No se oye ningun sonido
установить андройд 13
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
boostspeed tray icon
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
DSN resolution failing
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
Критическая
Fortnite
Boostspeed Benachrichtigungsanzeigen
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Boostspeed 13 startup externalized to Windows desktop every boot
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Auslogics BoostSpeed が上手く使えません
the best way to free-up dwindling space on my diskdrive
USB
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
MAPPING USB PORTS TO COM PORTS
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Jabra Speak 710
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
license keys
Display and touchpad
внезапно стал плохой интернет
Screen Saver Retreval
RunDLL Error Messge keeps popping up
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
updates
i have updated the first driver in the list of drivers to be updated many times, why does it continue to on the list.
i update drivers 2 or 3 times a day but the list doesn't get any shorter,why.
Не понимаю куда девается память
Computer shuts down instead on going to sleep
Thank You
~Bill
No se oye el sonido
Hola. Llevo un par de meses en los que de golpe se corta la audicion de sonidos en mi ordenador (el testigo luminoso de mis altavoces desaparece como si éstos no tuviesen corriente eléctrica). También en la reproduccion musical. Normalmente el sonido desaparece (aunque visualmente - las lineas de volumen suben y bajan - y según información de configuración todo funciona correctamente) y vuelve a aparecer transcurridas unas horas. Estouy harto de desinstalar y volver a re-instalar el controlador. Hoy he ido un paso más allà reinstaurando sistema a un punto anterior en el tiempo. No se arregla. Aparentemente no es culpa del controlador. Todo apunta a que hay alguna aplicacion en mi ordenador que produce este efecto. O quizás esté demasiado saturado. En más de una ocasión se pierde el sonido justo después de un análisis efectuado por Auslogics BoostSpeed aunque este caso tampoco ocurre en el 100% de las veces que me quedo sin sonido. Cuando se va el sonido dura horas y cuando vuelve el sonido por sí mismo también recupera el sonido durante horas. ¿Pueden ayudarme a solucionar este molesto problema de una vez por todas?
Gracias
Change DNS
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons