1794 questions

Bricked my HP Evo Prod ID 669a1ua after driver update

So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
285 views
Sep 13, 2023 at 08:52 PM

low speed of windows

Hi
the speed of my windows is low
what can i do for this
313 views
Sep 11, 2023 at 02:42 PM

message

high system resourxce notification--change settings.What do i do to rectify thuis matter?
324 views
Sep 10, 2023 at 12:59 PM

ドライバーアップデーター

ドライバーアップデーターがファイイヤーウオールの設定を確認してくださいと表示されます
279 views
Sep 10, 2023 at 12:11 AM

usage

not good working
333 views
Sep 09, 2023 at 06:23 AM

Windows Update

Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
301 views
Sep 09, 2023 at 02:19 AM

DRIVER UPDATER REFUSES TO CONNECT

Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
519 views
Sep 07, 2023 at 07:29 PM

heute kein Zugang zum Abruf der Treiber-Daten

Gibt es ein technisches Problem beim Zugang zum Datenserver?
270 views
Sep 07, 2023 at 02:18 PM

windows search

não consigo usar a janela de activar ou desativar funções do windows
267 views
Sep 06, 2023 at 11:26 PM

Mots de passe

Bonjour,

BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?

Cordialement
Denis Schmitt
306 views
Sep 06, 2023 at 05:34 PM

USB

I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
296 views
Sep 06, 2023 at 05:11 PM

Luz noturna

A luz noturna deixou de funcionar, não posso mudar para a cor mais suave
275 views
Sep 04, 2023 at 05:13 PM

Anti-virus

Bonjour !!

J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.

Dois-je craindre la même chose avec CCLEANER ?

Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...

Cordialement,

Eric
275 views
Sep 02, 2023 at 07:49 AM

Velocidad de la computadora

¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
319 views
Sep 01, 2023 at 08:33 PM

Trial

Hey huge fan and long time user of the free edition and was wondering can i get a week trial please as im thinking of buying ? My PC is still running crappy


Thanks in Advance
329 views
Sep 01, 2023 at 08:04 PM

Fehlermeldung

Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:

failed download failure

was verhindert die Aktuallisierung bei dem Programm.

Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro

mfg Klaus Schwabe
307 views
Aug 31, 2023 at 10:32 PM

Problème fonctionnement Bluetooth

Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
320 views
Aug 31, 2023 at 10:07 AM

Intel Graphics Installer Not Prompt Back After Loading For Install

Dear Sir /Madam,

I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
456 views
Aug 31, 2023 at 02:54 AM

BIOS findet SATA Festplatte nicht.

Wie finde ich Password für BIOS Einstellungen?
377 views
Aug 30, 2023 at 12:53 PM

ПРОГРАММЫ

ГДЕ ЛУЧШИИ САЙТЫ ДЛЯ СКАЧИВАНИЯ ПРОГРАММ ДЛЯ НОУТА
292 views
Aug 29, 2023 at 01:52 PM

FIX: bdservicehost high cpu / memory usage

FIX: bdservicehost high cpu / memory usage.
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/

my hard drive is WDC W10 EZEX
4027 views
Nov 16, 2021 at 08:57 PM

An error occurred while loading Library.dll

When loading Auslogics Disk Defragmenter, I get the following message box:

Auslogics Disk Defrag 9

An error occurred while loading Library.dll.

Error code: 0x0000007E
Error message: The specified module could not be found.

I've tried to uninstall the program, but get the message box:

Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613

Thanks

Nick

3117 views
Mar 03, 2020 at 03:46 AM

built in Dell Inspiron laptop Realtek microphone

My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.

2648 views
May 21, 2020 at 08:41 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2622 views
Apr 22, 2020 at 01:56 PM

Time Lag with using both mouse and keyboard; Slow Computer

Can you tell me how to fix wireless mouse and keyboard lag? My computer is running slow and ran One Click Scanner, Updated all BIOS firmware, Windows 10 and Device Drivers, ran virus and malware applications, did a clean install of Windows 10, eliminated and reinstalled mouse and keyboard drivers, replaced monitor, graphics card and its driver, defragged drives, removed cloud-based backup storage, and removed non-essential processes and software.

At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:

BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.


Ron
2027 views
Sep 11, 2019 at 08:40 PM

MalwareBytes pups

How can I prevent MalwareBytes from regarding you as a pup?

1947 views
Jan 14, 2020 at 01:52 AM

Why I am seriously upset

Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes

That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name

1933 views
Jan 22, 2020 at 12:13 AM

Bought a TP link Bleutooth usb

Dear Support,

I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.

I need the old driver from windows apperently that is not bluesoleil as this is not responding.

The Bleutooth usnb device i can see in the list of devices but will not react.


Thank you fore th help as suh.

regards Rob.

1904 views
May 12, 2020 at 07:48 PM

Notifications

I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.

1853 views
Feb 13, 2020 at 01:03 PM

Плохой пинг

Привет, если сможите, помогите пж. Плохой пинг во всех инет играх
1852 views
Feb 04, 2021 at 06:22 PM

wondpws 10 don't boot

Hello,

My windows 10 home can not boot after a registry cleanup. It was stopped at the laptop logo and not going thro. Later attenpt to boot shows bluescreen with "BAD SYSTEM CONFIG INFO".

I have tried BCD fix, but got "access denied". I tried rewrite config, but my Regback is empty with no backup reg files. Please advise how can I get the thro?

Thank you.
1836 views
Jun 09, 2021 at 08:00 PM

ESENT Help.

svchost (3804, R, 98) SRUJet: New log file cannot be created because the database cannot write to the log drive. The drive may be read-only, out of free disk space, misconfigured, or corrupt. Error -1032.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
1789 views
Feb 25, 2021 at 10:36 AM

MSFS

Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous

1761 views
Nov 19, 2020 at 10:31 AM

Driver power state failure

Driver power state failure , this is not getting ressolved even after updating all drivers of the system. Tried various methods listed on the internet, changed settings many times. Even Auslogic couldn't solve it.

1755 views
Mar 01, 2020 at 06:05 PM

Auslogics BoostSpeed 13

When (date) should we expect BoostSpeed to become available?
1743 views
Mar 20, 2022 at 04:54 PM

I cannot reinstall ScanSnap software

I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.

But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!

Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.

1724 views
Mar 08, 2020 at 08:21 PM

Drivers

Your driver updater for Wifi 6 AX200 from the driver updater program, cause HUGE throughput issues....
Tests went from 40mbit to 900+mbit (maxing out my connection) when connected to wifi AX.

Thanks

1719 views
Jan 25, 2021 at 01:57 AM

I could not update the Drvers

I have problems on Diver Updater: I could not update my old drivers with the update drivers from you, When I do the mouse pad is not working any more. I have to restore the system. I need your help to update the Drivers.

1700 views
Nov 17, 2019 at 09:10 AM

Language Bar Missing

Why my language bar is missing (on taskbar) after use this application.

1656 views
May 12, 2020 at 11:51 AM

Bluetooth

Hello, I can't turn on Bluetooth, the device is visible in the device Manager, Windows 10 does not turn on

1624 views
Sep 13, 2020 at 10:19 AM