439 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

127 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

125 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

103 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
110 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

104 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

180 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

102 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

134 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

122 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

102 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

130 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

138 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

283 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

160 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

140 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

172 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

143 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

169 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

153 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

155 views
Apr 16, 2020 at 08:42 AM

Не работает Скайп и Outlook после установки новой версии

Если раньше после установки новой версии переставал работать скайп, то сейчас и Outlook перестал работать....
Скайп не делает звонки
А Outlook не грузится вообще....
А вроде бы раньше неплохая программа была....

170 views
Jan 05, 2020 at 01:38 PM

suddenly the cpu usage comes to 100%

Sometimes the cpu usage comes to 100%

169 views
Mar 26, 2020 at 04:12 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

169 views
Apr 18, 2020 at 10:31 AM

Система

При долгой работе Виндовс 10 начинается полная загрузка Оперативной памяти!! Что сказывается на производительности компьютера!
169 views
Jan 24, 2020 at 09:15 PM

No se le da acuse de recibo cuando envia alguna informacion. (Es una recomendacion positiva Suprema.

BoostSpeed 11 Pro being used with license: Cuando el cliente envia alguna informacion a Auslogics, si Auslogics no le da un acuse de recibo, aunque pudiera ser breve, el cliente tiene dudas de si Auslogics lo recibio.

168 views
Mar 12, 2020 at 11:58 AM

ключ продукта

ключ продукта ошибка 0x8007000D

168 views
Apr 04, 2020 at 09:23 AM

h78

Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
167 views
Jun 30, 2020 at 04:15 AM

Pop-Up Product Sales Window

Hi-

I just recently purchased your Bootspeed system--which is great and full of great features that I typically have to buy many programs to do. I keep getting an ad pop-up to buy your other products and when I check off DON'T SHOW AGAIN, it just does that. It's annoying and a turn off..

Thanks,

Steven

166 views
Mar 08, 2020 at 09:16 AM

100% disk usage

hi there, i am having a issue with my disk usage, my disk usage is at 100% a lot of the time when nothing is showing up in task manager as far as usage, any help on this issue would be greatly appreciated,
kind regards
pete

166 views
Apr 01, 2020 at 09:37 AM

programs as a threat

Dear Sir / Madam, I bought the programs Defrag, Register Cleaner and Bootspeed from Auslogics. With license. I am satisfied with the programs but Malwarebytes sees these programs as a threat. See picture. How can this and how can I solve this.

166 views
Apr 13, 2020 at 07:07 AM

windows 10

How many of the tools in BoostSpeed 11 can be used on a SSD?

165 views
Mar 06, 2020 at 03:10 PM

no windows updates

i have been trying to update to the windows march update but I can't

165 views
Mar 25, 2020 at 03:40 AM

Процессы

Какие процессы можно закрыть или остановить на компьтере, снижающие производительность и не нужные в конкретны момент времени?

165 views
Mar 29, 2020 at 04:32 AM

transferring windows

Hello and thank you for your time,
I am having trouble with finding info relative to my specific situation. I own an Asus ROG Strix GL553VD with 16 GB ram and it came with the 1 TB HDD. Ive since upgraded it to a 500 GB SSD by WD Blue as of recetly Ive also added a 120 GB NVMe m.2 SSD and Id really like to be ablr to add my whole windows OS and boot from it to achieve faster results plus Ive heard its less stress on your main drive. I recently tried copying the windows folder to it (and all 26 or so GB that it held) onto the new SSD and that obv didnt work. I have AOMEI partition pro and back upper but my Windows OS isnt on its own partition on C drive and Im finding nothing about migrating just those files or how to create a partition of just those files and I see nothing about migrating from SSD to a different SSD. Thank you for your time and potential help!

165 views
Jan 01, 2020 at 08:17 AM

Windows Key

My windows key on my keyboard does not work and I have tried to run different tasks in the task manager and several other things but nothing seems to work. I saw on your website that this program can help.

165 views
Feb 22, 2020 at 04:07 AM

Systemwide freeze

Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:

•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)

However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.

Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.

164 views
Mar 27, 2020 at 01:57 AM

Your help please

I called tech support to fix the follwintg problem "rquires elevation" I am still getting the same thing on numerous sites. Is there
no one that can fix this? Tried you on line solution but it does not work as described.

164 views
Jan 03, 2020 at 04:44 AM

Система пишет , что принтер не подключен

Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?
163 views
May 18, 2020 at 02:51 PM

Cannot get my computer to read SD cards

I've used your device driver updater and still cannot get my computer to recognize an SD disk.

162 views
Jun 25, 2020 at 09:54 PM

Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい

Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。

162 views
Jan 06, 2020 at 07:07 AM