affiche chez tout utlisateur NON ADMINISTRATEUR et ne peut pas être supprimée.
Seul l'utlisateur ADMINISTRATEUR peut la suprimmer via le gestionaire de tâches en faisant FIN DE TÂCHE sur 2 applications Gigabyte.
Merci d'avance
Cette fenêtre s'affiche chez tout utlisateur NON ADMINISTRATEUR et ne peut pas être supprimée.
Seul l'utlisateur ADMINISTRATEUR peut la suprimmer via le gestionaire de tâches en faisant FIN DE TÂCHE sur 2 applications Gigabyte.
Merci d'avance
Disc Clean Clobbers VS Installer files
After I clean my disk, it seems that some VS Installer files are removed, such that it loses track of my installed versions of VS 2019 and VS 2022.
How can I protect that particular installation?
How can I protect that particular installation?
how to fix stop code kernel data inpage error
My computer have this problem very often can you help me, please. Thank you so much
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
Question about conflict with avanced programs
Hi, i have installed in my notebook windows 10 home some avanced programs, my question is... if i install Auslogics Boostspeed 11, what configuration i need to make? I dont like to have problems with this avanced aplications
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Проблема с HDD диском
Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Windows Blickpunkt-Bilder
Nach BoosSpeed12 wechseln die Windows 10 Blickpunkt-Bilder nicht mehr und muß von mir manuell repariert werden. Welche Einstellungen können das verhindern?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
Malware
Does your program detect Malware? I have been getting the blue screen of death and the reason listed is
System Service Exception
What failed: Dot 4 sys
System Service Exception
What failed: Dot 4 sys
Disk Defrag
Buongiorno,
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
Memory management
Ultimamente y con frecuencia tengo un problema con Windows 10. Aparece una pantalla azul con un problema de Windows Memory Management. El sitio de Microsoft recomienda ejecutar desde Power Shell "dism /online / cleanup-image / restorehealth". Eso ya lo he hecho varias veces, pero aún sigue apareciendo el problema. ¿Hay alguna herramienta de BootSpeed 12 que pueda resolver este problema?
Recently and very frecuent I got a problem with Windows 10. Blue screen error with mesage MEMORY MANAGEMENT issue. Then I must to turn oof the PC and reboot. Then from Power Shell, run "dism /online / cleanup-image / restorehealth". After several minutes the problem (¿?) is fixed, but after some time, this happend again and again. BootSpeed has any tool to check and fix this problem?
Recently and very frecuent I got a problem with Windows 10. Blue screen error with mesage MEMORY MANAGEMENT issue. Then I must to turn oof the PC and reboot. Then from Power Shell, run "dism /online / cleanup-image / restorehealth". After several minutes the problem (¿?) is fixed, but after some time, this happend again and again. BootSpeed has any tool to check and fix this problem?