Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
MSCONFIG settings
I am curious , do you have settings needed for faster start ups of the msconfig settings ? For it will make start ups even faster in windows 10 or more than likly even in windows 7 & 8 as well.
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
NON SI APRE PIU' IMPOSTAZIONI IN WINDOWS
Chrome isn't in Volume Mixer, Windows 10
Any tips/suggestions to get the browser back to Volume mixer?
BSOD
I have new core i3 4130 with 500gb hard disk and 8 gb ram with all drivers updated but my windows crashes frequently I have scanned the whole pc no virus found then why is this happening?
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
100% disk usage
hi there, i am having a issue with my disk usage, my disk usage is at 100% a lot of the time when nothing is showing up in task manager as far as usage, any help on this issue would be greatly appreciated,
kind regards
pete
PC Randomly Resarts
My PC keeps restarting radomly. Some days its fine normaly while gaming. I went online and saw that your website said it could fix it. After following the steps i still have the issue.
Please can you help
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.
Hi there,
I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.
Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.
I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .
Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?
I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!
Kindly update me on a solution to this problem.
Many thanks,
Savio da Rocha Lobo,
Demande Information
Bonjour,
Comment faire pour Rechercher des fichiers doublons sur un Réseau NAS
Avec mes remerciements
Courtoisement
Jacques LOGEAY
Запрет на програмную смену фокуса
Добрый день. Вопрос один, может подскажите, как то можно без сторонего софта(в реестре может), ограничить право программам переключать фокус между окнами? Т.е. например какая-то программа в фоне запускает новое окно, и оно открывается по верх текущего(активного).
Ну грубо говоря программа обновлялась апдейтером, и по завершению обновления запустилась, таким образом переключив фокус на себя
Blocked URL's
Sir,
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard
Thank you so much for your support.
Alex Janssens (Iepenburger)
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Windows 10 Disc Optimizer
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride