1897 questions

Deleted files

When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
803 views
Jul 06, 2022 at 12:08 AM

Windows system font distortion

After running Auslogics Registry Cleaner 9, I rebooted my Windows 10 PC and now the system font is distorted in Windows and Chrome.
719 views
Jul 05, 2022 at 08:35 PM

ваш деинсталятор не удаляет эту программу

у меня ауслоджик про, платная версия. ваш деинсталятор не удаляет bluestacs.
850 views
Jul 05, 2022 at 04:10 PM

Can not print

Since I did the clean up on my computer I can not print. It is a network printer and the IP guy said the connection is good but something is blocking my computer from seeing the printer and communicating with it.
785 views
Jul 05, 2022 at 02:40 PM

Hard drive not showing up on optimize screen

When using windows explorer, a specific hard drive is not showing up when I check the optimize box. I can scan and repair it but not optimize it. I used the free degrament tool by auslogics but even after auslogics deframented it, it is not showing up.
Should I be concerned about this? What does this mean?
thank you for your response(s).
765 views
Jul 04, 2022 at 12:34 AM

PC slows down after a period of being on, following re-boot.

This has happened a while (over a year): I leave my PC on 24/7 to get updates, etc.

After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.

I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.

Have you run into this anomoly before and/or do you have a fix for this?

Many thanks!
777 views
Jun 30, 2022 at 06:08 PM

Não reconhecimento pelo sistema.

Bom dia,
Tenho uma unidade SSD externa que não esá sendo reconhecida pelo gerenciador de arquivos e nem pelo gerenciador de discos mesmo tendo feito os procedimentos básicos.
745 views
Jun 28, 2022 at 02:59 PM

Slow computer

Hello,
Before I started to use Auslogics my computer was very slow. Then I used your Auslogics and the computer was much faster. However, few days aftrer it become slow again from day to day. Every few days i do full Scan and Clean and it help a little bit (it become a bit faster , but not as it was the first time i did the first scan and then again after few hours it become slow again,
486 views
Jun 27, 2022 at 05:17 AM

full C drive

A problem with a small space on the C disk. How else to free up space on the C disk? Which program files can I transfer to an external disk and make win 10 work without problems?
744 views
Jun 26, 2022 at 11:23 PM

Проблемы с fps в играх

Здравствуйте, недавно начались проблемы с игровым ноутбуком, а именно низкие fps в играх, для сравнения, буквально месяц назад в игре counter strike global offencive было больше 200 fps, на данный момент выше 60 не поднимается ( проблема не в самой игре, в других тоже самое даже на низких настройках ) Ноутбуку год. Пересмотрев множество видео с вариантами решения проблемы, все равно не повышается качество игры. Уже и очистку, и сканирование делала с помощью вашей программы, все равно не выходит. Пытаюсь также драйвера обновить. Подскажите, пожалуйста, что нужно сделать.
887 views
Jun 26, 2022 at 06:55 PM

Ошибка при обновлении "Google Chrome"

Здравствуйте, подскажите, пожалуйста, как устранить ошибку при обновлении браузера "Google Chrome" без его переустановки?
947 views
Jun 26, 2022 at 01:26 PM

sleep mode

How do I disable sleep mode?
795 views
Jun 25, 2022 at 05:51 PM

HP x2 210 G2 Detachable PC - Specifications

Hello!

My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD

Running WIndows Home

Is there a list of windows services that I can disable in order to get it as lean and functional as possible?

I bought it used and I cannot believe people find these devices functional at all.

Call it a summer project...
807 views
Jun 25, 2022 at 04:27 PM

DEFRAGMENTATION EINER SSD-FESTPLATTE

BoostSpeed12 bietet eine Defragmentierung auch für SSD-Festplatten an. Ist dies ratsam? Andere Computer-Experten raten davon ab!
745 views
Jun 24, 2022 at 02:31 PM

просмотр

доброе подскажите как мне бороться с экраном при просмотре любого видео и если на картинке приглушается яркость на экране как будто кто то просто отключает экран и это постоянно смотрю ли я фильм или смотрят ли мультики мои внуки
792 views
Jun 23, 2022 at 06:32 AM

F keys

None of my F keys are working. How do I fix this?
1068 views
Jun 22, 2022 at 03:23 AM

Computer shutting off

My computer has been randomly shutting off. I sent it to IT at school and they put a new battery and motherboard in but that hasn't fixed it, it rarley happens when I am at home, mostly when I am at school. How do I fix it?
548 views
Jun 20, 2022 at 04:53 AM

Auslogics BoostSpeed

КАК МОЖНО ОТКЛЮЧИТЬ ОБНОВЛЕНИЯ
806 views
Jun 19, 2022 at 06:10 AM

App error

This pops up on the system info, "application errors": Any fix for it?
Name, Value, Advanced
Application Error: Faulting application name: svchost.exe_FrameServer, version: 10.0.19041.1566, time stamp: 0x1f37eb46Faulting module name: RsProvider.dll, version: 1.30.0.0, time stamp: 0x57ee1a06Exception code: 0xc0000005Fault offset: 0x000000000007bd6dFaulting process id: 0x2300Faulting application start time: 0x01d883048cd13be0Faulting application path: C:\WINDOWS\System32\svchost.exeFaulting module path: C:\Program Files\Realtek\RsProviders\RsProvider.dllReport Id: ff0c9809-f014-46e1-8f75-b7775e36760aFaulting package full name: Faulting package-relative application ID: 6/18/2022 6:14:18 AM
737 views
Jun 18, 2022 at 11:41 AM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1528 views
Nov 24, 2020 at 02:38 AM

социальные сети

при общении в интернете мое изображение удваивается

1527 views
May 25, 2020 at 08:02 AM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1526 views
Jan 03, 2021 at 09:19 PM

Can't enter settings

Can't enter settings app. Stuck at icon

1526 views
May 22, 2020 at 06:05 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1525 views
Mar 25, 2021 at 01:02 PM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1524 views
May 23, 2020 at 09:39 AM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1523 views
Jul 07, 2020 at 04:16 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1522 views
Oct 27, 2020 at 09:03 AM

Won't allow install

I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.

1521 views
Nov 08, 2021 at 04:36 PM

Unused Applications - Application Logs

When doing an All Areas Scan the Disk Space never is 'Nothing Found' the result because the following files are always there:
C:\Windows\System32\SleepStudy\ScreenOn\ScreenOnPowerStudyTraceSession-2020 How can I delete, disable the folders of these files. I have gone in to the final files and deleted them, at least I think I have, but the early folders are still there and the Application Logs appear again. How do I get rid of or disable these folders? Thanks!
1520 views
Jul 20, 2020 at 01:40 AM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1520 views
May 12, 2020 at 08:28 AM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1520 views
Aug 17, 2020 at 09:27 AM

Luminosity disappeared

Hello, i have problem, after install bootsped 11, i can't control luminosity because disappeared in central windows 10.
Best regards

1518 views
Sep 14, 2019 at 01:16 PM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1518 views
Dec 25, 2019 at 07:43 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1517 views
Mar 28, 2020 at 01:49 PM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1517 views
Sep 01, 2019 at 05:05 PM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1515 views
May 06, 2020 at 05:50 AM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1515 views
Nov 19, 2020 at 11:45 AM

Auslogics Driver Updater 1.23.0.2

Уже не первый раз встроенный антивирус Windows 10 "ругается" на программу, после чего удаляет DriverUpdaterHelper.dll, выдаёт код ошибки 0х0000007Е, и просит переустановить программу. А сейчас при попытке загрузки сетапа с вашего сайте пишет, что она содержит вредоносную программу. Пожалуйста, подскажите, как мне решить данную проблему, чтобы на будущее я с ней не сталкивался? Форма техподдержки непосредственно по вашим программам не работает ни через Мозиллу, ни через Хром, сообщения не отправляются, поэтому пишу здесь. Пожалуйста, сбросьте мой счётчик бесплатных вопросов.
1510 views
Apr 02, 2020 at 01:36 PM

My wireless driver is not working

This is the second time this has happened and it has something to do with this softwarre Auslogics 11 after a deep scan took place. But now I cant restore the driver because it seems to be blocked,
The diagnostic's say "Windows can not bind the IP protocol stack to the network."
This is with my wireless adapter and not with my LAN, But I need my wireless adapter asap. Yes I have tried reinstalling the driver and it says the same thing,

1510 views
Apr 15, 2020 at 03:02 PM