300 questions
Missing Printer Driver in Device Manager
Hello-
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
Printer Interference
My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
graphics card
what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Cross mark on wifi symbol
This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have just purchased a USB-C Gigabit Ethernet Mini Adapter and I cannot connect to the internet with it. The device connects to my computer and is recognised, but it says "Unidentified Network" and underneath "No Network". My machine uses Windows 10. Can you help fix this problem?
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
Graphics Card
The results of the "Maintain" application suggested that I upgrade my card from 8.1 to 9.0 and above. How do I do this?
Диск содержит ошибки
При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
SSD Defrag Process
I use a Dell Latitude with an SSD drive. I note that some people recommended that the SSD should not be defragged as it can cause unnecessary wear and tear which will reduce its life span. Every time I run Boot speed it attempts to defrag the SSD. Two questions – (1) Does it really shorten the life of a SSD if it is defragged on a regular basis and (2) If I chose not to defrag how I stop this from happening other than every time manually untick the defrag box prior to hitting the “resolve all” button.
Many thanks in advance for your response.
Disengaged Microphone
I performed some of the scans and tweaks, which resulted in my system's microphone being disengaged. How can I re-engage the microphone that I need for my webinars.
Tastatur nicht Erkant
Windows 10 Bennent meiner Tastaturtreiber nicht richtig,dann Arbeitet Tastatur nicht mehr.
Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.
1. Почему программа начала дефрагментировать компъютер с диском SSD, хорошо ли это (вроде ему нужна только оптимизация), и если нет, как отключить дефрагментацию SSD ?
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
Speech Recognition in Word
Hi,
I am not able to set up Speech Regocntion or dictate.
What do I need to do? Keep getting language recognition dialogue although everything says it is set to English (UK).
Best,
Adrian
Disc Error
I have just reinstalled a new windows system to a new SSD HDD
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
Disfonctionnement imprimante
Bonjour,
Pourquoi après chaque mise à jour de votre produit, mon imrpimante ne fonctionne plus, je suis obligé de la désinstaller puis refaire une installation. ce qui du temps et de l'argent perdu. Si cela continu, je me verrai dans l'obligation de ma séparre de vos services.
Salutation.
Pourquoi après chaque mise à jour de votre produit, mon imrpimante ne fonctionne plus, je suis obligé de la désinstaller puis refaire une installation. ce qui du temps et de l'argent perdu. Si cela continu, je me verrai dans l'obligation de ma séparre de vos services.
Salutation.
блютуз гарнитура HONOR AM-61
Гарнитура сопряжается но не подключается к компьютеру, со смартфонам все работает
Computer slowness one in internet
I have your free version of BoostSpeed 12 running on an old PC whose features are:
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
problem after running resolve all issues early this morning
All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
WiFi keeps disconnecting
For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
Sounds like a quiet popping when playing music offline or online.
Also videos like youtube or anything will glitch for a second at random for no reason. I have factory reset this PC and have not fixed it yet. I don't know if it's windows 10 or this new PC but it is quite annoying My old PC that I gave away never had this problem, but it was also windows 7. Also I don't know the device or subcategory, but I had to put something :|
Démarrage anormal
Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Keyboard issues.
I've just updated to windows 10 May update, have now completely lost functionality of shift keys.
яркость
у меня на ноутбуке делл после обновления программы монитора пропал ползунок настройки яркости есть только ночной режим ина клавиатуре тоже не работает настройка яркости что делать уже не знаю
Microphones disabled
After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.
Disc Error
I have just reinstalled a new windows system to a new SSD HDD
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
My dispay turned pink
Hello, my display turned pink. I wonder if it is due to Auslogics activity. Can u help me resolve this? I am using Asus Laptop X505Z
блютуз гарнитура HONOR AM-61
Гарнитура сопряжается но не подключается к компьютеру, со смартфонам все работает
C922 Pro stream webcam
After initial total scan of my system the webcam is not working anymore.
Any idea ??
Any idea ??
Загрузка с SSD
Добрый день!
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Ipv4 and Ipv6 not connected
my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7