1859 questions
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
Bluetooth driver
When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
Background processes
I have the idea that background processes lower the framerates of my flight simulator, leading to stutters. When I examine the resource monitor, I see that about 200 background processes are running, even when totally none program is active. I cannot image why all those processes are neccessary. All those processes have names that doesn't give my any insight in what all those processes are doing. How can I find out which processes I can stop and which are mandatory?
Driver is Unavailable
My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
Errors 0x80070091 and 0x8007016a
Can the pro version of Auslagics find and repair the cause of errors 0x80070091 and 0x8007016a?
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
Unable to update Windows 11 to 22H2....
My computer has stopped being able to use Windows Update to install normal updates, including Windows 11 22H2. All software and drivers are up to date. I have late generation motherboard (Asus Rampage VI Extreme), intel CPU 10980XE, and nVidia 3090. I have followed multiple scripts from the internet to clean out the software update folder. Any ideas?
советы из Youtube не помогают
Имею постоянную проблему с обновлением Windows 11. Посоветуйте действенній алгоритм решения. Или лучше переустановить?
bluetooth dissapeared from device manager after cleanup
Hi,
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
Richiesta di pulizia del browser web
Buonasera,
quando per "risolvere tutti gli elementi" la schermata mi chiede di chiudere tutte le applicazioni aperte, mi elenca n. 5 msedege.exe che non riesco a chiudere né manualmente né col pulsante "chiudi tutto". Utilizzando "Ignora", mi rimangono 214 tracce nel browser web ed il semaforo mi rimane rdi colore rosso.
Cosa posso fare?
Ringrazio anticipatamente per il disturbo.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
UPDATE
Hi.
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
slow ram
I have tried several times to speed up my computer, but to no avail... I am not very technical, so that doesnt help... the main problem is there are apps that make the screen just stop, and lag for a while... please help
Long Boot time and black screen while booting
I have a ACER Nitro 5 laptop (windows 10 home original), mainly for entry level gaming. I am using laptop/desktop from last 12 years and I have moderate knoweldge on S/w issues, how to keep the laptop fast (by defragmenting, registry cleaning etc.). Recently I am facing Boot issues thats getting frustrating. Initially it started with long booting time, it was taking 7-10 minutes to reach to user account (Pin), and during that time the CPU and GPU fan speed was getting super fast (like during heavy usage).
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
Now from last couple of days, once I switch the laptop on, no display is coming, its just a black screen. However, CPU light was on, Key-board backlit was on and fan was rotating, but no display. If I wait the also nothing happening. Every time I need to force shut down it (by long pressing) and then if I restart again, its getting started properly.
Not sure what's the issue. I have checked prgrams that starts while booting, no issue there. No external device was attaching with my laptop while booting. stopped windown fast boot service also. But no progress.
Please suggest. can it be my HDD (1 TB I have) getting damaged? suggest if any other reason might be there.
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis