after using auslogics it says disk has errors . CAN THIS BE FIXED WITH AUSLOGICS

I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate

Confused.

Simon F

Hello,

Potential new customer here.

My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.

Any ideas?

Thanks

Hi

Cool software and company. Thanks for your time.

Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.

Thanks again.

Since I did the clean up on my computer I can not print. It is a network printer and the IP guy said the connection is good but something is blocking my computer from seeing the printer and communicating with it.

All your product/services come as individuals and yet the best features are the one recommending one another. My question is, Why don't you make a Premium Product that covers at least three or four at best of those top rated/recommended softwares into one individual "Auslogics Armored AI" or something like that?

Reason I'm asking this, I'm broke.

can i put bootspeed on my cell phone

I keep losing the wifi connection while I am online. The Windows troubleshooter states the wireless network adapter has to be reset--which is does and the wifi works again...temporarily. Then it cuts out again and I go through the same drill, over and over.

What is messing with the WNA? No other device in my house using the wifi has this problem. Only my laptop I am using now.

Thanks...Shane Ostrom

hard disk crash...reloaded win10 not from backup
reload drivers multiple time
computer works
no sound
hp pavillion/i7gen10/b&o sound/nvidia

ПОсле установки программы и первоначального сканирования программа запроила перезагрузку. ПОсле перезагрузки сигнал от микрофона пропал. Ни приложения, ни само ОС не может получить от него сигнал. Хотя при поиске проблем через настройки ничего не обнаруживается.

I have Lenovo Yoga C940-15IRH and the touchpad does not work
It worked with windows 10.Now in Windows 11 nothing work.
I tried to uninstall the driver and to update Windows. does not work
Thanks a lot
Moti

I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?

I connected the Speaker JBL Flip5 to the Bluetooth and it is written in the setup of Windows 10 - Connected
I go to soundin Setup of Windos 10 to switch to JBL Flip 5 and it is does not appear.
So I can not use the JBL Speaker
Thanks a lot
Dr. Moti Leibowitz

WHY DOES IT SAY I HAVE A LEAST 1.9 TB

Hello
I conntected with Bluetooth the device - Speaker JBL Flip 5 (bluetooth connection only). It appear in the the Setting / bluetooth Devices of Windows 10

But in the setting of Windows 10 the device does not appear so I can not use it.

You gave me for the same quesion an answer for old windows (8) and for headset. I donot have Playback in the setting...

I tried to replace the driver, to update my windows 10 and restart,....It does not help

I'll be glad to have the right solution

thanks Dr. moti Leibowitz

After updating 26 drivers on my lenovo ideapad it now fails to start and will not even go into safe mode, cant do automatic repair or anything. help, not this pc!

i have bought a dell AIO recently wuth i3, 8 B RAM and 1 TB HDD. i find it sluggish. What hardware changes i must do to make it more resposnsive ? Should i install 256 B SSD or additional RAM or both

My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.

При подключении ASMT USB 3.0 Destop H SCSI Disk Device система то видит его, то нет: предлагает отформатировать или обновить драйвер (обновила драйвер тома файловой системы WPD). Как сделать этот диск рабочим не отключая его от ПК (каждый раз монтировать и размонтировать...)?

! не видела данного устройства в выпадающем меню, выбрала другое...

Bom dia,
Tenho uma unidade SSD externa que não esá sendo reconhecida pelo gerenciador de arquivos e nem pelo gerenciador de discos mesmo tendo feito os procedimentos básicos.