how do i go about cleaning up my pc's empty, non existant and duplicate files, programs, videos, etc

Why might my cameras not be detected since install?

Какой лучше в этой линейке адаптеров. Качество-производительность

I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error.  Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.

Will there ever be an Apple tool?

Ist BSSID dasselbe wie MAC-Adresse?

Eu gostaria de saber se esse software tem atualizações positivas para kit x99

Почему мой ноутбук в последнее время часто отключается?

После сканирования системы ноутбука пропал рабочий файл Excel (реестр). В справке пишет что находится не недоступном диске, просит вставить диск, хотя файл находился на ноутбуке. и появился новый пользователь, хотя я его не создавал.

I am trying to run disk clean up & compress the file to increase space in C drive but I am getting error that some of the file is not working properly. I have to skip some of the files then I am able to compress the system files.

warum fällt die tastatur bei einem notebook von captiva gekauft 01.01..2021 komplett aus diesess schreibe ich mit der bildschirmtastatur. neupreis: 1.459,- €

CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:

inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024

My good old Line 6 Toneport KB37, midi controller, and external soundcard combo stopped working on my new PC.

When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.

Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.

Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.

I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.

The same USB cable is being used on both PCs.

Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?

Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.

Is there an easy fix to get rid of an HDD 100% issue. Tried resetting RAM limits.

I have two external HD of exactly the same size, 3.63 TB, they both hace exactly the same amount of data stored on them both, 1.84 TB, 2240 files, 61 folders. My issue is that the "free space" shows a difference amount, 1.50 TB verse 1.55 TB. I have ensured that recycle bin on them both are empty and ran every program that would make sense with the confines of BoostSpeed 13 and nothing seems to make any difference. This isn't the only example of this sort of thing happening. I'm bewildered. Please advise.

By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.

Hi,

after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..

The new peocessor and motherboard are second hand ones..

We replaced CMOS battery but it did not solve the problem..

Any tips please?

Thank you

Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?

I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?

I want to know how my husband can get Auslogics on his side of our computer? He tried to download the new version but encountered an error! Is there a fix for this?

I have a pc and monitor and the cables got mixed up when moving house.
My monitor is Acer K222HQLBID 21.5 Inch HDMI Monitor.
My personal computer is PACKARD BELL - iMedia S 2885 Desktop PC

One of the cables is a 5amp cable and the other is a 10 amp cable. They both have the same connection at the other end to attach to the equipment.
I cannot find the manuals and am having no success online to find the answer.

Do you know which cable is for the monitor and which cable is for the personal computer.

Which devise is used with the 5 amp cable and which device is used with the 10 amp cable?

how can I change my function key default action