Should I be concerned about this? What does this mean?
thank you for your response(s).
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 220.127.116.11 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Before I started to use Auslogics my computer was very slow. Then I used your Auslogics and the computer was much faster. However, few days aftrer it become slow again from day to day. Every few days i do full Scan and Clean and it help a little bit (it become a bit faster , but not as it was the first time i did the first scan and then again after few hours it become slow again,
My other device has ATOM x5 8350 / 2Gb Ram / 32 GB SSD
Running WIndows Home
Is there a list of windows services that I can disable in order to get it as lean and functional as possible?
I bought it used and I cannot believe people find these devices functional at all.
Call it a summer project...
I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается так как раньше.
Ноутбук был приобретен новым и я единственный владец. Раньше всё было в порядке. Установка вашего ПО и запуск всех инструментов пока ничего не дал. Я не могу понять в чём причина?
Ваш софт и фирменный софт Dell сообщает что АКБ находится в отличном состоянии. Сама Windows 7 pro показывает что АКБ подключена к З/У, но сообщает что АКБ не заряжается. АКБ не заряжается даже при полном выключении или перезагрузке ноутбука.
Как решение я вижу возможность также перепрошить BIOS. Пожалуйста, помогите решить вопрос.
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.