910 questions

PC Crashing/Freezing

To Whom It May Concern,

In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.

When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.

The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:

https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data

Any advice, recommendations or support you an afford me would be very much appreciated.

I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.

Kind regards to you and your colleagues at Auslogics

Ian

Ian Willsher
1379 views
Nov 03, 2020 at 11:11 PM

Video issues

Hi There,
I can be happily working along, and if I need to see a video file, I can... but then, sometimes it stops, and I cannot make the video work again.
I have Driver Updater, but if I reboot the computer, the video function will work again.
Sometimes, if I run a BoostSpeed scan, the video might work again. It can still stop again, but if I Boost Speed again, it may not make the video run again.
So I have to reboot again instead, which is pretty time consuming.
My initial thought is I'm missing video drivers, but i have Driver Updater.
Can you advise and help me?
1338 views
Nov 03, 2020 at 06:14 AM

Wana know how to change additional calendar

hello there , how to change additional calendar for windows 10 ? i need to change this chinese additional to persian (iran) ,, thxxxx

1132 views
Oct 30, 2020 at 11:55 AM

Windows Blue Screens

Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?

1089 views
Oct 29, 2020 at 01:37 PM

Duplicated Folder

Hello,

My name is Eric Borges and I am having an issue that when I update my windows 10 it's duplicating the windows folder in my C:, (follow attached). I've try to delete in many ways and even tho with the Auslogics app is not working, it's saying that the folder is deleted, but it's not. Is there any way to remove it permanently?

Best.
1477 views
Oct 27, 2020 at 07:40 PM

exploler.exe ошибка приложения сервиса

ПОДСКАЖИТЕ ЧТО ДЕЛАТЬ я очистил ненужные папки в как вдео иображения музыка перезагрузил ноутбук октрываю проводник жду секунд 10 пишет exploler.exe ошибка сервиса преложения и так каждый файл по типу панели инструментов скажите что делать пожалуйста а то меня мама убьет елси узнает она просто инода заходит в мой ноут и бдет спрашиват что уже бл такое и все пипец мене скажите прошу вас переустановка я оюсь делать это или мне надо вызывать мастера , еще я смотрле в инете что там водишь команду srw /scannow пошло до 84 процента сморю пишут показало есть неисправеные файлы исправил некоторые неисправились перезгрузили комп или ноутбук и появился синий экран оно дошло у меня до 84% и я остановил и я сейчас НЕЗНАЮ ЧТО ДЕЛАТЬ СКАЖТЕ ПОЖАЛУЙСТА ЧТО ДЕЛАТЬ ПРОШУУУ ВАС ОТ ВСЕГО СЕРДЦА
НО СЛИ ВЫБИРАЮ ЛЮЮ\БОЙ ФАЙЛ В ВАШЕМ ПРИЛОЖЕНИЕ ВСЕ ОК ЧТО ДЕЛАТЬ Я ВЫДЕЛЮ ЛЮБОЕ ХОРОШО Я ПРОСТО ХОЧУ ЧТОБ ВЫ ЭТО УВИДЕЛИ

1118 views
Oct 27, 2020 at 11:59 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1423 views
Oct 27, 2020 at 09:03 AM

A little advice before running this feature

I am not having any windows 10 problems but am a little concerned about your optimization feature to remove outdated windows files. In my case there are 43.16 GB or 28,000 items indicated that could be cleared. The warning is that after this some files may have to be downloaded from Microsoft. Is this amount of files typical. My system has had Windows 7 on up so maybe this would help but there are so many of these files I dont want to crash my system. Any tips or advice on this would be appreciated

Mark
1144 views
Oct 27, 2020 at 03:49 AM

Turn indexing back on

Hello! Bootspeed disabled indexing. How do I enable it back?
1263 views
Oct 26, 2020 at 03:26 PM

RDP keeps disabling on every machine that has boostspeed installed

I have my own domain with a virtual environment as well as several physical endpoints (mostly laptops). None of the virtual machines have boostpseed installed, only the majority of the physical machines. I have RDP enabled by group policy.

I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.

After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.

I found this post
https://qa.auslogics.com/question/225

And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
1319 views
Oct 26, 2020 at 01:20 PM

key product W10PRO missed

Hi, I have AuslogicsBoostSpeed ​​11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex

1181 views
Oct 25, 2020 at 05:01 PM

Напортачил...

Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.

Как вернуть положение по умолчанию???
997 views
Oct 25, 2020 at 11:38 AM

ask

i have licence for home version
and i install pro version
how can i back to home v
1058 views
Oct 23, 2020 at 04:28 PM

WIndows Security closes when opened

Hi I'm Raffy and a New member of the Auslogics

When I open Windows Security Application it closes immediately

how do I fix it

1083 views
Oct 22, 2020 at 01:19 PM

PROVING

How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
1034 views
Oct 22, 2020 at 01:46 AM

立ち上がり時間が掛かるようになった事への質問

当初起動時間が15秒程度でしたが、今は40秒程度掛からないとwindowsが立ち上がらなくなっています。立ち上がりの時間短縮の方法は、ありますか?
1122 views
Oct 20, 2020 at 06:43 AM

Dudas

¿Qué hacer si mi windows se traba?
¿Qué hacer si mi windows tarda mucho en apagar y reiniciar?

762 views
Oct 19, 2020 at 05:28 PM

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

1372 views
Oct 14, 2020 at 03:43 PM

unidentified files following upgrade to Win 10 version 2004 prevent defragmentation

I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".

This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.

I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.

Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?

thanks / Adrian
798 views
Oct 09, 2020 at 06:24 PM

Desktop

I have lost my icons on the desktop!
1028 views
Oct 08, 2020 at 02:28 AM

I would like to cleanup my windows pc

How can I do Empty File delete without destroying my Document files???
1173 views
Jan 15, 2021 at 04:14 AM

Stop code issues

Dear Sir or Madame,

My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.

Please help.

Thanking you in advance,

Coach Rod
1171 views
Nov 16, 2019 at 07:27 PM

how do I get it back on again?

after running Boostpeed the first time I realized it turned off cortana perminently. when I went to turnit back on. it won't let me. is there a way to reverse Boostspeed Windows tweaks?
1170 views
Dec 11, 2020 at 02:25 PM

Update windows

I can't update windows on my windows vista machine. Every answer will be estimated.Thank you!
1170 views
May 26, 2020 at 06:24 PM

Lock-screeen blury

Hello!
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
1169 views
Oct 05, 2020 at 09:43 AM

Camera and Microphone

How do I unlock my camera and microphone?
1169 views
Dec 23, 2020 at 08:38 PM

error code 0xc00000e5

Can I fix this error in your program, or do I seek help elsewhere?

1167 views
Dec 21, 2020 at 08:12 PM

Пропала регулировка яркости

Добрый день. Полностью пропала регулировка яркости после обслуживания через эту программу. Сочитание клавиш FN + яркость не работают. Ползунков нигде нет.

1167 views
May 08, 2020 at 08:52 PM

Security Center in Vista

I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?

1164 views
Jun 06, 2020 at 09:43 PM

Auslogics 12 Downloading

I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.
1163 views
Jan 21, 2021 at 12:04 AM

Internet explorer

I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.

1160 views
Jul 15, 2020 at 07:27 PM

lock screen password

how can i return my window lock screen password
1160 views
Aug 03, 2020 at 10:12 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP

I work from home of course and my Lenovo is running extremely slow and making noise like it is trying to complete an update. I do have one update 2021-05 Cumulative Update for Windows 10 Version 20H2 for x86-based Systems (KB5003173) that everytime I try to install it is errors out. I have received two different error codes (0x8007007e), I ran the windows trouble shooter, and now I am receiving error code (0x8000ffff). I downloaded your Auslogics and did a full scan for all the free options you offer and still am receiving this error message and my PC is super slow
1154 views
May 12, 2021 at 08:22 PM

Location in Privacy setting

I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You
1150 views
Dec 27, 2020 at 06:48 AM

DPI

What is normal DPI

1147 views
Oct 25, 2019 at 04:25 PM

Windows Search Repeatedly Becoming Disabled

I am running Windows 10. The Windows Search service repeatedly becomes disabled, and I suspect that the cause is something within the Auslogics BoostSpeed 12 program. I am able to restart it by entering services in the search bar, choosing Automatic (or Manual) and then restarting the service. However, is there a toggle within your program that would previent this recurring issue?

Clifford Sweet
San Diego, California
1146 views
Oct 18, 2021 at 11:04 AM

Location Service

Hi,

I want to turn on Location services so that my display automatically dims and cuts out blue light when the sun sets. However when I go to 'Night Light Settings' and then under 'Schedule' access 'Location Settings' I am informed that "Some of these settings are hidden or managed by your organisation" and the 'Change' button is disabled.

What Organisation? This is my personal desktop not managed by anyone but me.

Pleas could you help with this issue.

Thanks
Jeff
1146 views
Jan 05, 2021 at 05:13 PM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

Windows Search Engine

How do i enable the Windows Search Engine?
1145 views
Jan 09, 2021 at 06:46 PM