1858 questions
Versione Auslogics BoostSpeed 13
Gentile Auslogics, vi chiedo cortesemente se è prevista la possibilità di provare la versione Pro di BoostSpeed anche solo per 24 ore. Grazie e cordiali saluti
Eratic mouse
I have just installed a new Microsoft wireless "Comfort" keyboard an mouse.Now the mouse jumps all over the screen all the time.
I have almost no control over the positioing of the pointer. Can you help?
I have almost no control over the positioing of the pointer. Can you help?
BoostSpeed11でスキャン、不具合解決をするとGoogleDriveが終了する
お世話になります。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
BoostSpeed 13 Ansehen der Ergebnisse
Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!
Regards Hans
Im Voraus vielen Dank!!
Regards Hans
Notification about cleaning browser cache
Hi,
I get notifications that I need to clear my browser cache.
What is the best action to do so in Boostspeed 13?
I get notifications that I need to clear my browser cache.
What is the best action to do so in Boostspeed 13?
Windows 11 update not recommended for my configuration
Hello! My question is this - Why my configuration is not good enough for Windows 11? Relating to the windows update message.
The hardware is not good enough maybe?
The hardware is not good enough maybe?
how to delete advertisement
Hello
So many advertisement appear when I access the web site. I cannot concentrate on reading because of this. I appreciate if you tell me how to solve this problem.
Thank you.
So many advertisement appear when I access the web site. I cannot concentrate on reading because of this. I appreciate if you tell me how to solve this problem.
Thank you.
Is my subscription good for another device?
How many devices are covered by my subscription?
I have another laptop that I want this service on.
Guy Veasey
I have another laptop that I want this service on.
Guy Veasey
Avira completly mess up my whole computer
Hello,
Thanks for your software, it looks great.
I am in a terrible position, Avira made a smart scan and update " windows 11 22H2 " register file while I was on windows 10.
It broke my whole OS, now I am on windows 11, I hate it. But at least I got internet back, even if my processor is still at 80% while nothing is happening.
I have to much configuration on my software (audio, advanced date management), and have a lot of work to do this week for clients. I can't just wipe my whole system it will take me at least 40 hours to reconfigure everything to be able to work.
I just found your services while comparing on internet what could help me.
I can pay for a paid plan buy I just need help fixing my register and my OS back even if windows 11 is just hell....
I don't know what to do, i suppose there is no way back, my last snapchot was 2 month ago which is way to far.
Thanks for your software, it looks great.
I am in a terrible position, Avira made a smart scan and update " windows 11 22H2 " register file while I was on windows 10.
It broke my whole OS, now I am on windows 11, I hate it. But at least I got internet back, even if my processor is still at 80% while nothing is happening.
I have to much configuration on my software (audio, advanced date management), and have a lot of work to do this week for clients. I can't just wipe my whole system it will take me at least 40 hours to reconfigure everything to be able to work.
I just found your services while comparing on internet what could help me.
I can pay for a paid plan buy I just need help fixing my register and my OS back even if windows 11 is just hell....
I don't know what to do, i suppose there is no way back, my last snapchot was 2 month ago which is way to far.
Cannot Start Microsoft Outlook. Cannot open the Outlook window.
Hi there,
I was in the middle of deleting one of the 5 email addresses in my Microsoft Outlook and the laptop stopped (or this Outlook application) stopped responding for over 5 minutes so I "ENDED" the process.
Since then I keep getting this Outlook error.
I have tried the Office repair utility.
I have tried restarts.
I have your software (paid version) on my laptop but am unsure whether there is a restore point I can get to that will enable me to get Outlook going again.
Help please :)
I was in the middle of deleting one of the 5 email addresses in my Microsoft Outlook and the laptop stopped (or this Outlook application) stopped responding for over 5 minutes so I "ENDED" the process.
Since then I keep getting this Outlook error.
I have tried the Office repair utility.
I have tried restarts.
I have your software (paid version) on my laptop but am unsure whether there is a restore point I can get to that will enable me to get Outlook going again.
Help please :)
Зависание системы
Здравствуйте! После того, как установил файл подкачки на свой SSD диск(400, 2048) стала очень плохо работатать система и всё начало лагать. "Системные прерывания" ни с того, ни с сего стали нагружать систему, как и Antimalware Service Exucutable(до этого системные прерывания не вылезали в диспетчере задач, или по крайней мере я это не замечал. А о ASE я знаю) Было подозрения на майнер, так как процессор стал грузиться на 100%(даже сейчас он скачет с 90% до 40%), но когда я проверил всё через Dr. Web и ваше приложение это ничего не показало. Turbo Boost отключён .Помогите пожалуйста!
Not Responding
What causes 'not responding'whether It is browsers not responding or more commonly, file folders not responding and crashing my computer but not my browsers.
Licence Auslogics
Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
Salutations cordiales.
André
Win 11 , Updateannahme
Ich habe zwei Win11 Update die von meinem PC nicht angenommen werden. Wie kann ich diese löschen?
2023-04 Kumulatives Update für Windows 11 für x64-basierte Systeme (KB5025224)
2023-02 Kumulatives Update für .NET Framework 3.5, 4.8 und 4.8.1 für Windows 11 für x64 ((KB5022730))
2023-04 Kumulatives Update für Windows 11 für x64-basierte Systeme (KB5025224)
2023-02 Kumulatives Update für .NET Framework 3.5, 4.8 und 4.8.1 für Windows 11 für x64 ((KB5022730))
Condition of SSD
What does "Parameter in poor condition and requires attention' mean and how do I fix it please? Cheers, James
Boost Speed 12
Hi Guys
Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..
Tom
Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..
Tom
Обновление драйверов
Добрый день! Насколько безопасно обновление драйверов не с официального сайта корпорации Dell? Не будет ли нанесен какой-либо ущерб в связи с обновлением ПО и дрйверами?
doublons
Bonjour , existe-t-il un logiciel (facile) , pour éliminer tous les doublons automatiquement ( sans cocher toutes les cases de tous les doublons ) . Merci , cordialement
num lock
my num lock keys does not wotk after first scan. Windows tell that I switch between num lock activate and deactivate but the number keys stays inactive. my keyboard is a logitech CRAFT and it works on a different pc.
Cleaning
Gentlemen,
I have Windows 10 64 bit. I have 1.69 TB free space of 1.81 TB. Do you think I should wipe the free space or would it just be a waste of time?
Doug.
I have Windows 10 64 bit. I have 1.69 TB free space of 1.81 TB. Do you think I should wipe the free space or would it just be a waste of time?
Doug.
Computer Fan
Why is my fan constantly running? Is there a way w/ your tool to know if it is due to a bugged process? The vents appear clean.
Pro Version aktivieren.
Your Auslogics license information, order #
Content hidden to protect privacy
Ich nutze AusLogics Boost Speed schon sehr lange - mit obigem licence key lässt sie sich nicht aktivieren.
Was ist das los - auch löschen und Neuinstallation hat nichts gebracht.
Mfg
Decker Gustav
No photo thumbnails
All my picture files used to disply thumbnails, now just icons.
How do I restore?
How do I restore?
To TRIM or to Defrag? Or Both!!??
I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate
Confused.
Simon F
Confused.
Simon F
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Вопрос об ошибке при внезапном отключении
Доброго времени суток, уважаемые специалисты!
Спасибо за возможность задать Вам вопрос.
В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.
Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?
С уважением, Ана
Спасибо за возможность задать Вам вопрос.
В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.
Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?
С уважением, Ана
disk has errors message
after using auslogics it says disk has errors . CAN THIS BE FIXED WITH AUSLOGICS
rendre les textes plus lisibles
Comment augmenter la grosseur des caractères, pour les rendre plus lisibles.
Problems with Windows Update-Valentin Batalak
Hello,
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Regards,
Valentin Batalak
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Regards,
Valentin Batalak
Очистка диска
Как и что лучше всего почистить системный диск. Уже занято более 100ГБ. Все документы/временные файлы/загрузки уже перенесены с диска.
Defrag or No?
Hi
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
Windows 10 Default System font changed
Hi,
After running all the Auslogics BoostSpeed 12 suggestions, the default system font changed into a horrible blurry type of text. This is across the whole system, including File Explorer, Chrome, Microsoft 365 Office apps (Excel, Word, etc), basically everywhere!
I've attached a screenshot from Chrome to illustrate what the default font looks like now.
How do I restore the original default system font?
Thanks and regards
Andrew
Malwarebytes
How do I avoid the manual suspension of Malwarebytes that does not allow Auslogics software to install due to identfying it as a PUP?