problem after running resolve all issues early this morning
I2C
What can you tell me about I2C This device cannot start. (Code 10).
I have tried many fixes with no success.
This is the Touch Screen driver in an HP Envy 360.
Thanks.
George Jamison
computer not turning on
cpu fan not spnning but other fan are spinning
i cleaned the fan but also not spinning
I tried other cpu fan but also not spinning
cannot boot into the windows
I would like to have some feedbag and your thoughts about(( Aspire V3-771-32328G75Makk))
Well this 8 years old laptop runs really smooth especially after i cleaned the fan. have learned alot about the hardware.
But.. i would like to play some games on it but there seems a problem with my videocard because intel dont support it anymore since windows 10. the questions are:
Can i upgrade this videocard?
Should i replace the Intel core i3-2328m cpu @ 2.20ghz to the I7 ?
And ifso yes is it worth it since the cost of hardware i need to buy then..
Sorry for the bad english.. (From Holland)
Kind regards!
https://tweakers.net/pricewatch/327051/acer-aspire-v3-771-32328g75makk/specificaties/
Загрузка с SSD
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
Print spooler issues
My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?
On the subject of Devices
Yes I have tried the sugestions you mentioned in the previous answer. Problem is, do I have to remember to Unchek the devices every time I do click on the maintenance button and undue again and again?
Problemas de apagado
Buenos dias. Mi Pc no apaga quedan encendido el ventilador de mi fuente de poder y el led del monitor. Gracias por su colaboracion
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
keyboard is working intermittently
I did some tweaks using Aulogics BoostSpeed 11. My keyboard is now working intermittently, but I'm not sure what tweak may have caused that. I will be typing and it will just stop recording my keystrokes for a few seconds, so I have to wait for a few seconds until the keyboard starts responding again. I have a new HP Envy laptop. Any suggestions? Thanks a lot.
p.s.: on the dropdown above for device, it gave me four options. I just selected what I think is the right one
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
Windows 10 Disc Optimizer
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
Система пишет , что принтер не подключен
Ipv4 and Ipv6 not connected
MFT failure
Printer Interference
Загрузка с SSD
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
graphics card
Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
slow internet
ps - just checked off the realtek as I have no idea where the problem is
after tweaking system using Auslogics, sound doesnt work. help pls
kindly help
thanks
No streaming sound after you scan and fix
Missing Printer Driver in Device Manager
I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.
Thank you
Steven
Проблема с интернетом
PC cannot see a webcam
Thanks in advance.
Disfonctionnement imprimante
Pourquoi après chaque mise à jour de votre produit, mon imrpimante ne fonctionne plus, je suis obligé de la désinstaller puis refaire une installation. ce qui du temps et de l'argent perdu. Si cela continu, je me verrai dans l'obligation de ma séparre de vos services.
Salutation.
Graphics Card
DNS SERVER NOT WORKING
Bluetooth devices can't connect
Necesito una solucion
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo