1859 questions
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
lins aus newslettern u.ä. gehen nicht mher
Boostspeed scheint alle links aus nwslettern u.ä. deaktiviert zu haben - ich kann so nicht mehr arbeiten. Wie reparieren?
computer freezing a lot
I was having a lot of problems with programs and browsers closing, after I installed auslogic, it improved, but I was afraid of it being some deep virus, how can I know, I have the antivirus, but I still have my doubts, because the PC gave a improved, but you will know
Autodesk Software
i had installed Autodesk Software on my computer and it didnt install well due to licence patching. I unistalled the software and tried to reinstall but the software wouldnt install.
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
Lost MBR?
I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error. Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.
Optimización de la memotria Ram
Hola, me pueden ayudar a configurar la optimización de la memotria Ram de mi PC con BootSpeed 13?
Gracias
Gracias
Mon PC géle fige
BOnjour
Windows plante mantenant régulièrement, alors que cela n'arrivait jamais avant. Pourquoi ?
Windows plante mantenant régulièrement, alors que cela n'arrivait jamais avant. Pourquoi ?
transfer from pc windows7 to pc windows11
hi
can you tell me the quickest way to transfer all hard drive data from one pc to another
can you tell me the quickest way to transfer all hard drive data from one pc to another
Windows update crashes my computer
Windows update crashes my PC when I try to update it. It will start to download and fail at a certain point, around 7% DL. sometimes it will fully download, but will crash upon install. every time indicating it's rolling back to the previous version. I have Aura for VPN and anti-virus, but it never interfered before. This is now happening on 3 of my machines, and I'm at an absolute loss. The windows update troubleshooter also yields zero results.
Back Button Hijack?
Hello! Today my screen flickered and I couldn't use any browsers, I've tried chrome, firefox, edge, opera. It opens and when I try to click a link, it just goes back to the prevous screen. I can't even get your update from the link inthe app. it takes me to your site and when I click on update, it just does nothing. I can't do a search or click a bookmark.
I'm on windows 10 Pro.
I tried a system restore from your app and it failed with an error about the restore point was damaged.%programfiles%\windowsapps
AppxStaging.
So I tried it within windows. same errors.
I can't do anything that involves a browser.
I did a scan with malwarebytes, found nothing.
Not sure how to fix this.
I'm on windows 10 Pro.
I tried a system restore from your app and it failed with an error about the restore point was damaged.%programfiles%\windowsapps
AppxStaging.
So I tried it within windows. same errors.
I can't do anything that involves a browser.
I did a scan with malwarebytes, found nothing.
Not sure how to fix this.
emergency shutdown laptop
Добрый день, такая проблема: ноутбук экстренно выключается при работе в некоторых приложениях, не думаю что это из-за перегрева поскольку AIDA64 показывает температуру в пределах нормы. Какие ещё могут быть причины и способы их исправления?
Good afternoon, such a problem: the laptop turns off urgently when working in some applications, I don't think this is due to overheating, since AIDA64 shows the temperature within the normal range. What other reasons can there be and how to fix them?
Good afternoon, such a problem: the laptop turns off urgently when working in some applications, I don't think this is due to overheating, since AIDA64 shows the temperature within the normal range. What other reasons can there be and how to fix them?
Disabling a deleted App
Hello,
How do I disable and uninstall an already deleted app from my laptop? I made the mistake of deleting the app when I should have uninstalled it. I've followed every instruction from Youtube. I downloaded BoostSpeed and cleaned up some registry files with the app's name. The App's name is FineShare FineCam. It still appears on Chrome as a virtual camera option. The app does not appear under ''Uninstall Manager''.
How do I disable and uninstall an already deleted app from my laptop? I made the mistake of deleting the app when I should have uninstalled it. I've followed every instruction from Youtube. I downloaded BoostSpeed and cleaned up some registry files with the app's name. The App's name is FineShare FineCam. It still appears on Chrome as a virtual camera option. The app does not appear under ''Uninstall Manager''.
Microsoft programs not responding
How do I fix Microsoft not responding error? this applies to any MS program I open eg Excel, Word, Edge etc. I have tried many different suggestions from the web. What I really need is a definitive answer.
Какой лучше в этой линейке адаптеров
Какой лучше в этой линейке адаптеров. Качество-производительность