1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
MSEdge
Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
boostspeed
Pc still not operating smooth see no changes since using boost speed after two or three scans. maybe problem is windows or age of PC or Spectrum cable.
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
re windows 10 not updating from 1909 to 22H2.
Follow up on not being able to update to Windows 10 22H2 from 1909.
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
Windows Update
This error code might help: (0x80004002).
Can you guys help? Tried everything. I can't seem to fix this.
Can you guys help? Tried everything. I can't seem to fix this.
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
Accessing NAS from the web
¿How do I access my Buffalo Link Station LS220DB from the web in a secure way?
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Cursor locks up and I can't type
Sometimes my computer freezes and I have to wait awhile to type again. Is there a solution for this? This happens in Internet browsers and Microsoft Word.
Privacy Leaks
Boost Speed 13* has been sending me the message that I have "Potential privacy leaks detected - . . . . some Windows settings are enabled to share your private information"
How do I find the Windows settings and disable them?????
How do I find the Windows settings and disable them?????
Неизвестная музыка в наушниках
Когда сижу в наушниках в одном ухе тихо играет музыка. Пробовал закрывать все приложения, смотреть в микшере громкости - проблему не нашел. Прибавление звука системы звук музыки не прибавляет. Музыка явно не из моего плейлиста. Наушники подключены по проводу. Что это может быть и как это можно исправить?
installation logiciel
Bonjour, je n'arrive pas à installer un Logiciel , j'ai une erreur 1720 de windows installer
Computer shutting off
My computer has been randomly shutting off. I sent it to IT at school and they put a new battery and motherboard in but that hasn't fixed it, it rarley happens when I am at home, mostly when I am at school. How do I fix it?
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Vos logiciels
Quel utilité et quelle différence (avant de passer ma commande) entre Auslogics BoostSpeed13 et Discdefrag?
Je ne sais que choisir vraiment..
Je ne sais que choisir vraiment..
Laptop freezes on and off
Lenovo laptop freezes on and off. I have few apps open at the same time and I wfh these days. so I logged onto VDI to connect to my workspace. Can you remote login and help.