settings
1. The Window keyboard key does not work when pressed or clicke on.
2. Entering the command setting on the window search bar gets me to window settings, but clicking on System will notopen it and hangs the whole Setting menu.
3. The usb microphone is recognized when plugged in the usb but it's not working.
Scanners ignore folders configured to skip in Preferences
bluetooth dissapeared from device manager after cleanup
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.
Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.
Kind regards.
Perry Parengkuan
c:\windows\servicing\LCU\* - no cleanup
I would like to ask why BootSpeed not have option to perform cleanup of the c:\windows\servicing\LCU\* files?
Реестр
Windows Update
Can you guys help? Tried everything. I can't seem to fix this.
バージョン 13.0.0.4から
アップデートの操作をするのですが何回やっても
13.0.0.6には到達できません、Windowsのアンイストールの操作をして
再セットアップをしても変化は有りません対処の方法は・・・・・・・
Getting different kinds of BSOD's
Thank you in advance for your time,
Pedro
Diagnostic Policy Service Cannot Start.
What does this DOS/DSS commandline Window temporarily at bootup mean?
Auslogics BoostSpeed 13のアップデート
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
Windows Search getting turned off
Buster turns it off constantly, so I need to reset the setting again and again and again.
How do I stop Buster from turning off my Windows search setting?
Please advise.
Thank you.
Development of tools to repair this common issue
Any thoughts would be appreciated.
PS love the product.
No se oye el sonido
Hola. Llevo un par de meses en los que de golpe se corta la audicion de sonidos en mi ordenador (el testigo luminoso de mis altavoces desaparece como si éstos no tuviesen corriente eléctrica). También en la reproduccion musical. Normalmente el sonido desaparece (aunque visualmente - las lineas de volumen suben y bajan - y según información de configuración todo funciona correctamente) y vuelve a aparecer transcurridas unas horas. Estouy harto de desinstalar y volver a re-instalar el controlador. Hoy he ido un paso más allà reinstaurando sistema a un punto anterior en el tiempo. No se arregla. Aparentemente no es culpa del controlador. Todo apunta a que hay alguna aplicacion en mi ordenador que produce este efecto. O quizás esté demasiado saturado. En más de una ocasión se pierde el sonido justo después de un análisis efectuado por Auslogics BoostSpeed aunque este caso tampoco ocurre en el 100% de las veces que me quedo sin sonido. Cuando se va el sonido dura horas y cuando vuelve el sonido por sí mismo también recupera el sonido durante horas. ¿Pueden ayudarme a solucionar este molesto problema de una vez por todas?
Gracias
No se oye ningun sonido
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
Система
Microsoft Storeが 無くなってしまいました。
BoostSpeed11を インストール後 設定 操作してみた所 Storが グレー表示になり アクセス出来なくなりました。
レスキュ-から 回復を試みましたが 復旧出来ない状態です。
Unwanted sound
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
windows update slows startups
Windows 10 Update Error Code 0x80070bc9
Do you have a tool to address this and repair Windows Update software or whatever is wrong?
My system repair data
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
Update
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
pc unplugged ac adapter pc shuts down with battery charged at high percentage
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
Stop code issues
My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.
Please help.
Thanking you in advance,
Coach Rod
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>