1858 questions
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか?
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか?
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか?
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
Startup Applications Automatically Getting Disabled
Startup Applications Automatically Getting Disabled. They are enabled in the startup in Task Manager and then disabled when I restart the computer. How can I fix this?
optimize put topaz studio into reccle bin
recycle bin is getting ful ans auslogics wants to empty it. How to I get topas=z back
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
Проблемы с fps в играх
Здравствуйте, недавно начались проблемы с игровым ноутбуком, а именно низкие fps в играх, для сравнения, буквально месяц назад в игре counter strike global offencive было больше 200 fps, на данный момент выше 60 не поднимается ( проблема не в самой игре, в других тоже самое даже на низких настройках ) Ноутбуку год. Пересмотрев множество видео с вариантами решения проблемы, все равно не повышается качество игры. Уже и очистку, и сканирование делала с помощью вашей программы, все равно не выходит. Пытаюсь также драйвера обновить. Подскажите, пожалуйста, что нужно сделать.
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
pictures
After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
key not working.
The following two keys of my Dell Inspiron laptop is not workin ;
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好,我用Auslogics BoostSpeed 13进行了数据清理,清理之后,我的戴尔笔记本(DELL 5520)无法连接无线网,使用外置网卡、外接网线都无法连接网络。请问应该如何解决?期待您的回复,您也可以回复我的邮箱:
Content hidden to protect privacy
Fn клавиша на ноутбуке
Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
computer desktop icon not working properly
after changing the icon of the desktop basket, the view of the basket stopped changing. How to fix ... The icon was downloaded from the Internet and I like it (I don't want to delete it)!
Процесс System грузит процессор.
Добрый день, хотел бы задать такой вопрос, процесс System очень сильно грузит процессор призапуске определённого приложения, загрузка порядка 33%-35%. Но если это приложение отключено и запущены какие то други программы, то всё в порядке, System процессор не загружает, подскажите можно ли это как то решить?
problems with google and passwords
since I'm install Aulogics and run the program it keeps deleting my programs password and when I try to oprn (IN GOOGLE) facebook I'm getting unresponsive pages....but if I open facebook with EDGE I have no problems.....can you help?
allen iglicki
allen iglicki
Cannot open Auslogics 12 on my other laptop
Hi, this may have come through twice, sorry if it has, but I have 3 laptops which I pay to use your excellent software. My other laptop, a Lenovo T520 is showing an error message from MS ...the adminsitrator has blocked me from running the auslogics app. It then says contact the adminsitrator...I am the adminsitrator ..the only user of that machine. Does MS have a problem with Auslogics? Can you help me sort this problem out and enable me to open your software as and wehen I need to...weekly? VMT Chris
Disk Partitioning Error
2 years ago, I was messing around with dual-booting and windows partitioning. So much so that an error occured. After I wasn't able to boot back into Windows 10 and deleted ALL my files, I noticed that my maximum capacity was lowered from 256gb to 237gb. It was probably from the dual-booting error. (Was trying to dual-boot an android os or a linux os or smth). I'm running out of storage because I'm too lazy to delete files and I need that 19gb. Respond ASAP, Thanks!