910 questions

PC Crashing/Freezing

To Whom It May Concern,

In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.

When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.

The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:

https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data

Any advice, recommendations or support you an afford me would be very much appreciated.

I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.

Kind regards to you and your colleagues at Auslogics

Ian

Ian Willsher
1379 views
Nov 03, 2020 at 11:11 PM

Video issues

Hi There,
I can be happily working along, and if I need to see a video file, I can... but then, sometimes it stops, and I cannot make the video work again.
I have Driver Updater, but if I reboot the computer, the video function will work again.
Sometimes, if I run a BoostSpeed scan, the video might work again. It can still stop again, but if I Boost Speed again, it may not make the video run again.
So I have to reboot again instead, which is pretty time consuming.
My initial thought is I'm missing video drivers, but i have Driver Updater.
Can you advise and help me?
1338 views
Nov 03, 2020 at 06:14 AM

Wana know how to change additional calendar

hello there , how to change additional calendar for windows 10 ? i need to change this chinese additional to persian (iran) ,, thxxxx

1132 views
Oct 30, 2020 at 11:55 AM

Windows Blue Screens

Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?

1089 views
Oct 29, 2020 at 01:37 PM

Duplicated Folder

Hello,

My name is Eric Borges and I am having an issue that when I update my windows 10 it's duplicating the windows folder in my C:, (follow attached). I've try to delete in many ways and even tho with the Auslogics app is not working, it's saying that the folder is deleted, but it's not. Is there any way to remove it permanently?

Best.
1477 views
Oct 27, 2020 at 07:40 PM

exploler.exe ошибка приложения сервиса

ПОДСКАЖИТЕ ЧТО ДЕЛАТЬ я очистил ненужные папки в как вдео иображения музыка перезагрузил ноутбук октрываю проводник жду секунд 10 пишет exploler.exe ошибка сервиса преложения и так каждый файл по типу панели инструментов скажите что делать пожалуйста а то меня мама убьет елси узнает она просто инода заходит в мой ноут и бдет спрашиват что уже бл такое и все пипец мене скажите прошу вас переустановка я оюсь делать это или мне надо вызывать мастера , еще я смотрле в инете что там водишь команду srw /scannow пошло до 84 процента сморю пишут показало есть неисправеные файлы исправил некоторые неисправились перезгрузили комп или ноутбук и появился синий экран оно дошло у меня до 84% и я остановил и я сейчас НЕЗНАЮ ЧТО ДЕЛАТЬ СКАЖТЕ ПОЖАЛУЙСТА ЧТО ДЕЛАТЬ ПРОШУУУ ВАС ОТ ВСЕГО СЕРДЦА
НО СЛИ ВЫБИРАЮ ЛЮЮ\БОЙ ФАЙЛ В ВАШЕМ ПРИЛОЖЕНИЕ ВСЕ ОК ЧТО ДЕЛАТЬ Я ВЫДЕЛЮ ЛЮБОЕ ХОРОШО Я ПРОСТО ХОЧУ ЧТОБ ВЫ ЭТО УВИДЕЛИ

1119 views
Oct 27, 2020 at 11:59 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1423 views
Oct 27, 2020 at 09:03 AM

A little advice before running this feature

I am not having any windows 10 problems but am a little concerned about your optimization feature to remove outdated windows files. In my case there are 43.16 GB or 28,000 items indicated that could be cleared. The warning is that after this some files may have to be downloaded from Microsoft. Is this amount of files typical. My system has had Windows 7 on up so maybe this would help but there are so many of these files I dont want to crash my system. Any tips or advice on this would be appreciated

Mark
1144 views
Oct 27, 2020 at 03:49 AM

Turn indexing back on

Hello! Bootspeed disabled indexing. How do I enable it back?
1263 views
Oct 26, 2020 at 03:26 PM

RDP keeps disabling on every machine that has boostspeed installed

I have my own domain with a virtual environment as well as several physical endpoints (mostly laptops). None of the virtual machines have boostpseed installed, only the majority of the physical machines. I have RDP enabled by group policy.

I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.

After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.

I found this post
https://qa.auslogics.com/question/225

And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
1319 views
Oct 26, 2020 at 01:20 PM

key product W10PRO missed

Hi, I have AuslogicsBoostSpeed ​​11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex

1183 views
Oct 25, 2020 at 05:01 PM

Напортачил...

Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.

Как вернуть положение по умолчанию???
997 views
Oct 25, 2020 at 11:38 AM

ask

i have licence for home version
and i install pro version
how can i back to home v
1058 views
Oct 23, 2020 at 04:28 PM

WIndows Security closes when opened

Hi I'm Raffy and a New member of the Auslogics

When I open Windows Security Application it closes immediately

how do I fix it

1083 views
Oct 22, 2020 at 01:19 PM

PROVING

How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
1035 views
Oct 22, 2020 at 01:46 AM

立ち上がり時間が掛かるようになった事への質問

当初起動時間が15秒程度でしたが、今は40秒程度掛からないとwindowsが立ち上がらなくなっています。立ち上がりの時間短縮の方法は、ありますか?
1122 views
Oct 20, 2020 at 06:43 AM

Dudas

¿Qué hacer si mi windows se traba?
¿Qué hacer si mi windows tarda mucho en apagar y reiniciar?

762 views
Oct 19, 2020 at 05:28 PM

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

1372 views
Oct 14, 2020 at 03:43 PM

unidentified files following upgrade to Win 10 version 2004 prevent defragmentation

I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".

This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.

I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.

Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?

thanks / Adrian
798 views
Oct 09, 2020 at 06:24 PM

Desktop

I have lost my icons on the desktop!
1028 views
Oct 08, 2020 at 02:28 AM

Windows Update, something went wrong

My sytem is no longer doing its windows updates, it always displays an error saying " something went wrong Try to reopen settings later"
760 views
Jan 18, 2022 at 11:44 PM

Unable to activate Auslogics Bootspeed 12 PRO Version

I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
759 views
Jan 26, 2022 at 12:46 PM

Task Manager

Hi. I keep getting a report from Auslogics that a "High System Resources aare deteded". Clicking to see more takes me to the tak manager - but I have nno idea which of the dozens of running programss aare essential/nexcessary/vital and which are causing the problem. Can youo give me some guidance?
Donald
758 views
Nov 23, 2021 at 10:18 AM

Parallels Desktop 18 Compatibility

I have an Apple iMac running macOS Monterey v12.4 with Parallels Desktop 18 and Windows 10.
I’d like to know, can BoostSpeed 12 run in this Virtual Machine environment without any issues?

PS: BoostSpeed 12 is not installed in the Virtual Machine environment yet. I’m simply trying to find out if it has been tested and will work before installing it on my iMac with Parallels Desktop 18.
756 views
Aug 12, 2022 at 03:52 AM

Boost Speed 12

Hi Guys

Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..

Tom
754 views
Jan 22, 2022 at 04:52 PM

num lock

my num lock keys does not wotk after first scan. Windows tell that I switch between num lock activate and deactivate but the number keys stays inactive. my keyboard is a logitech CRAFT and it works on a different pc.
753 views
May 29, 2022 at 09:59 AM

Cleaning

Gentlemen,
I have Windows 10 64 bit. I have 1.69 TB free space of 1.81 TB. Do you think I should wipe the free space or would it just be a waste of time?

Doug.
752 views
Aug 19, 2022 at 06:51 PM

No photo thumbnails

All my picture files used to disply thumbnails, now just icons.
How do I restore?
747 views
Nov 22, 2021 at 08:40 PM

Windows refusing access as administrator

Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
746 views
Jan 26, 2022 at 09:34 AM

Вопрос об ошибке при внезапном отключении

Доброго времени суток, уважаемые специалисты!

Спасибо за возможность задать Вам вопрос.

В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.

Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?

С уважением, Ана
744 views
Oct 20, 2021 at 08:44 PM

Problems with Windows Update-Valentin Batalak

Hello,
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Regards,
Valentin Batalak
741 views
Apr 07, 2022 at 07:15 AM

Очистка диска

Как и что лучше всего почистить системный диск. Уже занято более 100ГБ. Все документы/временные файлы/загрузки уже перенесены с диска.
741 views
Nov 20, 2021 at 02:05 PM

Malwarebytes

How do I avoid the manual suspension of Malwarebytes that does not allow Auslogics software to install due to identfying it as a PUP?
736 views
Jul 10, 2022 at 12:01 AM

Windows 10 Default System font changed


Hi,

After running all the Auslogics BoostSpeed 12 suggestions, the default system font changed into a horrible blurry type of text. This is across the whole system, including File Explorer, Chrome, Microsoft 365 Office apps (Excel, Word, etc), basically everywhere!

I've attached a screenshot from Chrome to illustrate what the default font looks like now.

How do I restore the original default system font?

Thanks and regards
Andrew

735 views
Oct 12, 2021 at 01:09 PM

CD|DVD-RW

Дисковод не хоче бачити диски,хоча ссистема дисковод бачть ы визначаэ що працюэ нормально
733 views
May 16, 2023 at 03:57 AM

Does disappear language icon ?

Tell me how to retrieve language icon it switches different typewritings?
731 views
Jun 16, 2022 at 01:21 AM

transferring data and Auslogics

Hi. This may be out of your field, but...

I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.

In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.

I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.

Onward,
Will Anderson
greenvegans.org

730 views
Apr 12, 2022 at 08:41 PM

Empty Folder Cleaner and Windows

Does the Empty Folders Cleaner differentiate which folders should and should not be deleted in the Windows OC? The tool identifies hundreds in my C drive, and I assume those in the Windows' System, Program Files, Windows32, etc. should NOT be deleted, but I can't tell.
728 views
Dec 26, 2022 at 05:01 PM

aidez-moi à installer Windows11 à partir de Winsdows10

Nom de l'appareil Asus-N732V
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
726 views
Jul 25, 2022 at 09:22 AM