At first I want sincerely поблагодаритьВас for the remarkable Auslogics BoostSpeed 12 program. The computer has significantly increased performance both in working applications and in games. You're just masters of your business. So I decided to address you with my problem.
Periodic loss of sound for 1 second in the processor power supply mode "balanced," "high performance." In the "energy saving" mode, this is not! Is it possible to solve this problem? The drivers are fresh, so is Windows.
Respect, Yuri.

Is it safe to defrag a ssd drive or should optimize only be used

После исправления ошибок перестали работать порты на ноутбуке.... написало типа много используется устроств

почему использюеться много оеративной памяти до 85%

Добрый день, такая проблема:
HDD WD Purple 6 TB, во время работы видет себя тихо, даже если на него что-то скидываю или с него воспроивожу (ну или вообще, хоть что-то делается на компе, абсолютно все что угодно = треска нет)

Если комп стоит несколько минут без дела, то HDD начинает трещать
Стоит мне хотя бы мышку сдвинуть, треск исчезает

Как это устронить?

non riesco a pulire bene windows obsolete che di solito vengono eliminati comoletamente

Здравствуйте только купил клавиатуру Hyperx Alloe Fps Pro, где то час все было хорошо, потом клавиатура сама стала нажимать кнопки кнопка q работала как tab , потмо была ошибка что usb не видит код 43, подключил ее в другой порт, опять нажимает что хочешь, сайты открываются и тд, перезагрузил компьютер с включенной клавиатурой не загорался даже экран, без нее все хорошо, что делать?

Последнее время стал сильно греться жесткий диск хотя запустил комьютер 20-30 минут назад, а уже хоть руки грей

Неправильно работает видеокарта на производительность 1,5

Hello, my display turned pink. I wonder if it is due to Auslogics activity. Can u help me resolve this? I am using Asus Laptop X505Z

TROUBLE shoot then it say configeration correct but have dns server not responding and not getting the speed of 400mb I'm paying for.

Доброго времени суток. у меня случается проблема с жестким диском (seagate barracuda 1TB), при работе прогрмм находяшихся в нем, он часто вылетает. Замена сата порта и сата кабеля не помогает. Диск относил в сервес центр, говорят исправен. Помогает только ваша программа Auslogics boostSpeed, но помогает где то только на месяц пользования компьютером. Что мне делать?

Hello-

I'm not sure if this was the cause after running scans, but the 'Printer Driver' listed in the Device Manager has disaapeared. How to I get it back? I tried reinstalling the HP drivers the Printer Driver listed is still not there. I have 'Image Devices' listed with the HP Scanner driver listed (but nothing else). I have attached a pix of my Device Manager.

Thank you

Steven

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa

This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .