1870 questions
внезапно стал плохой интернет
у меня был нормальный интернет всё было хорошо но на след день он просел до 100кб загрузка хотя на спидтесте он как был по 80мб так и остался и уже месяц он такой до сих пор а что делать я не знаю
license keys
If I were to buy the 3-pack of license keys, would I be able to use them over the course of three years? It says "1 year, 3 keys", but I don't know if they each expire a year after purchase or if they expire a year after they are used. For example, if I bought the keys, would I be able to use one key every year, using the three keys over the course of three years, or would I have to buy another 3-pack every year?
folders
everytime i Click ON ONE FOLDER tO OPEN All OTHER FoldERS are activatED. thE uSUAl ANSWER oN GOOGLE iNVOLVING EXPLORER FILE OPTIONS DOES NOT WORK. also as you can see the shift key doesn't work
Touchpad Stopped Working
Can you give me possible solution methods to get my Lenovo Yoga laptop (Win 10) touchpad to start working again? I am currently using a bluetooth connected mouse with my laptop, but "out of the blue" my touchpad stopped operating. I've had this issue happen before and a re-boot corrected the issue, but not this time. Thanks.
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
laptop is shutting down 30 sec
Hello
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
ICカードリーダーが使えない
Smart Card Device Enumeration Serviceが「停止中…」と表示され、ICカードリーダー使用できない。ICカードリーダー自体はデバイスマネージャーで「CIR215 PICC」と表示され、「正常に動作しています」の状態です。コマンドラインからtaskkillで強制終了して再実行をしても、すぐに停止中でフリーズしてしまいます。
no moving
hi,
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
Jabra Speak 710
I have a Jabra Speak 710, connected through a Jabra Link 380 bluetooth device.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
レスポンスが遅くなった
動作がいちいち遅くなって困っています。何を調べればよろしいのか教えてください。
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか?
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか?
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
Recovering Deleted Files
How do I recover my delted One Drive files that were deleted when I upograded to Pro Vestion 13
Ok Its not Store but Log in Activity..
Ok ..so Ill just tell my problem: I started getting unsuccessful access tries constantly for mm a year ,it wassnt like that before, and i dont know from where or why.. my Mobile? But some are from Firefox and i dont have it anywhere anymore Have you seen something like this before? I have a picture ..screenshot
You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
Thank you far any insight.. Regards, Mitja
You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
Thank you far any insight.. Regards, Mitja
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
EL PROGRAMA TIENE ALGUNA FUNCION PARA DEJAR WIN 11 COMO ESTABA POR DEFECTO
TODAS LAS TAREAS PRIMARIAS Y SECUNDARIAS, ETC... HAY ALGUNA FORMA DE DEJARLO COMO VIENE WINDOWS 11 POR DEFECTO
Неизвестная музыка в наушниках
Когда сижу в наушниках в одном ухе тихо играет музыка. Пробовал закрывать все приложения, смотреть в микшере громкости - проблему не нашел. Прибавление звука системы звук музыки не прибавляет. Музыка явно не из моего плейлиста. Наушники подключены по проводу. Что это может быть и как это можно исправить?
help requested
What can i do if I get message : high system resource usage detected. My computer is extremly slow and only became so over last 3 months.
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
Roaming Folder
I have 70 GB of data on my c:/user/AppData/Roaming folder. I have a space issue because my Win11 OS is insalled on a M.2 SSD drive with 120GB. I've moved the My Documents folders to a standard 2TB drive and told windows to install all apps on the large drive. I would like to keep the OS boot disk limited to windows only and make my boot quick!
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Windows Blickpunkt-Bilder
Nach BoosSpeed12 wechseln die Windows 10 Blickpunkt-Bilder nicht mehr und muß von mir manuell repariert werden. Welche Einstellungen können das verhindern?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
Postgrest SQL_Службы Microsoft
Добрый день!
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Проблема с HDD диском
Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?
laptop acer aspire 5735Z
after I ran bootspeed and tutorals 1-4 my laptop will not shutdown it starts to close then boots to sign in page only way i can shut down is to remove battery it han never done this before now hope you can help me with this problem
thx Sean
thx Sean
Question about conflict with avanced programs
Hi, i have installed in my notebook windows 10 home some avanced programs, my question is... if i install Auslogics Boostspeed 11, what configuration i need to make? I dont like to have problems with this avanced aplications
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Oracle database 11g server (Have service running)
Oracle Virtual Box (Have service running)
VMWare workstation player (Have service running)
Informatica power center 9.6.1(Have service running)
SQL managment studio 18 (Have service running)
SQL Server 2019 (Have service running)
Microsoft azure (Have service running)
Visual Studio 19 (Have some service running)
Power BI (Have service running)
Microsoft machine learning Server (Have service running)
My notebook is HP AMD Raizer 7 3700U with 12 Gb Memoy and 2 TB hard disk with windows 10 64 bits
Malware
Does your program detect Malware? I have been getting the blue screen of death and the reason listed is
System Service Exception
What failed: Dot 4 sys
System Service Exception
What failed: Dot 4 sys
Duda
Estimados amigos:
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
Auslogics Boostspeed 13 TRIMMING SSD Hang at 3% unable to complete SSD Optimization
When running Disk Defrag Optimization Auslogics Boostspeed 13 Pro hangs at 3% "Preparing" when running TRIMM on external SSD and creates a file on external SSD with the following each time Optimization is run:
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.
Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.
Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
System Booting
When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.