HP Envy Desktop 23 No audio devices after windows 10 update
Potential new customer here.
My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.
Any ideas?
Thanks
How to upgrade a graphics card
My graphics performance is at 5.1 and the average sytem performance is 7.5.
How do I upgrade my graphics card?
no sound/no f6 light for no sound
reload drivers multiple time
computer works
no sound
hp pavillion/i7gen10/b&o sound/nvidia
come fare puòizia nella sezione servizi
Voice recognition does not work
inaccessible boot device
Laptop freezes on and off
The JBL connected with Bluetooth Properly where in the sound output of windows 10 it does not appear
I conntected with Bluetooth the device - Speaker JBL Flip 5 (bluetooth connection only). It appear in the the Setting / bluetooth Devices of Windows 10
But in the setting of Windows 10 the device does not appear so I can not use it.
You gave me for the same quesion an answer for old windows (8) and for headset. I donot have Playback in the setting...
I tried to replace the driver, to update my windows 10 and restart,....It does not help
I'll be glad to have the right solution
thanks Dr. moti Leibowitz
disk defrag
Connected to Bluetoothe Cannot see in the Sound of Windows 10
I go to soundin Setup of Windos 10 to switch to JBL Flip 5 and it is does not appear.
So I can not use the JBL Speaker
Thanks a lot
Dr. Moti Leibowitz
Extremely Slow
パソコンが熱い
How Come....?
Постоянно отключается Wi-Fi
computer very slow
It has Windows 10 HOME, 1995Mhz CPU, 4GB RAM, 700GB HDD.
I have installed the Auslogics programs and used the scans a few times.
WHat is the most effective thing Ican do to speed up this computer ?
( not including replacing it! )
Can not print
Não reconhecimento pelo sistema.
Tenho uma unidade SSD externa que não esá sendo reconhecida pelo gerenciador de arquivos e nem pelo gerenciador de discos mesmo tendo feito os procedimentos básicos.
transferring windows
Hello and thank you for your time,
I am having trouble with finding info relative to my specific situation. I own an Asus ROG Strix GL553VD with 16 GB ram and it came with the 1 TB HDD. Ive since upgraded it to a 500 GB SSD by WD Blue as of recetly Ive also added a 120 GB NVMe m.2 SSD and Id really like to be ablr to add my whole windows OS and boot from it to achieve faster results plus Ive heard its less stress on your main drive. I recently tried copying the windows folder to it (and all 26 or so GB that it held) onto the new SSD and that obv didnt work. I have AOMEI partition pro and back upper but my Windows OS isnt on its own partition on C drive and Im finding nothing about migrating just those files or how to create a partition of just those files and I see nothing about migrating from SSD to a different SSD. Thank you for your time and potential help!
Add on Hardware recommendation
I'm thinking about installing "xtra PC" to rev up my Desktop. Does it really work?
If not, does boostspeed have a way of identifying bloatware?
Thank you!
I2C
What can you tell me about I2C This device cannot start. (Code 10).
I have tried many fixes with no success.
This is the Touch Screen driver in an HP Envy 360.
Thanks.
George Jamison
Windows 10 Disc Optimizer
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
fed up with lack of space on C Drive...what am I doing wrong?
I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry
100% disk usage
hi there, i am having a issue with my disk usage, my disk usage is at 100% a lot of the time when nothing is showing up in task manager as far as usage, any help on this issue would be greatly appreciated,
kind regards
pete
disk
New for this past week: upon boot up, before opening, screen gives me option of "checking disk" before start up. If I choose not to, I'm to press any keyboard letter within 8 seconds. When I reject option by pressing letter, message disappears and computer opens normally. I've done all the disk checks and cleaning multiple times.
What's this all about?
Thanks, Mark
Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1.
Дисплей телевизора, (подключенного кабелем чрез USB-входа и выхода, к ноутбуку) не "узнаёт" своего "коллегу" = ДИСПЛЕЯ №1. При "активации_соединения" телевизор "говорит", что не находит ЭТО_УСТРОЙСТВО = называемое "ноутбуком" = то-есть = DESKTOP-G71D1L .
Microphone not working
What happened?
And, more importantly, how do I fix it?
Sound just stopped again
I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?
ssd external defrag
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?
Thank you
Система пишет , что принтер не подключен
Wireless not working
Hi,
I ran a cleanup of the system yesterday and it siad it would enter a new driver for me. I said OK and now the wireless is not working. I have reinstalled all files that I thought may contain the information to no avail. What can I do to rsolve this?
Windows Key
My windows key on my keyboard does not work and I have tried to run different tasks in the task manager and several other things but nothing seems to work. I saw on your website that this program can help.
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
SSD Defrag Process
I use a Dell Latitude with an SSD drive. I note that some people recommended that the SSD should not be defragged as it can cause unnecessary wear and tear which will reduce its life span. Every time I run Boot speed it attempts to defrag the SSD. Two questions – (1) Does it really shorten the life of a SSD if it is defragged on a regular basis and (2) If I chose not to defrag how I stop this from happening other than every time manually untick the defrag box prior to hitting the “resolve all” button.
Many thanks in advance for your response.